Commit 65f79683 authored by Tony Lindgren's avatar Tony Lindgren Committed by Greg Kroah-Hartman

PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend

commit bed57030 upstream.

I noticed some wakeirq flakeyness with consumer drivers not using
autosuspend. For drivers not using autosuspend, the wakeirq may never
get unmasked in rpm_suspend() because of irq desc->depth.

We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we
naturally don't want them running until rpm_suspend() is called.

However, when a consumer driver initially calls pm_runtime_get(), we
now wrongly start with disable_irq_nosync() call on the dedicated
wakeirq that is disabled to start with.

This causes desc->depth to toggle between 1 and 2 instead of the usual
0 and 1. This can prevent enable_irq() from unmasking the wakeirq as
that only happens at desc->depth 1.

This does not necessarily show up with drivers using autosuspend as
there is time for disable_irq_nosync() before rpm_suspend() gets called
after the autosuspend timeout.

Let's fix the issue by adding wirq->status that lazily gets set on
the first rpm_suspend(). We also need PM runtime core private functions
for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check()
so we can enable the dedicated wakeirq on the first rpm_suspend().

While at it, let's also fix the comments for dev_pm_enable_wake_irq()
and dev_pm_disable_wake_irq(). Those can still be used by the consumer
drivers as needed because the IRQ core manages the interrupt usecount
for us.

Fixes: 4990d4fe (PM / Wakeirq: Add automated device wake IRQ handling)
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 3b198ddd
......@@ -21,14 +21,22 @@ extern void pm_runtime_init(struct device *dev);
extern void pm_runtime_reinit(struct device *dev);
extern void pm_runtime_remove(struct device *dev);
#define WAKE_IRQ_DEDICATED_ALLOCATED BIT(0)
#define WAKE_IRQ_DEDICATED_MANAGED BIT(1)
#define WAKE_IRQ_DEDICATED_MASK (WAKE_IRQ_DEDICATED_ALLOCATED | \
WAKE_IRQ_DEDICATED_MANAGED)
struct wake_irq {
struct device *dev;
unsigned int status;
int irq;
bool dedicated_irq:1;
};
extern void dev_pm_arm_wake_irq(struct wake_irq *wirq);
extern void dev_pm_disarm_wake_irq(struct wake_irq *wirq);
extern void dev_pm_enable_wake_irq_check(struct device *dev,
bool can_change_status);
extern void dev_pm_disable_wake_irq_check(struct device *dev);
#ifdef CONFIG_PM_SLEEP
......@@ -104,6 +112,15 @@ static inline void dev_pm_disarm_wake_irq(struct wake_irq *wirq)
{
}
static inline void dev_pm_enable_wake_irq_check(struct device *dev,
bool can_change_status)
{
}
static inline void dev_pm_disable_wake_irq_check(struct device *dev)
{
}
#endif
#ifdef CONFIG_PM_SLEEP
......
......@@ -515,7 +515,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_suspend);
dev_pm_enable_wake_irq(dev);
dev_pm_enable_wake_irq_check(dev, true);
retval = rpm_callback(callback, dev);
if (retval)
goto fail;
......@@ -554,7 +554,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
return retval;
fail:
dev_pm_disable_wake_irq(dev);
dev_pm_disable_wake_irq_check(dev);
__update_runtime_status(dev, RPM_ACTIVE);
dev->power.deferred_resume = false;
wake_up_all(&dev->power.wait_queue);
......@@ -737,12 +737,12 @@ static int rpm_resume(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_resume);
dev_pm_disable_wake_irq(dev);
dev_pm_disable_wake_irq_check(dev);
retval = rpm_callback(callback, dev);
if (retval) {
__update_runtime_status(dev, RPM_SUSPENDED);
pm_runtime_cancel_pending(dev);
dev_pm_enable_wake_irq(dev);
dev_pm_enable_wake_irq_check(dev, false);
} else {
no_callback:
__update_runtime_status(dev, RPM_ACTIVE);
......
......@@ -110,8 +110,10 @@ void dev_pm_clear_wake_irq(struct device *dev)
dev->power.wakeirq = NULL;
spin_unlock_irqrestore(&dev->power.lock, flags);
if (wirq->dedicated_irq)
if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED) {
free_irq(wirq->irq, wirq);
wirq->status &= ~WAKE_IRQ_DEDICATED_MASK;
}
kfree(wirq);
}
EXPORT_SYMBOL_GPL(dev_pm_clear_wake_irq);
......@@ -179,7 +181,6 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
wirq->dev = dev;
wirq->irq = irq;
wirq->dedicated_irq = true;
irq_set_status_flags(irq, IRQ_NOAUTOEN);
/*
......@@ -195,6 +196,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
if (err)
goto err_free_irq;
wirq->status = WAKE_IRQ_DEDICATED_ALLOCATED;
return err;
err_free_irq:
......@@ -210,9 +213,9 @@ EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq);
* dev_pm_enable_wake_irq - Enable device wake-up interrupt
* @dev: Device
*
* Called from the bus code or the device driver for
* runtime_suspend() to enable the wake-up interrupt while
* the device is running.
* Optionally called from the bus code or the device driver for
* runtime_resume() to override the PM runtime core managed wake-up
* interrupt handling to enable the wake-up interrupt.
*
* Note that for runtime_suspend()) the wake-up interrupts
* should be unconditionally enabled unlike for suspend()
......@@ -222,7 +225,7 @@ void dev_pm_enable_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
if (wirq && wirq->dedicated_irq)
if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED))
enable_irq(wirq->irq);
}
EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
......@@ -231,19 +234,72 @@ EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
* dev_pm_disable_wake_irq - Disable device wake-up interrupt
* @dev: Device
*
* Called from the bus code or the device driver for
* runtime_resume() to disable the wake-up interrupt while
* the device is running.
* Optionally called from the bus code or the device driver for
* runtime_suspend() to override the PM runtime core managed wake-up
* interrupt handling to disable the wake-up interrupt.
*/
void dev_pm_disable_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
if (wirq && wirq->dedicated_irq)
if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED))
disable_irq_nosync(wirq->irq);
}
EXPORT_SYMBOL_GPL(dev_pm_disable_wake_irq);
/**
* dev_pm_enable_wake_irq_check - Checks and enables wake-up interrupt
* @dev: Device
* @can_change_status: Can change wake-up interrupt status
*
* Enables wakeirq conditionally. We need to enable wake-up interrupt
* lazily on the first rpm_suspend(). This is needed as the consumer device
* starts in RPM_SUSPENDED state, and the the first pm_runtime_get() would
* otherwise try to disable already disabled wakeirq. The wake-up interrupt
* starts disabled with IRQ_NOAUTOEN set.
*
* Should be only called from rpm_suspend() and rpm_resume() path.
* Caller must hold &dev->power.lock to change wirq->status
*/
void dev_pm_enable_wake_irq_check(struct device *dev,
bool can_change_status)
{
struct wake_irq *wirq = dev->power.wakeirq;
if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
return;
if (likely(wirq->status & WAKE_IRQ_DEDICATED_MANAGED)) {
goto enable;
} else if (can_change_status) {
wirq->status |= WAKE_IRQ_DEDICATED_MANAGED;
goto enable;
}
return;
enable:
enable_irq(wirq->irq);
}
/**
* dev_pm_disable_wake_irq_check - Checks and disables wake-up interrupt
* @dev: Device
*
* Disables wake-up interrupt conditionally based on status.
* Should be only called from rpm_suspend() and rpm_resume() path.
*/
void dev_pm_disable_wake_irq_check(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
return;
if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED)
disable_irq_nosync(wirq->irq);
}
/**
* dev_pm_arm_wake_irq - Arm device wake-up
* @wirq: Device wake-up interrupt
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment