Minor fixes to make the whole thing compile on latest 2.5 and kbuild2

drivers/input/joystick/Makefile

@@ -2,6 +2,24 @@
 # Makefile for the input core drivers.
 #
 
+# I-Force may need both USB and RS-232
+
+CONFIG_JOYSTICK_IFORCE := n
+
+ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
+	ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
+		CONFIG_JOYSTICK_IFORCE := y
+	endif
+endif
+
+ifeq ($(CONFIG_JOYSTICK_IFORCE_232),m)
+	CONFIG_JOYSTICK_IFORCE := m
+endif
+
+ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),m)
+	CONFIG_JOYSTICK_IFORCE := m
+endif
+
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
@@ -26,29 +44,7 @@ obj-$(CONFIG_JOYSTICK_TURBOGRAFX)	+= turbografx.o
 obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
 
-# I-Force may need both USB and RS-232
-
-CONFIG_JOYSTICK_IFORCE := n
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
-	ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
-		CONFIG_JOYSTICK_IFORCE := y
-	endif
-endif
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE_232),m)
-	CONFIG_JOYSTICK_IFORCE := m
-endif
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),m)
-	CONFIG_JOYSTICK_IFORCE := m
-endif
-
-subdir-$(CONFIG_JOYSTICK_IFORCE)	+= iforce
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE),y)
-	obj-y += iforce/iforce-drv.o
-endif
+obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/
 
 # The global Rules.make.
 

drivers/input/joystick/adi.c

@@ -426,10 +426,10 @@ static void adi_init_input(struct adi *adi, struct adi_port *port, int half)
 	adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
 
 	for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++)
-		set_bit(adi->abs[i], &adi->dev.absbit);
+		set_bit(adi->abs[i], adi->dev.absbit);
 
 	for (i = 0; i < adi->buttons; i++)
-		set_bit(adi->key[i], &adi->dev.keybit);
+		set_bit(adi->key[i], adi->dev.keybit);
 }
 
 static void adi_init_center(struct adi *adi)

drivers/input/joystick/iforce/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the I-Force driver
 #
 
-O_TARGET := iforce-drv.o
-
 # I-Force may need both USB and RS-232
 
 CONFIG_JOYSTICK_IFORCE := n
@@ -24,8 +22,12 @@ endif
 
 obj-$(CONFIG_JOYSTICK_IFORCE)	+= iforce.o 
 
+# The global Rules.make.
+
 include $(TOPDIR)/Rules.make
 
+# iforce.o is a multipart module.
+
 IFORCEOBJS = iforce-ff.o iforce-main.o iforce-packets.o
 
 ifneq ($(CONFIG_JOYSTICK_IFORCE_232),)
@@ -38,4 +40,3 @@ endif
 
 iforce.o: $(IFORCEOBJS) 
 	$(LD) -i $(IFORCEOBJS) -o $@
-

drivers/input/joystick/magellan.c

@@ -156,7 +156,7 @@ static void magellan_connect(struct serio *serio, struct serio_dev *dev)
 	magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);	
 
 	for (i = 0; i < 9; i++)
-		set_bit(magellan_buttons[i], &magellan->dev.keybit);
+		set_bit(magellan_buttons[i], magellan->dev.keybit);
 
 	for (i = 0; i < 6; i++) {
 		t = magellan_axes[i];

drivers/input/keyboard/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the input core drivers.
 #
 
-# The target object and module list name.
-
-O_TARGET	:= keybdrv.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o

drivers/input/keyboard/atkbd.c

@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serio.h>
+#include <linux/tqueue.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("AT and PS/2 keyboard driver");

drivers/input/mouse/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the mouse drivers.
 #
 
-# The target object and module list name.
-
-O_TARGET	:= mousedrv.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o

drivers/input/mouse/sermouse.c

@@ -253,11 +253,11 @@ static void sermouse_connect(struct serio *serio, struct serio_dev *dev)
 	sermouse->type = serio->type & SERIO_PROTO;
 	c = (serio->type & SERIO_EXTRA) >> 16;
 
-	if (c & 0x01) set_bit(BTN_MIDDLE, &sermouse->dev.keybit);
-	if (c & 0x02) set_bit(BTN_SIDE, &sermouse->dev.keybit);
-	if (c & 0x04) set_bit(BTN_EXTRA, &sermouse->dev.keybit);
-	if (c & 0x10) set_bit(REL_WHEEL, &sermouse->dev.relbit);
-	if (c & 0x20) set_bit(REL_HWHEEL, &sermouse->dev.relbit);
+	if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
+	if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
+	if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
+	if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
+	if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);
 
 	sprintf(sermouse->phys, "%s/input0", serio->phys);
 

drivers/input/serio/Config.in

@@ -5,7 +5,7 @@
 tristate 'Serial i/o support' CONFIG_SERIO
 
 dep_tristate '  i8042 PC Keyboard controller' CONFIG_SERIO_I8042 $CONFIG_SERIO $CONFIG_ISA
-if [ "$CONFIG_INPUT_I8042" != "n" ]; then
+if [ "$CONFIG_SERIO_I8042" != "n" ]; then
    hex '    Register Base Address' CONFIG_I8042_REG_BASE 60
    int '    PS/2 Keyboard IRQ' CONFIG_I8042_KBD_IRQ 1
    int '    PS/2 AUX IRQ' CONFIG_I8042_AUX_IRQ 12

drivers/input/touchscreen/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the mouse drivers.
 #
 
-# The target object and module list name.
-
-O_TARGET	:= tsdrv.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)	+= gunze.o

drivers/usb/input/aiptek.c

@@ -296,9 +296,8 @@ aiptek_probe(struct usb_device *dev, unsigned int ifnum,
 
 	input_register_device(&aiptek->dev);
 
-	printk(KERN_INFO "input%d: %s on usb%d:%d.%d\n",
-	       aiptek->dev.number, aiptek->features->name, dev->bus->busnum,
-	       dev->devnum, ifnum);
+	printk(KERN_INFO "input: %s on usb%d:%d.%d\n",
+	       aiptek->features->name, dev->bus->busnum, dev->devnum, ifnum);
 
 	return aiptek;
 }

include/linux/input.h

@@ -2,7 +2,7 @@
 #define _INPUT_H
 
 /*
- * $Id: input.h,v 1.57 2002/01/02 11:59:56 vojtech Exp $
+ * $Id: input.h,v 1.68 2002/05/31 10:35:49 fsirl Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
@@ -322,12 +322,13 @@ struct input_event {
 #define KEY_FINANCE		219
 #define KEY_SPORT		220
 #define KEY_SHOP		221
-
-#define KEY_UNKNOWN		240
-
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223
 #define KEY_BRIGHTNESSDOWN	224
 #define KEY_BRIGHTNESSUP	225
 
+#define KEY_UNKNOWN		240
+
 #define BTN_MISC		0x100
 #define BTN_0			0x100
 #define BTN_1			0x101
@@ -394,6 +395,10 @@ struct input_event {
 #define BTN_STYLUS		0x14b
 #define BTN_STYLUS2		0x14c
 
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
 #define KEY_MAX			0x1ff
 
 /*
@@ -514,23 +519,19 @@ struct input_event {
  * Structures used in ioctls to upload effects to a device
  * The first structures are not passed directly by using ioctls.
  * They are sub-structures of the actually sent structure (called ff_effect)
- *
- * Ranges:
- *  0 <= __u16 <= 65535
- *  -32767 <= __s16 <= +32767     ! Not -32768 for lower bound !
  */
 
 struct ff_replay {
-	__u16 length;		/* Duration of an effect in ms. All other times are also expressed in ms */
-	__u16 delay;		/* Time to wait before to start playing an effect */
+	__u16 length; /* Duration of an effect in ms. All other times are also expressed in ms */
+	__u16 delay;  /* Time to wait before to start playing an effect */
 };
 
 struct ff_trigger {
-	__u16 button;		/* Number of button triggering an effect */
-	__u16 interval;		/* Time to wait before an effect can be re-triggered (ms) */
+	__u16 button;   /* Number of button triggering an effect */
+	__u16 interval; /* Time to wait before an effect can be re-triggered (ms) */
 };
 
-struct ff_shape {
+struct ff_envelope {
 	__u16 attack_length;	/* Duration of attack (ms) */
 	__u16 attack_level;	/* Level at beginning of attack */
 	__u16 fade_length;	/* Duration of fade (ms) */
@@ -539,41 +540,56 @@ struct ff_shape {
 
