Commit 68b14134 authored by Mark Brown's avatar Mark Brown Committed by Greg Kroah-Hartman

usb: misc: usb3503: Convert to regmap

This will give access to the diagnostic infrastructure regmap has but
the main point is to support future refactoring.
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 8e7245b8
......@@ -246,5 +246,6 @@ config USB_EZUSB_FX2
config USB_HSIC_USB3503
tristate "USB3503 HSIC to USB20 Driver"
depends on I2C
select REGMAP
help
This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
......@@ -26,6 +26,7 @@
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb3503.h>
#include <linux/regmap.h>
#define USB3503_VIDL 0x00
#define USB3503_VIDM 0x01
......@@ -50,56 +51,18 @@
#define USB3503_CFGP 0xee
#define USB3503_CLKSUSP (1 << 7)
#define USB3503_RESET 0xff
struct usb3503 {
enum usb3503_mode mode;
struct i2c_client *client;
struct regmap *regmap;
struct device *dev;
u8 port_off_mask;
int gpio_intn;
int gpio_reset;
int gpio_connect;
};
static int usb3503_write_register(struct i2c_client *client,
char reg, char data)
{
return i2c_smbus_write_byte_data(client, reg, data);
}
static int usb3503_read_register(struct i2c_client *client, char reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
{
int err;
err = usb3503_read_register(client, reg);
if (err < 0)
return err;
err = usb3503_write_register(client, reg, err | req);
if (err < 0)
return err;
return 0;
}
static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
{
int err;
err = usb3503_read_register(client, reg);
if (err < 0)
return err;
err = usb3503_write_register(client, reg, err & ~req);
if (err < 0)
return err;
return 0;
}
static int usb3503_reset(struct usb3503 *hub, int state)
{
if (!state && gpio_is_valid(hub->gpio_connect))
......@@ -117,7 +80,7 @@ static int usb3503_reset(struct usb3503 *hub, int state)
static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
{
struct i2c_client *i2c = hub->client;
struct device *dev = hub->dev;
int err = 0;
switch (mode) {
......@@ -125,37 +88,40 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
usb3503_reset(hub, 1);
/* SP_ILOCK: set connect_n, config_n for config */
err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
(USB3503_SPILOCK_CONNECT
| USB3503_SPILOCK_CONFIG));
if (err < 0) {
dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
dev_err(dev, "SP_ILOCK failed (%d)\n", err);
goto err_hubmode;
}
/* PDS : Disable For Self Powered Operation */
if (hub->port_off_mask) {
err = usb3503_set_bits(i2c, USB3503_PDS,
err = regmap_update_bits(hub->regmap, USB3503_PDS,
hub->port_off_mask,
hub->port_off_mask);
if (err < 0) {
dev_err(&i2c->dev, "PDS failed (%d)\n", err);
dev_err(dev, "PDS failed (%d)\n", err);
goto err_hubmode;
}
}
/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
err = regmap_update_bits(hub->regmap, USB3503_CFG1,
USB3503_SELF_BUS_PWR,
USB3503_SELF_BUS_PWR);
if (err < 0) {
dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
dev_err(dev, "CFG1 failed (%d)\n", err);
goto err_hubmode;
}
/* SP_LOCK: clear connect_n, config_n for hub connect */
err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
(USB3503_SPILOCK_CONNECT
| USB3503_SPILOCK_CONFIG));
err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
(USB3503_SPILOCK_CONNECT
| USB3503_SPILOCK_CONFIG), 0);
if (err < 0) {
dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
dev_err(dev, "SP_ILOCK failed (%d)\n", err);
goto err_hubmode;
}
......@@ -163,18 +129,18 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
gpio_set_value_cansleep(hub->gpio_connect, 1);
hub->mode = mode;
dev_info(&i2c->dev, "switched to HUB mode\n");
dev_info(dev, "switched to HUB mode\n");
break;
case USB3503_MODE_STANDBY:
usb3503_reset(hub, 0);
hub->mode = mode;
dev_info(&i2c->dev, "switched to STANDBY mode\n");
dev_info(dev, "switched to STANDBY mode\n");
break;
default:
dev_err(&i2c->dev, "unknown mode is request\n");
dev_err(dev, "unknown mode is request\n");
err = -EINVAL;
break;
}
......@@ -183,6 +149,13 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
return err;
}
static const struct regmap_config usb3503_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = USB3503_RESET,
};
static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
struct usb3503_platform_data *pdata = dev_get_platdata(&i2c->dev);
......@@ -200,7 +173,13 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
}
i2c_set_clientdata(i2c, hub);
hub->client = i2c;
hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
if (IS_ERR(hub->regmap)) {
err = PTR_ERR(hub->regmap);
dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
return err;
}
hub->dev = &i2c->dev;
if (pdata) {
hub->port_off_mask = pdata->port_off_mask;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment