Commit 68094b4b authored by Bjorn Helgaas's avatar Bjorn Helgaas

Merge branch 'pci/host-iproc' into next

* pci/host-iproc:
  PCI: Add Broadcom Northstar2 PAXC quirk for device class and MPSS
  PCI: iproc: Configure PCIe MPS settings
  PCI: iproc: Use of_device_get_match_data() to simplify probe
parents e34e38bf ce709f86
......@@ -47,7 +47,6 @@ MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *of_id;
struct iproc_pcie *pcie;
struct device_node *np = dev->of_node;
struct resource reg;
......@@ -55,16 +54,12 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
LIST_HEAD(res);
int ret;
of_id = of_match_device(iproc_pcie_of_match_table, dev);
if (!of_id)
return -EINVAL;
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
return -ENOMEM;
pcie->dev = dev;
pcie->type = (enum iproc_pcie_type)of_id->data;
pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev);
ret = of_address_to_resource(np, 0, &reg);
if (ret < 0) {
......
......@@ -1205,7 +1205,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
struct device *dev;
int ret;
void *sysdata;
struct pci_bus *bus;
struct pci_bus *bus, *child;
dev = pcie->dev;
......@@ -1278,6 +1278,9 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
if (pcie->map_irq)
pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
return 0;
......
......@@ -2240,6 +2240,27 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
PCI_DEVICE_ID_TIGON3_5719,
quirk_brcm_5719_limit_mrrs);
#ifdef CONFIG_PCIE_IPROC_PLATFORM
static void quirk_paxc_bridge(struct pci_dev *pdev)
{
/* The PCI config space is shared with the PAXC root port and the first
* Ethernet device. So, we need to workaround this by telling the PCI
* code that the bridge is not an Ethernet device.
*/
if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
/* MPSS is not being set properly (as it is currently 0). This is
* because that area of the PCI config space is hard coded to zero, and
* is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS)
* so that the MPS can be set to the real max value.
*/
pdev->pcie_mpss = 2;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
#endif
/* Originally in EDAC sources for i82875P:
* Intel tells BIOS developers to hide device 6 which
* configures the overflow device access containing
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment