e1000: prevent oops when adapter is being closed and reset simultaneously

This change is based on a similar change made to e1000e support in
commit bb9e44d0 ("e1000e: prevent oops when adapter is being closed
and reset simultaneously").  The same issue has also been observed
on the older e1000 cards.

Here, we have increased the RESET_COUNT value to 50 because there are too
many accesses to e1000 nic on stress tests to e1000 nic, it is not enough
to set RESET_COUT 25. Experimentation has shown that it is enough to set
RESET_COUNT 50.
Signed-off-by: yzhu1 <yanjun.zhu@windriver.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000/e1000.h

@@ -83,6 +83,11 @@ struct e1000_adapter;
 
 #define E1000_MAX_INTR			10
 
+/*
+ * Count for polling __E1000_RESET condition every 10-20msec.
+ */
+#define E1000_CHECK_RESET_COUNT	50
+
 /* TX/RX descriptor defines */
 #define E1000_DEFAULT_TXD		256
 #define E1000_MAX_TXD			256

drivers/net/ethernet/intel/e1000/e1000_main.c

@@ -1440,6 +1440,10 @@ static int e1000_close(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	int count = E1000_CHECK_RESET_COUNT;
+
+	while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+		usleep_range(10000, 20000);
 
 	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 	e1000_down(adapter);
@@ -4963,6 +4967,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	netif_device_detach(netdev);
 
 	if (netif_running(netdev)) {
+		int count = E1000_CHECK_RESET_COUNT;
+
+		while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+			usleep_range(10000, 20000);
+
 		WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 		e1000_down(adapter);
 	}