IBM Currituck: Clean up board specific code before adding Akebono code

The IBM Akebono code uses the same initialisation functions as the
earlier Currituck board. Rather than create a copy of this code for
Akebono we will instead integrate support for it into the same file as
the Currituck code.

This patch just renames the board support file and updates the Makefile.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/44x/Makefile

@@ -10,4 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
-obj-$(CONFIG_CURRITUCK)	+= currituck.o
+obj-$(CONFIG_CURRITUCK)	+= ppc476.o

arch/powerpc/platforms/44x/currituck.c → arch/powerpc/platforms/44x/ppc476.c

 /*
- * Currituck board specific routines
+ * PowerPC 476FPE board specific routines
  *
  * Copyright © 2011 Tony Breeds IBM Corporation
  *
@@ -36,7 +36,7 @@
 
 #include <linux/pci.h>
 
-static __initdata struct of_device_id ppc47x_of_bus[] = {
+static struct of_device_id ppc47x_of_bus[] __initdata = {
 	{ .compatible = "ibm,plb4", },
 	{ .compatible = "ibm,plb6", },
 	{ .compatible = "ibm,opb", },
@@ -157,7 +157,7 @@ static void __init ppc47x_setup_arch(void)
 {
 
 	/* No need to check the DMA config as we /know/ our windows are all of
- 	 * RAM.  Lets hope that doesn't change */
+	 * RAM.  Lets hope that doesn't change */
 	swiotlb_detect_4g();
 
 	ppc47x_smp_init();
@@ -208,7 +208,7 @@ machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
 static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
 {
 	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
-	                              dev->device == 0x00e0)) {
+				      dev->device == 0x00e0)) {
 		if (board_rev == 0) {
 			dev->irq = irq_create_mapping(NULL, 47);
 			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);