 /* FF_CONSTANT */
 struct ff_constant_effect {
-	__s16 level;		/* Strength of effect. Negative values are OK */
-	struct ff_shape shape;
+	__s16 level;	    /* Strength of effect. Negative values are OK */
+	struct ff_envelope envelope;
 };
 
-/* FF_SPRING of FF_FRICTION */
-struct ff_interactive_effect {
-/* Axis along which effect must be created. If null, the field named direction
- * is used
- * It is a bit array (ie to enable axes X and Y, use BIT(ABS_X) | BIT(ABS_Y)
- * It overrides the value of ff_effect::direction, which is used only if
- * axis == 0
- */
-	__u16 axis;
+/* FF_RAMP */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
 
+/* FF_SPRING of FF_FRICTION */
+struct ff_condition_effect {
 	__u16 right_saturation; /* Max level when joystick is on the right */
-	__u16 left_saturation;	/* Max level when joystick in on the left */
+	__u16 left_saturation;  /* Max level when joystick in on the left */
 
 	__s16 right_coeff;	/* Indicates how fast the force grows when the
 				   joystick moves to the right */
 	__s16 left_coeff;	/* Same for left side */
 
-	__u16 deadband;		/* Size of area where no force is produced */
-	__s16 center;		/* Position of dead dead zone */
+	__u16 deadband;	/* Size of area where no force is produced */
+	__s16 center;	/* Position of dead zone */
 
 };
 
 /* FF_PERIODIC */
 struct ff_periodic_effect {
-	__u16 waveform;		/* Kind of wave (sine, square...) */
-	__u16 period;		/* in ms */
+	__u16 waveform;	/* Kind of wave (sine, square...) */
+	__u16 period;	/* in ms */
 	__s16 magnitude;	/* Peak value */
-	__s16 offset;		/* Mean value of wave (roughly) */
+	__s16 offset;	/* Mean value of wave (roughly) */
 	__u16 phase;		/* 'Horizontal' shift */
 
-	struct ff_shape shape;
+	struct ff_envelope envelope;
+
+/* Only used if waveform == FF_CUSTOM */
+	__u32 custom_len;	/* Number of samples  */	
+	__s16 *custom_data;	/* Buffer of samples */
+/* Note: the data pointed by custom_data is copied by the driver. You can
+ * therefore dispose of the memory after the upload/update */
+};
+
+/* FF_RUMBLE */
+/* Some rumble pads have two motors of different weight.
+   strong_magnitude represents the magnitude of the vibration generated
+   by the heavy motor.
+*/
+struct ff_rumble_effect {
+	__u16 strong_magnitude;  /* Magnitude of the heavy motor */
+	__u16 weak_magnitude;    /* Magnitude of the light one */
 };
 
 /*
@@ -598,26 +614,13 @@ struct ff_effect {
 
 	union {
 		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
 		struct ff_periodic_effect periodic;
-		struct ff_interactive_effect interactive;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
 	} u;
 };
 
-/*
- * Buttons that can trigger effects. Use for example FF_BTN(BTN_TRIGGER) to
- * access the bitmap.
- */
-
-#define FF_BTN(x)	((x) - BTN_MISC + FF_BTN_OFFSET)
-#define FF_BTN_OFFSET	0x00
-
-/*
- * Force feedback axis mappings. Use FF_ABS() to access the bitmap.
- */
-
-#define FF_ABS(x)	((x) + FF_ABS_OFFSET)
-#define FF_ABS_OFFSET	0x40
-
 /*
  * Force feedback effect types
  */
@@ -627,6 +630,9 @@ struct ff_effect {
 #define FF_CONSTANT	0x52
 #define FF_SPRING	0x53
 #define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
 
 /*
  * Force feedback periodic effect types
@@ -668,8 +674,6 @@ struct input_dev {
 	char *name;
 	char *phys;
 	char *uniq;
-	int number;
-
 	unsigned short idbus;
 	unsigned short idvendor;
 	unsigned short idproduct;
@@ -707,8 +711,6 @@ struct input_dev {
 	int absfuzz[ABS_MAX + 1];
 	int absflat[ABS_MAX + 1];
 
-	int only_one_writer;
-
 	int (*open)(struct input_dev *dev);
 	void (*close)(struct input_dev *dev);
 	int (*accept)(struct input_dev *dev, struct file *file);