Commit 6b0c3d44 authored by Sam Ravnborg's avatar Sam Ravnborg Committed by Ingo Molnar

x86: unify arch/x86/kernel/Makefile(s)

Combine the 32 and 64 bit specific Makefiles in one file.
While doing so link order was (almost) preserved on 32 bit
but on 64 bit link order changed a lot.

Patch was checked with defconfig + allyesconfig builds.
The same .o files were linked in these configurations.

To keep readability of the Makefiles a few Kconfig
symbols was added/modified and it was checked that
they were not used anywhere else.
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent d531b4fd
......@@ -129,9 +129,17 @@ config GENERIC_PENDING_IRQ
config X86_SMP
bool
depends on X86_32 && SMP && !X86_VOYAGER
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
default y
config X86_32_SMP
def_bool y
depends on X86_32 && SMP
config X86_64_SMP
def_bool y
depends on X86_64 && SMP
config X86_HT
bool
depends on SMP
......
......@@ -75,8 +75,7 @@ config X86_FIND_SMP_CONFIG
config X86_MPPARSE
def_bool y
depends on X86_LOCAL_APIC && !X86_VISWS
depends on X86_32
depends on (X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64
config DOUBLEFAULT
default y
......
ifeq ($(CONFIG_X86_32),y)
include ${srctree}/arch/x86/kernel/Makefile_32
else
include ${srctree}/arch/x86/kernel/Makefile_64
endif
#
# Makefile for the linux kernel.
#
extra-y := head_$(BITS).o init_task.o vmlinux.lds
extra-$(CONFIG_X86_64) += head64.o
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
CFLAGS_vsyscall_64.o := $(PROFILING) -g0
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport_$(BITS).o ldt.o
obj-y += setup_$(BITS).o i8259_$(BITS).o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
obj-y += pci-dma_$(BITS).o bootflag.o e820_$(BITS).o
obj-y += quirks.o i8237.o topology.o
obj-y += alternative.o i8253.o
obj-$(CONFIG_X86_64) += pci-nommu_64.o bugs_64.o
obj-y += tsc_$(BITS).o io_delay.o rtc.o
obj-y += i387.o
obj-y += ptrace.o
obj-y += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot_32.o
obj-$(CONFIG_X86_64) += reboot_64.o
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_PCI) += early-quirks.o
obj-$(CONFIG_APM) += apm_32.o
obj-$(CONFIG_X86_SMP) += smp_$(BITS).o smpboot_$(BITS).o tsc_sync.o
obj-$(CONFIG_X86_32_SMP) += smpcommon_32.o
obj-$(CONFIG_X86_64_SMP) += smp_64.o smpboot_64.o tsc_sync.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse_$(BITS).o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
obj-$(CONFIG_X86_VSMP) += vsmp_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module_$(BITS).o
obj-$(CONFIG_ACPI_SRAT) += srat_32.o
obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
# Workaround to delete .lds files with make clean
# The problem is that we do not enter Makefile_32 with make clean.
clean-files := vsyscall*.lds vsyscall*.so
obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
obj-y += pcspeaker.o
obj-$(CONFIG_SCx200) += scx200_32.o
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
obj-y += genapic_64.o genapic_flat_64.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
obj-$(CONFIG_PM) += suspend_64.o
obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o
obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
endif
#
# Makefile for the linux kernel.
#
extra-y := head_32.o init_task.o vmlinux.lds
CPPFLAGS_vmlinux.lds += -Ui386
obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
time_32.o ioport_32.o ldt.o setup_32.o i8259_32.o sys_i386_32.o \
pci-dma_32.o i386_ksyms_32.o bootflag.o e820_32.o\
quirks.o i8237.o topology.o alternative.o i8253.o tsc_32.o io_delay.o rtc.o
obj-y += i387.o
obj-y += ptrace.o
obj-y += ds.o
obj-y += tls.o
obj-y += step.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot_32.o
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_PCI) += early-quirks.o
obj-$(CONFIG_APM) += apm_32.o
obj-$(CONFIG_X86_SMP) += smp_32.o smpboot_32.o tsc_sync.o
obj-$(CONFIG_SMP) += smpcommon_32.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_32.o
obj-$(CONFIG_X86_MPPARSE) += mpparse_32.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_32.o nmi_32.o
obj-$(CONFIG_X86_IO_APIC) += io_apic_32.o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
obj-$(CONFIG_KEXEC) += machine_kexec_32.o relocate_kernel_32.o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_32.o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module_32.o
obj-$(CONFIG_ACPI_SRAT) += srat_32.o
obj-$(CONFIG_EFI) += efi.o efi_32.o efi_stub_32.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_32.o
obj-y += pcspeaker.o
obj-$(CONFIG_SCx200) += scx200_32.o
#
# Makefile for the linux kernel.
#
extra-y := head_64.o head64.o init_task.o vmlinux.lds
CPPFLAGS_vmlinux.lds += -Ux86_64
obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
time_64.o ioport_64.o ldt.o setup_64.o i8259_64.o sys_x86_64.o \
x8664_ksyms_64.o syscall_64.o vsyscall_64.o \
setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \
pci-dma_64.o pci-nommu_64.o alternative.o hpet.o tsc_64.o bugs_64.o \
i8253.o io_delay.o rtc.o
obj-y += ptrace.o
obj-y += ds.o
obj-y += step.o
obj-y += i387.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
obj-y += acpi/
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_SMP) += smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o
obj-y += apic_64.o nmi_64.o
obj-y += io_apic_64.o mpparse_64.o genapic_64.o genapic_flat_64.o
obj-$(CONFIG_KEXEC) += machine_kexec_64.o relocate_kernel_64.o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o
obj-$(CONFIG_PM) += suspend_64.o
obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_X86_VSMP) += vsmp_64.o
obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_AUDIT) += audit_64.o
obj-$(CONFIG_EFI) += efi.o efi_64.o efi_stub_64.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_64.o
obj-$(CONFIG_MODULES) += module_64.o
obj-$(CONFIG_PCI) += early-quirks.o
obj-y += topology.o
obj-y += pcspeaker.o
CFLAGS_vsyscall_64.o := $(PROFILING) -g0
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment