V4L/DVB (4295): Fix typo in comment for TDA9819

Fix typo in comment for TDA9819
Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/ttpci/av7110.c

@@ -2203,8 +2203,8 @@ static int frontend_init(struct av7110 *av7110)
 				av7110->fe->ops.tuner_ops.set_params = nexusca_stv0297_tuner_set_params;
 
 				/* set TDA9819 into DVB mode */
-				saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD)
-				saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF)
+				saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
+				saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
 
 				/* tuner on this needs a slower i2c bus speed */
 				av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;

drivers/media/dvb/ttpci/av7110_v4l.c

@@ -272,8 +272,8 @@ static int av7110_dvb_c_switch(struct saa7146_fh *fh)
 				if (ves1820_writereg(dev, 0x09, 0x0f, 0x60))
 					dprintk(1, "setting band in demodulator failed.\n");
 			} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
-				saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9198 pin9(STD)
-				saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9198 pin30(VIF)
+				saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9819 pin9(STD)
+				saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9819 pin30(VIF)
 			}
 			if (i2c_writereg(av7110, 0x48, 0x02, 0xd0) != 1)
 				dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num);
@@ -308,8 +308,8 @@ static int av7110_dvb_c_switch(struct saa7146_fh *fh)
 			if (ves1820_writereg(dev, 0x09, 0x0f, 0x20))
 				dprintk(1, "setting band in demodulator failed.\n");
 		} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
-			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD)
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF)
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
+			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
 		}
 	}
 
@@ -750,8 +750,8 @@ int av7110_init_analog_module(struct av7110 *av7110)
 			if (ves1820_writereg(av7110->dev, 0x09, 0x0f, 0x20))
 				dprintk(1, "setting band in demodulator failed.\n");
 		} else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) {
-			saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD)
-			saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF)
+			saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD)
+			saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF)
 		}
 
 		/* init the saa7113 */