Commit 665c9c03 authored by Kumar Gala's avatar Kumar Gala

ARM: dts: qcom: Update msm8960 device trees

* Move SoC peripherals into an SoC container node
* Move serial enabling into board file (qcom-msm8960-cdp.dts)
* Cleanup cpu node to match binding spec, enable-method and compatible
  should be per cpu, not part of the container
* Drop interrupts property from l2-cache node as its not part of the
  binding spec
* Add GSBI node and configuration of GSBI controller
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
parent ba08220a
......@@ -3,4 +3,14 @@
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
soc {
gsbi@16400000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16440000 {
status = "ok";
};
};
};
};
......@@ -3,6 +3,7 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
model = "Qualcomm MSM8960";
......@@ -13,10 +14,10 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 14 0x304>;
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
......@@ -25,6 +26,8 @@ cpu@0 {
};
cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
......@@ -35,7 +38,6 @@ cpu@1 {
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
interrupts = <0 2 0x4>;
};
};
......@@ -45,91 +47,109 @@ cpu-pmu {
qcom,no-pc-write;
};
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02000000 0x1000 >,
< 0x02002000 0x1000 >;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
};
timer@200a000 {
compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
<1 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x80000>;
};
timer@200a000 {
compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>,
<1 2 0x301>,
<1 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x80000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
gpio-controller;
#gpio-cells = <2>;
ngpio = <150>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
gpio-controller;
#gpio-cells = <2>;
ngpio = <150>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
};
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
saw0: regulator@2089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
};
saw0: regulator@2089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
};
saw1: regulator@2099000 {
compatible = "qcom,saw2";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
};
saw1: regulator@2099000 {
compatible = "qcom,saw2";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
};
serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
interrupts = <0 154 0x0>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
};
gsbi5: gsbi@16400000 {
compatible = "qcom,gsbi-v1.0.0";
reg = <0x16400000 0x100>;
clocks = <&gcc GSBI5_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
interrupts = <0 154 0x0>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
rng@1a500000 {
compatible = "qcom,prng";
reg = <0x1a500000 0x200>;
clocks = <&gcc PRNG_CLK>;
clock-names = "core";
rng@1a500000 {
compatible = "qcom,prng";
reg = <0x1a500000 0x200>;
clocks = <&gcc PRNG_CLK>;
clock-names = "core";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment