NOR flash drivers update

 - Handle cached access to flash chips on supporting platforms
 - Handle arrangements of chips larger than a single bus width
 - Clean up the AMD/Fujitsu chip driver
 - Update board 'mapping' drivers to match
 - New mapping drivers for new platforms.

drivers/mtd/Kconfig

-# $Id: Kconfig,v 1.3 2003/05/28 11:02:23 dwmw2 Exp $
+# $Id: Kconfig,v 1.5 2004/06/04 15:59:32 gleixner Exp $
 
 menu "Memory Technology Devices (MTD)"
 
@@ -68,9 +68,23 @@ config MTD_REDBOOT_PARTS
 	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 
 	  example.
 
+config MTD_REDBOOT_PARTS_UNALLOCATED
+	bool "  Include unallocated flash regions"
+	depends on MTD_REDBOOT_PARTS
+	help
+	  If you need to register each unallocated flash region as a MTD
+	  'partition', enable this option.
+
+config MTD_REDBOOT_PARTS_READONLY
+	bool "  Force read-only for RedBoot system images"
+	depends on MTD_REDBOOT_PARTS
+	help
+	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
+	  'FIS directory' images, enable this option.
+
 config MTD_CMDLINE_PARTS
-	tristate "Command line partition table parsing"
-	depends on MTD_PARTITIONS
+	bool "Command line partition table parsing"
+	depends on MTD_PARTITIONS = "y"
 	---help---
 	  Allow generic configuration of the MTD paritition tables via the kernel
 	  command line. Multiple flash resources are supported for hardware where

drivers/mtd/Makefile

 #
 # Makefile for the memory technology device drivers.
 #
-# $Id: Makefile.common,v 1.2 2003/05/23 11:38:29 dwmw2 Exp $
-
-#                       *** BIG UGLY NOTE ***
-#
-# The shiny new inter_module_xxx has introduced yet another ugly link
-# order dependency, which I'd previously taken great care to avoid.
-# We now have to ensure that the chip drivers are initialised before the
-# map drivers, and that the doc200[01] drivers are initialised before
-# docprobe.
-#
-# We'll hopefully merge the doc200[01] drivers and docprobe back into
-# a single driver some time soon, but the CFI drivers are going to have
-# to stay like that.
-#
-# Urgh.
-# 
-# dwmw2 21/11/0
+# $Id: Makefile.common,v 1.3 2004/07/12 16:07:30 dwmw2 Exp $
 
 # Core functionality.
 obj-$(CONFIG_MTD)		+= mtdcore.o

drivers/mtd/chips/Kconfig

 # drivers/mtd/chips/Kconfig
-# $Id: Kconfig,v 1.3 2003/05/28 15:13:24 dwmw2 Exp $
+# $Id: Kconfig,v 1.8 2004/07/13 22:32:02 dwmw2 Exp $
 
 menu "RAM/ROM/Flash chip drivers"
 	depends on MTD!=n
@@ -85,59 +85,72 @@ config MTD_CFI_GEOMETRY
 	  arrangements of CFI chips. If unsure, say 'N' and all options 
 	  which are supported by the current code will be enabled.
 
-config MTD_CFI_B1
-	bool "Support  8-bit buswidth"
-	depends on MTD_CFI_GEOMETRY
+config MTD_MAP_BANK_WIDTH_1
+	bool "Support  8-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
 	help
 	  If you wish to support CFI devices on a physical bus which is
 	  8 bits wide, say 'Y'.
 
-config MTD_CFI_B2
-	bool "Support 16-bit buswidth"
-	depends on MTD_CFI_GEOMETRY
+config MTD_MAP_BANK_WIDTH_2
+	bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
 	help
 	  If you wish to support CFI devices on a physical bus which is
 	  16 bits wide, say 'Y'.
 
-config MTD_CFI_B4
-	bool "Support 32-bit buswidth"
-	depends on MTD_CFI_GEOMETRY
+config MTD_MAP_BANK_WIDTH_4
+	bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
 	help
 	  If you wish to support CFI devices on a physical bus which is
 	  32 bits wide, say 'Y'.
 
-config MTD_CFI_B8
-	bool "Support 64-bit buswidth"
-	depends on MTD_CFI_GEOMETRY
+config MTD_MAP_BANK_WIDTH_8
+	bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
 	help
 	  If you wish to support CFI devices on a physical bus which is
 	  64 bits wide, say 'Y'.
 
+config MTD_MAP_BANK_WIDTH_16
+	bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  128 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_32
+	bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  256 bits wide, say 'Y'.
+
 config MTD_CFI_I1
-	bool "Support 1-chip flash interleave" if !MTD_CFI_B1
-	depends on MTD_CFI_GEOMETRY
-	default y if MTD_CFI_B1
+	bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
+	default y
 	help
 	  If your flash chips are not interleaved - i.e. you only have one
 	  flash chip addressed by each bus cycle, then say 'Y'.
 
 config MTD_CFI_I2
-	bool "Support 2-chip flash interleave"
-	depends on MTD_CFI_GEOMETRY
+	bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
+	default y
 	help
 	  If your flash chips are interleaved in pairs - i.e. you have two
 	  flash chips addressed by each bus cycle, then say 'Y'.
 
 config MTD_CFI_I4
-	bool "Support 4-chip flash interleave"
-	depends on MTD_CFI_GEOMETRY
+	bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
+	default n
 	help
 	  If your flash chips are interleaved in fours - i.e. you have four
 	  flash chips addressed by each bus cycle, then say 'Y'.
 
 config MTD_CFI_I8
-	bool "Support 8-chip flash interleave"
-	depends on MTD_CFI_GEOMETRY
+	bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
+	default n
 	help
 	  If your flash chips are interleaved in eights - i.e. you have eight
 	  flash chips addressed by each bus cycle, then say 'Y'.
@@ -160,6 +173,27 @@ config MTD_CFI_AMDSTD
 	  provides support for one of those command sets, used on chips 
 	  including the AMD Am29LV320.
 
+config MTD_CFI_AMDSTD_RETRY
+	int "Retry failed commands (erase/program)"
+	depends on MTD_CFI_AMDSTD
+	default "0"
+	help
+	  Some chips, when attached to a shared bus, don't properly filter
+	  bus traffic that is destined to other devices.  This broken
+	  behavior causes erase and program sequences to be aborted when
+	  the sequences are mixed with traffic for other devices.
+
+	  SST49LF040 (and related) chips are know to be broken.
+
+config MTD_CFI_AMDSTD_RETRY_MAX
+	int "Max retries of failed commands (erase/program)"
+	depends on MTD_CFI_AMDSTD_RETRY
+	default "0"
+	help
+	  If you have an SST49LF040 (or related chip) then this value should
+	  be set to at least 1.  This can also be adjusted at driver load
+	  time with the retry_cmd_max module parameter.
+
 config MTD_CFI_STAA
 	tristate "Support for ST (Advanced Architecture) flash chips"
 	depends on MTD_GEN_PROBE
@@ -168,6 +202,11 @@ config MTD_CFI_STAA
 	  sets which a CFI-compliant chip may claim to implement. This code
 	  provides support for one of those command sets.
 
+config MTD_CFI_UTIL
+	tristate
+	default y if MTD_CFI_INTELEXT=y || MTD_CFI_AMDSTD=y || MTD_CFI_STAA=y
+	default m if MTD_CFI_INTELEXT=m || MTD_CFI_AMDSTD=m || MTD_CFI_STAA=m
+
 config MTD_RAM
 	tristate "Support for RAM chips in bus mapping"
 	depends on MTD

drivers/mtd/chips/Makefile

 #
 # linux/drivers/chips/Makefile
 #
-# $Id: Makefile.common,v 1.1 2003/05/21 15:00:01 dwmw2 Exp $
+# $Id: Makefile.common,v 1.4 2004/07/12 16:07:30 dwmw2 Exp $
 
 #                       *** BIG UGLY NOTE ***
 #
 # The removal of get_module_symbol() and replacement with
 # inter_module_register() et al has introduced a link order dependency
 # here where previously there was none.  We now have to ensure that
-# the CFI command set drivers are linked before cfi_probe.o
+# the CFI command set drivers are linked before gen_probe.o
 
 obj-$(CONFIG_MTD)		+= chipreg.o
 obj-$(CONFIG_MTD_AMDSTD)	+= amd_flash.o 
 obj-$(CONFIG_MTD_CFI)		+= cfi_probe.o
+obj-$(CONFIG_MTD_CFI_UTIL)	+= cfi_util.o
 obj-$(CONFIG_MTD_CFI_STAA)	+= cfi_cmdset_0020.o
 obj-$(CONFIG_MTD_CFI_AMDSTD)	+= cfi_cmdset_0002.o
 obj-$(CONFIG_MTD_CFI_INTELEXT)	+= cfi_cmdset_0001.o

drivers/mtd/chips/amd_flash.c

@@ -3,7 +3,7 @@
  *
  * Author: Jonas Holmberg <jonas.holmberg@axis.com>
  *
- * $Id: amd_flash.c,v 1.23 2003/06/12 09:24:13 dwmw2 Exp $
+ * $Id: amd_flash.c,v 1.24 2004/07/12 13:34:30 dwmw2 Exp $
  *
  * Copyright (c) 2001 Axis Communications AB
  *

drivers/mtd/chips/cfi_probe.c

 /* 
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: cfi_probe.c,v 1.71 2003/05/28 12:51:48 dwmw2 Exp $
+   $Id: cfi_probe.c,v 1.77 2004/07/14 08:38:44 dwmw2 Exp $
 */
 
 #include <linux/config.h>
@@ -26,7 +26,7 @@ static void print_cfi_ident(struct cfi_ident *);
 #endif
 
 static int cfi_probe_chip(struct map_info *map, __u32 base,
-			  struct flchip *chips, struct cfi_private *cfi);
+			  unsigned long *chip_map, struct cfi_private *cfi);
 static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
 
 struct mtd_info *cfi_probe(struct map_info *map);
@@ -35,21 +35,36 @@ struct mtd_info *cfi_probe(struct map_info *map);
    in: interleave,type,mode
    ret: table index, <0 for error
  */
-static inline int qry_present(struct map_info *map, __u32 base,
+static int qry_present(struct map_info *map, __u32 base,
 				struct cfi_private *cfi)
 {
 	int osf = cfi->interleave * cfi->device_type;	// scale factor
+	map_word val;
+	map_word qry;
 
-	if (cfi_read(map,base+osf*0x10)==cfi_build_cmd('Q',map,cfi) &&
-	    cfi_read(map,base+osf*0x11)==cfi_build_cmd('R',map,cfi) &&
-	    cfi_read(map,base+osf*0x12)==cfi_build_cmd('Y',map,cfi))
-		return 1;	// ok !
+	qry =  cfi_build_cmd('Q', map, cfi);
+	val = map_read(map, base + osf*0x10);
 
-	return 0; 	// nothing found
+	if (!map_word_equal(map, qry, val))
+		return 0;
+
+	qry =  cfi_build_cmd('R', map, cfi);
+	val = map_read(map, base + osf*0x11);
+
+	if (!map_word_equal(map, qry, val))
+		return 0;
+
+	qry =  cfi_build_cmd('Y', map, cfi);
+	val = map_read(map, base + osf*0x12);
+
+	if (!map_word_equal(map, qry, val))
+		return 0;
+
+	return 1; 	// nothing found
 }
 
 static int cfi_probe_chip(struct map_info *map, __u32 base,
-			  struct flchip *chips, struct cfi_private *cfi)
+			  unsigned long *chip_map, struct cfi_private *cfi)
 {
 	int i;
 	
@@ -66,6 +81,7 @@ static int cfi_probe_chip(struct map_info *map, __u32 base,
 		return 0;
 	}
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
 
 	if (!qry_present(map,base,cfi))
@@ -78,18 +94,25 @@ static int cfi_probe_chip(struct map_info *map, __u32 base,
 	}
 
 	/* Check each previous chip to see if it's an alias */
-	for (i=0; i<cfi->numchips; i++) {
+ 	for (i=0; i < (base >> cfi->chipshift); i++) {
+ 		unsigned long start;
+ 		if(!test_bit(i, chip_map)) {
+			/* Skip location; no valid chip at this address */
+ 			continue; 
+ 		}
+ 		start = i << cfi->chipshift;
 		/* This chip should be in read mode if it's one
 		   we've already touched. */
-		if (qry_present(map,chips[i].start,cfi)) {
+		if (qry_present(map, start, cfi)) {
 			/* Eep. This chip also had the QRY marker. 
 			 * Is it an alias for the new one? */
-			cfi_send_gen_cmd(0xF0, 0, chips[i].start, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
 
 			/* If the QRY marker goes away, it's an alias */
-			if (!qry_present(map, chips[i].start, cfi)) {
+			if (!qry_present(map, start, cfi)) {
 				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
-				       map->name, base, chips[i].start);
+				       map->name, base, start);
 				return 0;
 			}
 			/* Yes, it's actually got QRY for data. Most 
@@ -97,10 +120,11 @@ static int cfi_probe_chip(struct map_info *map, __u32 base,
 			 * too and if it's the same, assume it's an alias. */
 			/* FIXME: Use other modes to do a proper check */
 			cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
 			
 			if (qry_present(map, base, cfi)) {
 				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
-				       map->name, base, chips[i].start);
+				       map->name, base, start);
 				return 0;
 			}
 		}
@@ -108,21 +132,16 @@ static int cfi_probe_chip(struct map_info *map, __u32 base,
 	
 	/* OK, if we got to here, then none of the previous chips appear to
 	   be aliases for the current one. */
-	if (cfi->numchips == MAX_CFI_CHIPS) {
-		printk(KERN_WARNING"%s: Too many flash chips detected. Increase MAX_CFI_CHIPS from %d.\n", map->name, MAX_CFI_CHIPS);
-		/* Doesn't matter about resetting it to Read Mode - we're not going to talk to it anyway */
-		return -1;
-	}
-	chips[cfi->numchips].start = base;
-	chips[cfi->numchips].state = FL_READY;
+	set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
 	cfi->numchips++;
 	
 	/* Put it back into Read Mode */
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
 
-	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit mode\n",
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
 	       map->name, cfi->interleave, cfi->device_type*8, base,
-	       map->buswidth*8);
+	       map->bankwidth*8);
 	
 	return 1;
 }
@@ -150,7 +169,6 @@ static int cfi_chip_setup(struct map_info *map,
 	memset(cfi->cfiq,0,sizeof(struct cfi_ident));	
 	
 	cfi->cfi_mode = CFI_MODE_CFI;
-	cfi->fast_prog=1;		/* CFI supports fast programming */
 	
 	/* Read the CFI info structure */
 	for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++) {
@@ -180,8 +198,29 @@ static int cfi_chip_setup(struct map_info *map,
 		       (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
 #endif
 	}
+
+	/* Note we put the device back into Read Mode BEFORE going into Auto
+	 * Select Mode, as some devices support nesting of modes, others
+	 * don't. This way should always work.
+	 * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
+	 * so should be treated as nops or illegal (and so put the device
+	 * back into Read Mode, which is a nop in this case).
+	 */
+	cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi->mfr = cfi_read_query(map, base);
+	cfi->id = cfi_read_query(map, base + ofs_factor);    
+
 	/* Put it back into Read Mode */
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	/* ... even if it's an Intel chip */
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	       map->name, cfi->interleave, cfi->device_type*8, base,
+	       map->bankwidth*8);
 
 	return 1;
 }
@@ -241,11 +280,11 @@ static void print_cfi_ident(struct cfi_ident *cfip)
 		printk("No Alternate Algorithm Table\n");
 		
 		
-	printk("Vcc Minimum: %x.%x V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
-	printk("Vcc Maximum: %x.%x V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
+	printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
+	printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
 	if (cfip->VppMin) {
-		printk("Vpp Minimum: %x.%x V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
-		printk("Vpp Maximum: %x.%x V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
+		printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
+		printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
 	}
 	else
 		printk("No Vpp line\n");

drivers/mtd/chips/cfi_util.c

+/*
+ * Common Flash Interface support:
+ *   Generic utility functions not dependant on command set
+ *
+ * Copyright (C) 2002 Red Hat
+ * Copyright (C) 2003 STMicroelectronics Limited
+ *
+ * This code is covered by the GPL.
+ *
+ * $Id: cfi_util.c,v 1.4 2004/07/14 08:38:44 dwmw2 Exp $
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/compatmac.h>
+
+struct cfi_extquery *
+cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	__u32 base = 0; // cfi->chips[0].start;
+	int ofs_factor = cfi->interleave * cfi->device_type;
+	int i;
+	struct cfi_extquery *extp = NULL;
+
+	printk(" %s Extended Query Table at 0x%4.4X\n", name, adr);
+	if (!adr)
+		goto out;
+
+	/* Switch it into Query Mode */
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+
+	extp = kmalloc(size, GFP_KERNEL);
+	if (!extp) {
+		printk(KERN_ERR "Failed to allocate memory\n");
+		goto out;
+	}
+		
+	/* Read in the Extended Query Table */
+	for (i=0; i<size; i++) {
+		((unsigned char *)extp)[i] = 
+			cfi_read_query(map, base+((adr+i)*ofs_factor));
+	}
+
+	if (extp->MajorVersion != '1' || 
+	    (extp->MinorVersion < '0' || extp->MinorVersion > '3')) {
+		printk(KERN_WARNING "  Unknown %s Extended Query "
+		       "version %c.%c.\n",  name, extp->MajorVersion,
+		       extp->MinorVersion);
+		kfree(extp);
+		extp = NULL;
+		goto out;
+	}
+
+out:
+	/* Make sure it's in read mode */
+	cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xff, 0, base, map, cfi, cfi->device_type, NULL);
+
+	return extp;
+}
+
+EXPORT_SYMBOL(cfi_read_pri);
+
+void cfi_fixup(struct map_info *map, struct cfi_fixup* fixups)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_fixup *f;
+
+	for (f=fixups; f->fixup; f++) {
+		if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
+		    ((f->id  == CFI_ID_ANY)  || (f->id  == cfi->id))) {
+			f->fixup(map, f->param);
+		}
+	}
+}
+
+EXPORT_SYMBOL(cfi_fixup);
+
+MODULE_LICENSE("GPL");

drivers/mtd/chips/chipreg.c

 /*
- * $Id: chipreg.c,v 1.15 2003/05/21 15:15:05 dwmw2 Exp $
+ * $Id: chipreg.c,v 1.16 2003/05/29 09:36:15 dwmw2 Exp $
  *
  * Registration for chip drivers
  *

drivers/mtd/chips/gen_probe.c

@@ -2,7 +2,7 @@
  * Routines common to all CFI-type probes.
  * (C) 2001-2003 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.c,v 1.13 2003/06/25 11:50:37 dwmw2 Exp $
+ * $Id: gen_probe.c,v 1.19 2004/07/13 22:33:32 dwmw2 Exp $
  */
 
 #include <linux/kernel.h>
@@ -50,16 +50,15 @@ struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp)
 EXPORT_SYMBOL(mtd_do_chip_probe);
 
 
-struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp)
+static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp)
 {
-	unsigned long base=0;
 	struct cfi_private cfi;
 	struct cfi_private *retcfi;
-	struct flchip chip[MAX_CFI_CHIPS];
-	int i;
+	unsigned long *chip_map;
+	int i, j, mapsize;
+	int max_chips;
 
 	memset(&cfi, 0, sizeof(cfi));
-	memset(&chip[0], 0, sizeof(chip));
 
 	/* Call the probetype-specific code with all permutations of 
 	   interleave and device type, etc. */
@@ -80,46 +79,47 @@ struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe
 		return NULL;
 	}
 #endif
-	chip[0].start = 0;
-	chip[0].state = FL_READY;
 	cfi.chipshift = cfi.cfiq->DevSize;
 
-	switch(cfi.interleave) {
-#ifdef CFIDEV_INTERLEAVE_1
-	case 1:
-		break;
-#endif
-#ifdef CFIDEV_INTERLEAVE_2
-	case 2:
+	if (cfi_interleave_is_1(&cfi)) {
+		;
+	} else if (cfi_interleave_is_2(&cfi)) {
 		cfi.chipshift++;
-		break;
-#endif
-#ifdef CFIDEV_INTERLEAVE_4
-	case 4:
-		cfi.chipshift+=2;
-		break;
-#endif
-	default:
+	} else if (cfi_interleave_is_4((&cfi))) {
+		cfi.chipshift += 2;
+	} else if (cfi_interleave_is_8(&cfi)) {
+		cfi.chipshift += 3;
+	} else {
 		BUG();
 	}
 		
 	cfi.numchips = 1;
 
+	/* 
+	 * Allocate memory for bitmap of valid chips. 
+	 * Align bitmap storage size to full byte. 
+	 */ 
+	max_chips = map->size >> cfi.chipshift;
+	mapsize = (max_chips / 8) + ((max_chips % 8) ? 1 : 0);
+	chip_map = kmalloc(mapsize, GFP_KERNEL);
+	if (!chip_map) {
+		printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
+		kfree(cfi.cfiq);
+		return NULL;
+	}
+	memset (chip_map, 0, mapsize);
+
+	set_bit(0, chip_map); /* Mark first chip valid */
+
 	/*
 	 * Now probe for other chips, checking sensibly for aliases while
 	 * we're at it. The new_chip probe above should have let the first
 	 * chip in read mode.
-	 *
-	 * NOTE: Here, we're checking if there is room for another chip
-	 *       the same size within the mapping. Therefore, 
-	 *       base + chipsize <= map->size is the correct thing to do, 
-	 *       because, base + chipsize would be the  _first_ byte of the
-	 *       next chip, not the one we're currently pondering.
 	 */
 
-	for (base = (1<<cfi.chipshift); base + (1<<cfi.chipshift) <= map->size;
-	     base += (1<<cfi.chipshift))
-		cp->probe_chip(map, base, &chip[0], &cfi);
+	for (i = 1; i < max_chips; i++) {
+		cp->probe_chip(map, i << cfi.chipshift, chip_map, &cfi);
+	}
 
 	/*
 	 * Now allocate the space for the structures we need to return to 
@@ -131,19 +131,26 @@ struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe
 	if (!retcfi) {
 		printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name);
 		kfree(cfi.cfiq);
+		kfree(chip_map);
 		return NULL;
 	}
 
 	memcpy(retcfi, &cfi, sizeof(cfi));
-	memcpy(&retcfi->chips[0], chip, sizeof(struct flchip) * cfi.numchips);
-
-	/* Fix up the stuff that breaks when you move it */
-	for (i=0; i< retcfi->numchips; i++) {
-		init_waitqueue_head(&retcfi->chips[i].wq);
-		spin_lock_init(&retcfi->chips[i]._spinlock);
-		retcfi->chips[i].mutex = &retcfi->chips[i]._spinlock;
+	memset(&retcfi->chips[0], 0, sizeof(struct flchip) * cfi.numchips);
+
+	for (i = 0, j = 0; (j < cfi.numchips) && (i < max_chips); i++) {
+		if(test_bit(i, chip_map)) {
+			struct flchip *pchip = &retcfi->chips[j++];
+
+			pchip->start = (i << cfi.chipshift);
+			pchip->state = FL_READY;
+			init_waitqueue_head(&pchip->wq);
+			spin_lock_init(&pchip->_spinlock);
+			pchip->mutex = &pchip->_spinlock;
+		}
 	}
 
+	kfree(chip_map);
 	return retcfi;
 }
 
@@ -151,131 +158,27 @@ struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe
 static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp,
 			     struct cfi_private *cfi)
 {
-	switch (map->buswidth) {
-#ifdef CFIDEV_BUSWIDTH_1		
-	case CFIDEV_BUSWIDTH_1:
-		cfi->interleave = CFIDEV_INTERLEAVE_1;
-
-		cfi->device_type = CFI_DEVICETYPE_X8;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-		break;			
-#endif /* CFIDEV_BUSWITDH_1 */
-
-#ifdef CFIDEV_BUSWIDTH_2		
-	case CFIDEV_BUSWIDTH_2:
-#ifdef CFIDEV_INTERLEAVE_1
-		cfi->interleave = CFIDEV_INTERLEAVE_1;
-
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_1 */
-#ifdef CFIDEV_INTERLEAVE_2
-		cfi->interleave = CFIDEV_INTERLEAVE_2;
-
-		cfi->device_type = CFI_DEVICETYPE_X8;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_2 */
-		break;			
-#endif /* CFIDEV_BUSWIDTH_2 */
-
-#ifdef CFIDEV_BUSWIDTH_4
-	case CFIDEV_BUSWIDTH_4:
-#if defined(CFIDEV_INTERLEAVE_1) && defined(SOMEONE_ACTUALLY_MAKES_THESE)
-                cfi->interleave = CFIDEV_INTERLEAVE_1;
-
-                cfi->device_type = CFI_DEVICETYPE_X32;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_1 */
-#ifdef CFIDEV_INTERLEAVE_2
-		cfi->interleave = CFIDEV_INTERLEAVE_2;
-
-#ifdef SOMEONE_ACTUALLY_MAKES_THESE
-		cfi->device_type = CFI_DEVICETYPE_X32;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-
-		cfi->device_type = CFI_DEVICETYPE_X8;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_2 */
-#ifdef CFIDEV_INTERLEAVE_4
-		cfi->interleave = CFIDEV_INTERLEAVE_4;
-
-#ifdef SOMEONE_ACTUALLY_MAKES_THESE
-		cfi->device_type = CFI_DEVICETYPE_X32;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-
-		cfi->device_type = CFI_DEVICETYPE_X8;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_4 */
-		break;
-#endif /* CFIDEV_BUSWIDTH_4 */
-
-#ifdef CFIDEV_BUSWIDTH_8
-	case CFIDEV_BUSWIDTH_8:
-#if defined(CFIDEV_INTERLEAVE_2) && defined(SOMEONE_ACTUALLY_MAKES_THESE)
-                cfi->interleave = CFIDEV_INTERLEAVE_2;
-
-                cfi->device_type = CFI_DEVICETYPE_X32;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_2 */
-#ifdef CFIDEV_INTERLEAVE_4
-		cfi->interleave = CFIDEV_INTERLEAVE_4;
-
-#ifdef SOMEONE_ACTUALLY_MAKES_THESE
-		cfi->device_type = CFI_DEVICETYPE_X32;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_4 */
-#ifdef CFIDEV_INTERLEAVE_8
-		cfi->interleave = CFIDEV_INTERLEAVE_8;
-
-		cfi->device_type = CFI_DEVICETYPE_X16;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-
-		cfi->device_type = CFI_DEVICETYPE_X8;
-		if (cp->probe_chip(map, 0, NULL, cfi))
-			return 1;
-#endif /* CFIDEV_INTERLEAVE_8 */
-		break;
-#endif /* CFIDEV_BUSWIDTH_8 */
-
-	default:
-		printk(KERN_WARNING "genprobe_new_chip called with unsupported buswidth %d\n", map->buswidth);
-		return 0;
+	int min_chips = (map_bankwidth(map)/4?:1); /* At most 4-bytes wide. */
+	int max_chips = map_bankwidth(map); /* And minimum 1 */
+	int nr_chips, type;
+
+	for (nr_chips = min_chips; nr_chips <= max_chips; nr_chips <<= 1) {
+
+		if (!cfi_interleave_supported(nr_chips))
+		    continue;
+
+		cfi->interleave = nr_chips;
+
+		for (type = 0; type < 3; type++) {
+			cfi->device_type = 1<<type;
+
+			if (cp->probe_chip(map, 0, NULL, cfi))
+				return 1;
+		}
 	}
 	return 0;
 }
 
-
 typedef struct mtd_info *cfi_cmdset_fn_t(struct map_info *, int);
 
 extern cfi_cmdset_fn_t cfi_cmdset_0001;

drivers/mtd/chips/jedec.c

@@ -11,7 +11,7 @@
  * not going to guess how to send commands to them, plus I expect they will
  * all speak CFI..
  *
- * $Id: jedec.c,v 1.19 2003/05/29 09:25:23 dwmw2 Exp $
+ * $Id: jedec.c,v 1.20 2004/07/12 14:03:01 dwmw2 Exp $
  */
 
 #include <linux/init.h>

drivers/mtd/chips/map_ram.c

 /*
  * Common code to handle map devices which are simple RAM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_ram.c,v 1.17 2003/05/28 12:51:49 dwmw2 Exp $
+ * $Id: map_ram.c,v 1.19 2004/07/12 21:58:44 dwmw2 Exp $
  */
 
 #include <linux/module.h>
@@ -104,10 +104,15 @@ static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr)
 	/* Yeah, it's inefficient. Who cares? It's faster than a _real_
 	   flash erase. */
 	struct map_info *map = (struct map_info *)mtd->priv;
+	map_word allff;
 	unsigned long i;
 
-	for (i=0; i<instr->len; i++)
-		map_write8(map, 0xFF, instr->addr + i);
+	allff = map_word_ff(map);
+
+	for (i=0; i<instr->len; i += map_bankwidth(map))
+		map_write(map, allff, instr->addr + i);
+
+	instr->state = MTD_ERASE_DONE;
 
 	if (instr->callback)
 		instr->callback(instr);

drivers/mtd/chips/map_rom.c

 /*
  * Common code to handle map devices which are simple ROM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_rom.c,v 1.20 2003/05/28 12:51:49 dwmw2 Exp $
+ * $Id: map_rom.c,v 1.21 2004/07/12 14:06:01 dwmw2 Exp $
  */
 
 #include <linux/module.h>

drivers/mtd/chips/sharp.c

@@ -4,7 +4,7 @@
  * Copyright 2000,2001 David A. Schleef <ds@schleef.org>
  *           2000,2001 Lineo, Inc.
  *
- * $Id: sharp.c,v 1.12 2003/05/28 15:39:52 dwmw2 Exp $
+ * $Id: sharp.c,v 1.13 2004/07/12 14:06:34 dwmw2 Exp $
  *
  * Devices supported:
  *   LH28F016SCT Symmetrical block flash memory, 2Mx8

drivers/mtd/maps/Kconfig

 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.12 2003/06/23 07:38:11 dwmw2 Exp $
+# $Id: Kconfig,v 1.29 2004/07/15 15:29:17 dwmw2 Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
@@ -151,11 +151,11 @@ config MTD_AMD76XROM
 
 	  BE VERY CAREFUL.
 
-config MTD_ICH2ROM
-	tristate "BIOS flash chip on Intel Hub Controller 2"
+config MTD_ICHXROM
+	tristate "BIOS flash chip on Intel Controller Hub 2/3/4/5"
 	depends on X86 && MTD_JEDECPROBE && MTD_COMPLEX_MAPPINGS
 	help
-	  Support for treating the BIOS flash chip on ICH2 motherboards
+	  Support for treating the BIOS flash chip on ICHX motherboards
 	  as an MTD device - with this you can reprogram your BIOS.
 
 	  BE VERY CAREFUL.
@@ -177,7 +177,7 @@ config MTD_TSUNAMI
 
 config MTD_LASAT
 	tristate "Flash chips on LASAT board"
-	depends on LASAT && MTD_CFI
+	depends on LASAT
 	help
 	  Support for the flash chips on the Lasat 100 and 200 boards.
 
@@ -210,6 +210,52 @@ config MTD_PB1XXX_USER
 	  You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use
 	  both banks.
 
+config MTD_PB1550
+	tristate "Flash devices on Alchemy PB1550 board"
+	depends on MIPS && MIPS_PB1550
+	help
+	  Flash memory access on Alchemy Pb1550 board
+
+config MTD_PB1550_BOOT
+	bool "PB1550 boot flash device"
+	depends on MTD_PB1550
+	help
+	  Use the first of the two 64MiB flash banks on Pb1550 board.
+	  You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use
+	  both banks.
+
+config MTD_PB1550_USER
+	bool "PB1550 user flash device"
+	depends on MTD_PB1550
+	default y if MTD_PB1550_BOOT = n
+	help
+	  Use the second of the two 64MiB flash banks on Pb1550 board.
+	  You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use
+	  both banks.
+
+config MTD_DB1550
+	tristate "Flash devices on Alchemy DB1550 board"
+	depends on MIPS && MIPS_DB1550
+	help
+	  Flash memory access on Alchemy Db1550 board
+
+config MTD_DB1550_BOOT
+	bool "DB1550 boot flash device"
+	depends on MTD_DB1550
+	help
+	  Use the first of the two 64MiB flash banks on Db1550 board.
+	  You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use
+	  both banks.
+
+config MTD_DB1550_USER
+	bool "DB1550 user flash device"
+	depends on MTD_DB1550
+	default y if MTD_DB1550_BOOT = n
+	help
+	  Use the second of the two 64MiB flash banks on Db1550 board.
+	  You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use
+	  both banks.
+
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
@@ -235,6 +281,13 @@ config MTD_L440GX
 
 	  BE VERY CAREFUL.
 
+config MTD_SBC8240
+	tristate "Flash device on SBC8240"
+	depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260
+	help
+          Flash access on the SBC8240 board from Wind River.  See
+          <http://www.windriver.com/products/sbc8240/>
+
 config MTD_TQM8XXL
 	tristate "CFI Flash device mapped on TQM8XXL"
 	depends on MTD_CFI && PPC32 && 8xx && TQM8xxL
@@ -265,7 +318,7 @@ config MTD_MBX860
 
 config MTD_DBOX2
 	tristate "CFI Flash device mapped on D-Box2"
-	depends on PPC32 && 8xx && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
+	depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
 	help
 	  This enables access routines for the flash chips on the Nokia/Sagem
 	  D-Box 2 board. If you have one of these boards and would like to use
@@ -457,6 +510,13 @@ config MTD_CEIVA
 	  PhotoMax Digital Picture Frame.
 	  If you have such a device, say 'Y'.
 
+config MTD_NOR_TOTO
+	tristate "NOR Flash device on TOTO board"
+	depends on ARM && ARCH_OMAP && OMAP_TOTO
+	help
+	  This enables access to the NOR flash on the Texas Instruments
+	  TOTO board.
+
 config MTD_H720X
 	tristate "Hynix evaluation board mappings"
 	depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
@@ -464,6 +524,13 @@ config MTD_H720X
 	  This enables access to the flash chips on the Hynix evaluation boards.
 	  If you have such a board, say 'Y'.
 
+config MTD_MPC1211
+	tristate "CFI Flash device mapped on Interface MPC-1211"
+	depends on SUPERH && SH_MPC1211 && MTD_CFI
+	help
+	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
+	  If you have such a board, say 'Y'.
+
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
 	tristate "PCI MTD driver"
@@ -491,11 +558,26 @@ config MTD_UCLINUX
 
 config MTD_WRSBC8260
 	tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
-	depends on MTD_PARTITIONS && SBC82xx
+	depends on (SBC82xx || SBC8560)
+	select MTD_PARTITIONS
+	select MTD_MAP_BANK_WIDTH_4
+	select MTD_MAP_BANK_WIDTH_1
+	select MTD_CFI_I1
+	select MTD_CFI_I4
 	help
 	  Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
 	  all three flash regions on CS0, CS1 and CS6 if they are configured
 	  correctly by the boot loader.
 
+config MTD_DMV182
+        tristate "Map driver for Dy-4 SVME/DMV-182 board."
+        depends on DMV182
+        select MTD_PARTITIONS
+	select MTD_MAP_BANK_WIDTH_32
+	select MTD_CFI_I8
+	select MTD_CFI_AMDSTD
+        help
+          Map driver for Dy-4 SVME/DMV-182 board.
+
 endmenu
 

drivers/mtd/maps/Makefile

 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.2 2003/05/28 10:48:41 dwmw2 Exp $
+# $Id: Makefile.common,v 1.14 2004/07/12 16:07:31 dwmw2 Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
@@ -19,7 +19,7 @@ obj-$(CONFIG_MTD_EPXA10DB)	+= epxa10db-flash.o
 obj-$(CONFIG_MTD_IQ80310)	+= iq80310.o
 obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
 obj-$(CONFIG_MTD_AMD76XROM)	+= amd76xrom.o
-obj-$(CONFIG_MTD_ICH2ROM)	+= ich2rom.o
+obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_LUBBOCK)	+= lubbock-flash.o
 obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
@@ -42,6 +42,9 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
 obj-$(CONFIG_MTD_PB1XXX)	+= pb1xxx-flash.o
+obj-$(CONFIG_MTD_DB1X00)        += db1x00-flash.o
+obj-$(CONFIG_MTD_PB1550)        += pb1550-flash.o
+obj-$(CONFIG_MTD_DB1550)        += db1550-flash.o
 obj-$(CONFIG_MTD_LASAT)		+= lasat.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
@@ -55,5 +58,9 @@ obj-$(CONFIG_MTD_EBONY)		+= ebony.o
 obj-$(CONFIG_MTD_BEECH)		+= beech-mtd.o
 obj-$(CONFIG_MTD_ARCTIC)	+= arctic-mtd.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
+obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
+obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
+obj-$(CONFIG_MTD_MPC1211)	+= mpc1211.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
+obj-$(CONFIG_MTD_DMV182)	+= dmv182.o

drivers/mtd/maps/arctic-mtd.c

 /*
- * $Id: arctic-mtd.c,v 1.10 2003/06/02 16:37:59 trini Exp $
+ * $Id: arctic-mtd.c,v 1.11 2004/07/12 21:59:43 dwmw2 Exp $
  * 
  * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for 
  *                              IBM 405LP Arctic boards.
@@ -72,7 +72,7 @@
 static struct map_info arctic_mtd_map = {
 	.name		= NAME,
 	.size		= SIZE,
-	.buswidth	= BUSWIDTH,
+	.bankwidth	= BUSWIDTH,
 	.phys		= PADDR,
 };
 

drivers/mtd/maps/autcpu12-nvram.c

@@ -2,7 +2,7 @@
  * NV-RAM memory access on autcpu12 
  * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: autcpu12-nvram.c,v 1.5 2003/05/21 12:45:18 dwmw2 Exp $ 
+ * $Id: autcpu12-nvram.c,v 1.6 2004/07/12 21:59:43 dwmw2 Exp $ 
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -39,7 +39,7 @@ static struct mtd_info *sram_mtd;
 struct map_info autcpu12_sram_map = {
 	.name = "SRAM",
 	.size = 32768,
-	.buswidth = 4,
+	.bankwidth = 4,
 	.phys = 0x12000000,
 };
 

drivers/mtd/maps/beech-mtd.c

 /*
- * $Id: beech-mtd.c,v 1.7 2003/05/21 12:45:18 dwmw2 Exp $
+ * $Id: beech-mtd.c,v 1.8 2004/07/12 21:59:43 dwmw2 Exp $
  * 
  * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for 
  *                              IBM 405LP Beech boards.
@@ -51,7 +51,7 @@
 static struct map_info beech_mtd_map = {
 	.name =		NAME,
 	.size =		SIZE,
-	.buswidth =	BUSWIDTH,
+	.bankwidth =	BUSWIDTH,
 	.phys =		PADDR
 };
 

drivers/mtd/maps/ceiva.c

@@ -11,7 +11,7 @@
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
- * $Id: ceiva.c,v 1.8 2003/05/21 12:45:18 dwmw2 Exp $
+ * $Id: ceiva.c,v 1.10 2004/07/12 21:59:43 dwmw2 Exp $
  */
 
 #include <linux/config.h>
@@ -151,7 +151,7 @@ static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info
 		}
 
 		clps[i].map->virt = (unsigned long)clps[i].vbase;
-		clps[i].map->buswidth = clps[i].width;
+		clps[i].map->bankwidth = clps[i].width;
 		clps[i].map->size = clps[i].size;
 
 		simple_map_init(&clps[i].map);