Skip to content

L
linux
Commit 6623146c authored by Vineet Gupta's avatar Vineet Gupta
Browse files
Options

ARC: [arcfpga] RIP legacy ISS based SMP extension 

With ISS long unsupported, no point in having extension based on it
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 40b552d9
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 329 deletions
arch/arc/plat-arcfpga/Kconfig
View file @ 6623146c
......@@ -14,20 +14,3 @@ menuconfig ARC_PLAT_FPGA_LEGACY
These are based on FPGA or ISS. e.g.
- ARCAngel4
- ML509
- MetaWare ISS
if ARC_PLAT_FPGA_LEGACY
config ISS_SMP_EXTN
bool "ARC SMP Extensions (ISS Models only)"
default n
depends on SMP
help
SMP Extensions to ARC700, in a "simulation only" Model, supported in
ARC ISS (Instruction Set Simulator).
The SMP extensions include:
-IDU (Interrupt Distribution Unit)
-XTL (To enable CPU start/stop/set-PC for another CPU)
It doesn't provide coherent Caches and/or Atomic Ops (LLOCK/SCOND)
endif
arch/arc/plat-arcfpga/Makefile
View file @ 6623146c
......@@ -6,7 +6,4 @@
# published by the Free Software Foundation.
#
KBUILD_CFLAGS += -Iarch/arc/plat-arcfpga/include
obj-y := platform.o
obj-$(CONFIG_ISS_SMP_EXTN) += smp.o
arch/arc/plat-arcfpga/include/plat/smp.h deleted 100644 → 0
View file @ 40b552d9
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Rajeshwar Ranga: Interrupt Distribution Unit API's
*/
#ifndef __PLAT_ARCFPGA_SMP_H
#define __PLAT_ARCFPGA_SMP_H
#ifdef CONFIG_SMP
#include <linux/types.h>
#include <asm/arcregs.h>
#define ARC_AUX_IDU_REG_CMD 0x2000
#define ARC_AUX_IDU_REG_PARAM 0x2001
#define ARC_AUX_XTL_REG_CMD 0x2002
#define ARC_AUX_XTL_REG_PARAM 0x2003
#define ARC_REG_MP_BCR 0x2021
#define ARC_XTL_CMD_WRITE_PC 0x04
#define ARC_XTL_CMD_CLEAR_HALT 0x02
/*
* Build Configuration Register which identifies the sub-components
*/
struct bcr_mp {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int mp_arch:16, pad:5, sdu:1, idu:1, scu:1, ver:8;
#else
unsigned int ver:8, scu:1, idu:1, sdu:1, pad:5, mp_arch:16;
#endif
};
/* IDU supports 256 common interrupts */
#define NR_IDU_IRQS 256
/*
* The Aux Regs layout is same bit-by-bit in both BE/LE modes.
* However when casted as a bitfield encoded "C" struct, gcc treats it as
* memory, generating different code for BE/LE, requiring strcture adj (see
* include/asm/arcregs.h)
*
* However when manually "carving" the value for a Aux, no special handling
* of BE is needed because of the property discribed above
*/
#define IDU_SET_COMMAND(irq, cmd) \
do { \
uint32_t __val; \
__val = (((irq & 0xFF) << 8) | (cmd & 0xFF)); \
write_aux_reg(ARC_AUX_IDU_REG_CMD, __val); \
} while (0)
#define IDU_SET_PARAM(par) write_aux_reg(ARC_AUX_IDU_REG_PARAM, par)
#define IDU_GET_PARAM() read_aux_reg(ARC_AUX_IDU_REG_PARAM)
/* IDU Commands */
#define IDU_DISABLE 0x00
#define IDU_ENABLE 0x01
#define IDU_IRQ_CLEAR 0x02
#define IDU_IRQ_ASSERT 0x03
#define IDU_IRQ_WMODE 0x04
#define IDU_IRQ_STATUS 0x05
#define IDU_IRQ_ACK 0x06
#define IDU_IRQ_PEND 0x07
#define IDU_IRQ_RMODE 0x08
#define IDU_IRQ_WBITMASK 0x09
#define IDU_IRQ_RBITMASK 0x0A
#define idu_enable() IDU_SET_COMMAND(0, IDU_ENABLE)
#define idu_disable() IDU_SET_COMMAND(0, IDU_DISABLE)
#define idu_irq_assert(irq) IDU_SET_COMMAND((irq), IDU_IRQ_ASSERT)
#define idu_irq_clear(irq) IDU_SET_COMMAND((irq), IDU_IRQ_CLEAR)
/* IDU Interrupt Mode - Destination Encoding */
#define IDU_IRQ_MOD_DISABLE 0x00
#define IDU_IRQ_MOD_ROUND_RECP 0x01
#define IDU_IRQ_MOD_TCPU_FIRSTRECP 0x02
#define IDU_IRQ_MOD_TCPU_ALLRECP 0x03
/* IDU Interrupt Mode - Triggering Mode */
#define IDU_IRQ_MODE_LEVEL_TRIG 0x00
#define IDU_IRQ_MODE_PULSE_TRIG 0x01
#define IDU_IRQ_MODE_PARAM(dest_mode, trig_mode) \
(((trig_mode & 0x01) << 15) | (dest_mode & 0xFF))
struct idu_irq_config {
uint8_t irq;
uint8_t dest_mode;
uint8_t trig_mode;
};
struct idu_irq_status {
uint8_t irq;
bool enabled;
bool status;
bool ack;
bool pend;
uint8_t next_rr;
};
extern void idu_irq_set_tgtcpu(uint8_t irq, uint32_t mask);
extern void idu_irq_set_mode(uint8_t irq, uint8_t dest_mode, uint8_t trig_mode);
extern void iss_model_init_smp(unsigned int cpu);
extern void iss_model_init_early_smp(void);
#endif /* CONFIG_SMP */
#endif
arch/arc/plat-arcfpga/platform.c
View file @ 6623146c
......@@ -10,7 +10,6 @@
#include <linux/init.h>
#include <asm/mach_desc.h>
#include <plat/smp.h>
/*----------------------- Machine Descriptions ------------------------------
*
......@@ -28,10 +27,6 @@ static const char *legacy_fpga_compat[] __initconst = {
MACHINE_START(LEGACY_FPGA, "legacy_fpga")
.dt_compat = legacy_fpga_compat,
#ifdef CONFIG_ISS_SMP_EXTN
.init_early = iss_model_init_early_smp,
.init_smp = iss_model_init_smp,
#endif
MACHINE_END
static const char *simulation_compat[] __initconst = {
......
arch/arc/plat-arcfpga/smp.c deleted 100644 → 0
View file @ 40b552d9
/*
* ARC700 Simulation-only Extensions for SMP
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Vineet Gupta - 2012 : split off arch common and plat specific SMP
* Rajeshwar Ranga - 2007 : Interrupt Distribution Unit API's
*/
#include <linux/smp.h>
#include <linux/irq.h>
#include <plat/smp.h>
#define IDU_INTERRUPT_0 16
static char smp_cpuinfo_buf[128];
/*
*-------------------------------------------------------------------
* Platform specific callbacks expected by arch SMP code
*-------------------------------------------------------------------
*/
/*
* Master kick starting another CPU
*/
static void iss_model_smp_wakeup_cpu(int cpu, unsigned long pc)
{
/* setup the start PC */
write_aux_reg(ARC_AUX_XTL_REG_PARAM, pc);
/* Trigger WRITE_PC cmd for this cpu */
write_aux_reg(ARC_AUX_XTL_REG_CMD,
(ARC_XTL_CMD_WRITE_PC | (cpu << 8)));
/* Take the cpu out of Halt */
write_aux_reg(ARC_AUX_XTL_REG_CMD,
(ARC_XTL_CMD_CLEAR_HALT | (cpu << 8)));
}
static inline int get_hw_config_num_irq(void)
{
uint32_t val = read_aux_reg(ARC_REG_VECBASE_BCR);
switch (val & 0x03) {
case 0:
return 16;
case 1:
return 32;
case 2:
return 8;
default:
return 0;
}
return 0;
}
/*
* Any SMP specific init any CPU does when it comes up.
* Here we setup the CPU to enable Inter-Processor-Interrupts
* Called for each CPU
* -Master : init_IRQ()
* -Other(s) : start_kernel_secondary()
*/
void iss_model_init_smp(unsigned int cpu)
{
/* Check if CPU is configured for more than 16 interrupts */
if (NR_IRQS <= 16 || get_hw_config_num_irq() <= 16)
panic("[arcfpga] IRQ system can't support IDU IPI\n");
idu_disable();
/****************************************************************
* IDU provides a set of Common IRQs, each of which can be dynamically
* attached to (1|many|all) CPUs.
* The Common IRQs [0-15] are mapped as CPU pvt [16-31]
*
* Here we use a simple 1:1 mapping:
* A CPU 'x' is wired to Common IRQ 'x'.
* So an IDU ASSERT on IRQ 'x' will trigger Interupt on CPU 'x', which
* makes up for our simple IPI plumbing.
*
* TBD: Have a dedicated multicast IRQ for sending IPIs to all CPUs
* w/o having to do one-at-a-time
******************************************************************/
/*
* Claim an IRQ which would trigger IPI on this CPU.
* In IDU parlance it involves setting up a cpu bitmask for the IRQ
* The bitmap here contains only 1 CPU (self).
*/
idu_irq_set_tgtcpu(cpu, 0x1 << cpu);
/* Set the IRQ destination to use the bitmask above */
idu_irq_set_mode(cpu, 7, /* XXX: IDU_IRQ_MOD_TCPU_ALLRECP: ISS bug */
IDU_IRQ_MODE_PULSE_TRIG);
idu_enable();
/* Attach the arch-common IPI ISR to our IDU IRQ */
smp_ipi_irq_setup(cpu, IDU_INTERRUPT_0 + cpu);
}
static void iss_model_ipi_send(int cpu)
{
idu_irq_assert(cpu);
}
static void iss_model_ipi_clear(int irq)
{
idu_irq_clear(IDU_INTERRUPT_0 + smp_processor_id());
}
void iss_model_init_early_smp(void)
{
#define IS_AVAIL1(var, str) ((var) ? str : "")
struct bcr_mp mp;
READ_BCR(ARC_REG_MP_BCR, mp);
sprintf(smp_cpuinfo_buf, "Extn [ISS-SMP]: v%d, arch(%d) %s %s %s\n",
mp.ver, mp.mp_arch, IS_AVAIL1(mp.scu, "SCU"),
IS_AVAIL1(mp.idu, "IDU"), IS_AVAIL1(mp.sdu, "SDU"));
plat_smp_ops.info = smp_cpuinfo_buf;
plat_smp_ops.cpu_kick = iss_model_smp_wakeup_cpu;
plat_smp_ops.ipi_send = iss_model_ipi_send;
plat_smp_ops.ipi_clear = iss_model_ipi_clear;
}
/*
*-------------------------------------------------------------------
* Low level Platform IPI Providers
*-------------------------------------------------------------------
*/
/* Set the Mode for the Common IRQ */
void idu_irq_set_mode(uint8_t irq, uint8_t dest_mode, uint8_t trig_mode)
{
uint32_t par = IDU_IRQ_MODE_PARAM(dest_mode, trig_mode);
IDU_SET_PARAM(par);
IDU_SET_COMMAND(irq, IDU_IRQ_WMODE);
}
/* Set the target cpu Bitmask for Common IRQ */
void idu_irq_set_tgtcpu(uint8_t irq, uint32_t mask)
{
IDU_SET_PARAM(mask);
IDU_SET_COMMAND(irq, IDU_IRQ_WBITMASK);
}
/* Get the Interrupt Acknowledged status for IRQ (as CPU Bitmask) */
bool idu_irq_get_ack(uint8_t irq)
{
uint32_t val;
IDU_SET_COMMAND(irq, IDU_IRQ_ACK);
val = IDU_GET_PARAM();
return val & (1 << irq);
}
/*
* Get the Interrupt Pending status for IRQ (as CPU Bitmask)
* -Pending means CPU has not yet noticed the IRQ (e.g. disabled)
* -After Interrupt has been taken, the IPI expcitily needs to be
* cleared, to be acknowledged.
*/
bool idu_irq_get_pend(uint8_t irq)
{
uint32_t val;
IDU_SET_COMMAND(irq, IDU_IRQ_PEND);
val = IDU_GET_PARAM();
return val & (1 << irq);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7