Commit 6716b3d8 authored by Gabor Juhos's avatar Gabor Juhos Committed by John W. Linville

rt2x00: rt2800pci: use separate set_state callback for SoC devices

The 'rt2800pci_set_state' function uses MCU commands
to set the device state, however these have no effect
on SoC devices. Use a different set_state callback
which does not use the MCU fcuntions.
Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 899a5f49
......@@ -246,6 +246,7 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
}
}
#ifdef CONFIG_PCI
static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
......@@ -304,7 +305,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
return retval;
}
#ifdef CONFIG_PCI
/*
* Device probe functions.
*/
......@@ -480,6 +480,45 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
MODULE_LICENSE("GPL");
#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
int retval = 0;
switch (state) {
case STATE_RADIO_ON:
retval = rt2800pci_enable_radio(rt2x00dev);
break;
case STATE_RADIO_OFF:
rt2800pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_OFF:
rt2800mmio_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
case STATE_STANDBY:
case STATE_AWAKE:
/* These states are not supported, but don't report an error */
retval = 0;
break;
default:
retval = -ENOTSUPP;
break;
}
if (unlikely(retval))
rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
state, retval);
return retval;
}
static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
......@@ -578,7 +617,7 @@ static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
.uninitialize = rt2x00mmio_uninitialize,
.get_entry_state = rt2800mmio_get_entry_state,
.clear_entry = rt2800mmio_clear_entry,
.set_device_state = rt2800pci_set_device_state,
.set_device_state = rt2800soc_set_device_state,
.rfkill_poll = rt2800_rfkill_poll,
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment