thunderbolt: Update Kconfig entries to USB4

Since the driver now supports USB4 which is the standard going forward,
update the Kconfig entry to mention this and rename the entry from
CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the
correct option if they want to enable USB4.

Also do the same for Thunderbolt network driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/Makefile

@@ -171,7 +171,7 @@ obj-$(CONFIG_POWERCAP)		+= powercap/
 obj-$(CONFIG_MCB)		+= mcb/
 obj-$(CONFIG_PERF_EVENTS)	+= perf/
 obj-$(CONFIG_RAS)		+= ras/
-obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/
+obj-$(CONFIG_USB4)		+= thunderbolt/
 obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
 obj-y				+= hwtracing/intel_th/
 obj-$(CONFIG_STM)		+= hwtracing/stm/

drivers/net/Kconfig

@@ -489,12 +489,12 @@ config FUJITSU_ES
 	  This driver provides support for Extended Socket network device
 	  on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series.
 
-config THUNDERBOLT_NET
-	tristate "Networking over Thunderbolt cable"
-	depends on THUNDERBOLT && INET
+config USB4_NET
+	tristate "Networking over USB4 and Thunderbolt cables"
+	depends on USB4 && INET
 	help
-	  Select this if you want to create network between two
-	  computers over a Thunderbolt cable. The driver supports Apple
+	  Select this if you want to create network between two computers
+	  over a USB4 and Thunderbolt cables. The driver supports Apple
 	  ThunderboltIP protocol and allows communication with any host
 	  supporting the same protocol including Windows and macOS.
 

drivers/net/Makefile

@@ -76,6 +76,6 @@ obj-$(CONFIG_NTB_NETDEV) += ntb_netdev.o
 obj-$(CONFIG_FUJITSU_ES) += fjes/
 
 thunderbolt-net-y += thunderbolt.o
-obj-$(CONFIG_THUNDERBOLT_NET) += thunderbolt-net.o
+obj-$(CONFIG_USB4_NET) += thunderbolt-net.o
 obj-$(CONFIG_NETDEVSIM) += netdevsim/
 obj-$(CONFIG_NET_FAILOVER) += net_failover.o

drivers/thunderbolt/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
-menuconfig THUNDERBOLT
-	tristate "Thunderbolt support"
+menuconfig USB4
+	tristate "Unified support for USB4 and Thunderbolt"
 	depends on PCI
 	depends on X86 || COMPILE_TEST
 	select APPLE_PROPERTIES if EFI_STUB && X86
@@ -9,9 +9,10 @@ menuconfig THUNDERBOLT
 	select CRYPTO_HASH
 	select NVMEM
 	help
-	  Thunderbolt Controller driver. This driver is required if you
-	  want to hotplug Thunderbolt devices on Apple hardware or on PCs
-	  with Intel Falcon Ridge or newer.
+	  USB4 and Thunderbolt driver. USB4 is the public speficiation
+	  based on Thunderbolt 3 protocol. This driver is required if
+	  you want to hotplug Thunderbolt and USB4 compliant devices on
+	  Apple hardware or on PCs with Intel Falcon Ridge or newer.
 
 	  To compile this driver a module, choose M here. The module will be
 	  called thunderbolt.

drivers/thunderbolt/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
-obj-${CONFIG_THUNDERBOLT} := thunderbolt.o
+obj-${CONFIG_USB4} := thunderbolt.o
 thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o
 thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o usb4.o