drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6

Displayport compliance test 4.2.2.6 requires that a source device be capable of
detecting a corrupt EDID. The test specification states that the sink device
sets up the EDID with an invalid checksum. To do this, the sink sets up an
invalid EDID header, expecting the source device to generate the checksum and
compare it to the value stored in the last byte of the block data.

Unfortunately, the DRM EDID reading and parsing functions are actually too good
in this case; the header is fixed before the checksum is computed and thus the
test never sees the invalid checksum. This results in a failure to pass the
compliance test.

To correct this issue, when the EDID code detects that the header is invalid,
a flag is set to indicate that the EDID is corrupted. In this case, it sets
edid_corrupt flag and continues with its fix-up code. This flag is also set in
the case of a more seriously damaged header (fixup score less than the
threshold). For consistency, the edid_corrupt flag is also set when the
checksum is invalid as well.

V2:
- Removed the static bool global
- Added a bool to the drm_connector struct to reaplce the static one for
  holding the status of raw edid header corruption detection
- Modified the function signature of the is_valid function to take an
  additional parameter to store the corruption detected value
- Fixed the other callers of the above is_valid function
V3:
- Updated the commit message to be more clear about what and why this
  patch does what it does.
- Added comment in code to clarify the operations there
- Removed compliance variable and check_link_status update; those
  have been moved to a later patch
- Removed variable assignment from the bottom of the test handler
V4:
- Removed i915 tag from subject line as the patch is not i915-specific
V5:
- Moved code causing a compilation error to this patch where the variable
  is actually declared
- Maintained blank lines / spacing so as to not contaminate the patch
V6:
- Removed extra debug messages
- Added documentation to for the added parameter on drm_edid_block_valid
- Fixed more whitespace issues in check_link_status
- Added a clear of the header_corrupt flag to the end of the test handler
  in intel_dp.c
- Changed the usage of the new function prototype in several places to use
  NULL where it is not needed by compliance testing
V7:
- Updated to account for long_pulse flag propagation
V8:
- Removed clearing of header_corrupt flag from the test handler in intel_dp.c
- Added clearing of header_corrupt flag in the drm_edid_block_valid function
V9:
- Renamed header_corrupt flag to edid_corrupt to more accurately reflect its
  value and purpose
- Updated commit message
V10:
- Updated for versioning and patch swizzle
- Revised the title to more accurately reflect the nature and contents of
  the patch
- Fixed formatting/whitespace problems
- Added set flag when computed checksum is invalid
Signed-off-by: Todd Previte <tprevite@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/drm_edid.c

@@ -1041,13 +1041,15 @@ static bool drm_edid_is_zero(const u8 *in_edid, int length)
  * @raw_edid: pointer to raw EDID block
  * @block: type of block to validate (0 for base, extension otherwise)
  * @print_bad_edid: if true, dump bad EDID blocks to the console
+ * @edid_corrupt: if true, the header or checksum is invalid
  *
  * Validate a base or extension EDID block and optionally dump bad blocks to
  * the console.
  *
  * Return: True if the block is valid, false otherwise.
  */
-bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
+bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
+			  bool *edid_corrupt)
 {
 	u8 csum;
 	struct edid *edid = (struct edid *)raw_edid;
@@ -1060,11 +1062,22 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
 
 	if (block == 0) {
 		int score = drm_edid_header_is_valid(raw_edid);
-		if (score == 8) ;
-		else if (score >= edid_fixup) {
+		if (score == 8) {
+			if (edid_corrupt)
+				*edid_corrupt = 0;
+		} else if (score >= edid_fixup) {
+			/* Displayport Link CTS Core 1.2 rev1.1 test 4.2.2.6
+			 * The corrupt flag needs to be set here otherwise, the
+			 * fix-up code here will correct the problem, the
+			 * checksum is correct and the test fails
+			 */
+			if (edid_corrupt)
+				*edid_corrupt = 1;
 			DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
 			memcpy(raw_edid, edid_header, sizeof(edid_header));
 		} else {
+			if (edid_corrupt)
+				*edid_corrupt = 1;
 			goto bad;
 		}
 	}
@@ -1075,6 +1088,9 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
 			DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
 		}
 
+		if (edid_corrupt)
+			*edid_corrupt = 1;
+
 		/* allow CEA to slide through, switches mangle this */
 		if (raw_edid[0] != 0x02)
 			goto bad;
@@ -1129,7 +1145,7 @@ bool drm_edid_is_valid(struct edid *edid)
 		return false;
 
 	for (i = 0; i <= edid->extensions; i++)
-		if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true))
+		if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true, NULL))
 			return false;
 
 	return true;
@@ -1232,7 +1248,8 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 	for (i = 0; i < 4; i++) {
 		if (get_edid_block(data, block, 0, EDID_LENGTH))
 			goto out;
-		if (drm_edid_block_valid(block, 0, print_bad_edid))
+		if (drm_edid_block_valid(block, 0, print_bad_edid,
+					 &connector->edid_corrupt))
 			break;
 		if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
 			connector->null_edid_counter++;
@@ -1257,7 +1274,10 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 				  block + (valid_extensions + 1) * EDID_LENGTH,
 				  j, EDID_LENGTH))
 				goto out;
-			if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH, j, print_bad_edid)) {
+			if (drm_edid_block_valid(block + (valid_extensions + 1)
+						 * EDID_LENGTH, j,
+						 print_bad_edid,
+						 NULL)) {
 				valid_extensions++;
 				break;
 			}

drivers/gpu/drm/drm_edid_load.c

@@ -216,7 +216,8 @@ static void *edid_load(struct drm_connector *connector, const char *name,
 		goto out;
 	}
 
-	if (!drm_edid_block_valid(edid, 0, print_bad_edid)) {
+	if (!drm_edid_block_valid(edid, 0, print_bad_edid,
+				  &connector->edid_corrupt)) {
 		connector->bad_edid_counter++;
 		DRM_ERROR("Base block of EDID firmware \"%s\" is invalid ",
 		    name);
@@ -229,7 +230,9 @@ static void *edid_load(struct drm_connector *connector, const char *name,
 		if (i != valid_extensions + 1)
 			memcpy(edid + (valid_extensions + 1) * EDID_LENGTH,
 			    edid + i * EDID_LENGTH, EDID_LENGTH);
-		if (drm_edid_block_valid(edid + i * EDID_LENGTH, i, print_bad_edid))
+		if (drm_edid_block_valid(edid + i * EDID_LENGTH, i,
+					 print_bad_edid,
+					 NULL))
 			valid_extensions++;
 	}
 

include/drm/drm_crtc.h

@@ -719,6 +719,11 @@ struct drm_connector {
 	int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
 	unsigned bad_edid_counter;
 
+	/* Flag for raw EDID header corruption - used in Displayport
+	 * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
+	 */
+	bool edid_corrupt;
+
 	struct dentry *debugfs_entry;
 
 	struct drm_connector_state *state;
@@ -1443,7 +1448,8 @@ extern void drm_set_preferred_mode(struct drm_connector *connector,
 				   int hpref, int vpref);
 
 extern int drm_edid_header_is_valid(const u8 *raw_edid);
-extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid);
+extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
+				 bool *edid_corrupt);
 extern bool drm_edid_is_valid(struct edid *edid);
 
 extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,