net: phy: realtek: enable ALDPS to save power for RTL8211F

Enable ALDPS(Advanced Link Down Power Saving) to save power when
link down.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/realtek.c

@@ -27,11 +27,16 @@
 #define RTL821x_EXT_PAGE_SELECT			0x1e
 #define RTL821x_PAGE_SELECT			0x1f
 
+#define RTL8211F_PHYCR1				0x18
 #define RTL8211F_INSR				0x1d
 
 #define RTL8211F_TX_DELAY			BIT(8)
 #define RTL8211F_RX_DELAY			BIT(3)
 
+#define RTL8211F_ALDPS_PLL_OFF			BIT(1)
+#define RTL8211F_ALDPS_ENABLE			BIT(2)
+#define RTL8211F_ALDPS_XTAL_OFF			BIT(12)
+
 #define RTL8211E_TX_DELAY			BIT(1)
 #define RTL8211E_RX_DELAY			BIT(2)
 #define RTL8211E_MODE_MII_GMII			BIT(3)
@@ -178,8 +183,12 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	u16 val_txdly, val_rxdly;
+	u16 val;
 	int ret;
 
+	val = RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_XTAL_OFF;
+	phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, val, val);
+
 	switch (phydev->interface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		val_txdly = 0;