[ARM PATCH] 2448/1: Remove PrPMC1100 platform

Patch from Deepak Saxena

No longer maintained, not sure one can even buy one of these.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

arch/arm/mach-ixp4xx/Makefile

@@ -7,6 +7,5 @@ obj-y	+= common.o common-pci.o
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pci.o ixdp425-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
-obj-$(CONFIG_ARCH_PRPMC1100)	+= prpmc1100-pci.o prpmc1100-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
 

arch/arm/mach-ixp4xx/prpmc1100-pci.c

-/*
- * arch/arm/mach-ixp4xx/prpmc1100-pci.c 
- *
- * PrPMC1100 PCI initialization
- *
- * Copyright (C) 2003-2004 MontaVista Sofwtare, Inc. 
- * Based on IXDP425 code originally (C) Intel Corporation
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * PrPMC1100 PCI init code.  GPIO usage is similar to that on 
- * IXDP425, but the IRQ routing is completely different and
- * depends on what carrier you are using. This code is written
- * to work on the Motorola PrPMC800 ATX carrier board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach/pci.h>
-
-
-void __init prpmc1100_pci_preinit(void)
-{
-	gpio_line_config(PRPMC1100_PCI_INTA_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(PRPMC1100_PCI_INTB_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(PRPMC1100_PCI_INTC_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(PRPMC1100_PCI_INTD_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-
-	gpio_line_isr_clear(PRPMC1100_PCI_INTA_PIN);
-	gpio_line_isr_clear(PRPMC1100_PCI_INTB_PIN);
-	gpio_line_isr_clear(PRPMC1100_PCI_INTC_PIN);
-	gpio_line_isr_clear(PRPMC1100_PCI_INTD_PIN);
-
-	ixp4xx_pci_preinit();
-}
-
-
-static int __init prpmc1100_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = -1;
-
-	static int pci_irq_table[][4] = { 
-		{	/* IDSEL 16 - PMC A1 */
-			IRQ_PRPMC1100_PCI_INTD, 
-			IRQ_PRPMC1100_PCI_INTA, 
-			IRQ_PRPMC1100_PCI_INTB, 
-			IRQ_PRPMC1100_PCI_INTC
-		}, {	/* IDSEL 17 - PRPMC-A-B */
-			IRQ_PRPMC1100_PCI_INTD, 
-			IRQ_PRPMC1100_PCI_INTA, 
-			IRQ_PRPMC1100_PCI_INTB, 
-			IRQ_PRPMC1100_PCI_INTC
-		}, { 	/* IDSEL 18 - PMC A1-B */
-			IRQ_PRPMC1100_PCI_INTA, 
-			IRQ_PRPMC1100_PCI_INTB, 
-			IRQ_PRPMC1100_PCI_INTC, 
-			IRQ_PRPMC1100_PCI_INTD
-		}, {	/* IDSEL 19 - Unused */
-			0, 0, 0, 0 
-		}, {	/* IDSEL 20 - P2P Bridge */
-			IRQ_PRPMC1100_PCI_INTA, 
-			IRQ_PRPMC1100_PCI_INTB, 
-			IRQ_PRPMC1100_PCI_INTC, 
-			IRQ_PRPMC1100_PCI_INTD
-		}, {	/* IDSEL 21 - PMC A2 */
-			IRQ_PRPMC1100_PCI_INTC, 
-			IRQ_PRPMC1100_PCI_INTD, 
-			IRQ_PRPMC1100_PCI_INTA, 
-			IRQ_PRPMC1100_PCI_INTB
-		}, {	/* IDSEL 22 - PMC A2-B */
-			IRQ_PRPMC1100_PCI_INTD, 
-			IRQ_PRPMC1100_PCI_INTA, 
-			IRQ_PRPMC1100_PCI_INTB, 
-			IRQ_PRPMC1100_PCI_INTC
-		},
-	};
-
-	if (slot >= PRPMC1100_PCI_MIN_DEVID && slot <= PRPMC1100_PCI_MAX_DEVID 
-		&& pin >= 1 && pin <= PRPMC1100_PCI_IRQ_LINES) {
-		irq = pci_irq_table[slot - PRPMC1100_PCI_MIN_DEVID][pin - 1];
-	}
-
-	return irq;
-}
-
-
-struct hw_pci prpmc1100_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =	  prpmc1100_pci_preinit,
-	.swizzle =	  pci_std_swizzle,
-	.setup =	  ixp4xx_setup,
-	.scan =		  ixp4xx_scan_bus,
-	.map_irq =	  prpmc1100_map_irq,
-};
-
-int __init prpmc1100_pci_init(void)
-{
-	if (machine_is_prpmc1100())
-		pci_common_init(&prpmc1100_pci);
-	return 0;
-}
-
-subsys_initcall(prpmc1100_pci_init);
-

arch/arm/mach-ixp4xx/prpmc1100-setup.c

-/*
- * arch/arm/mach-ixp4xx/prpmc1100-setup.c
- *
- * Motorola PrPMC1100 board setup
- *
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#ifdef	__ARMEB__
-#define	REG_OFFSET	3
-#else
-#define	REG_OFFSET	0
-#endif
-
-/*
- * Only one serial port is connected on the PrPMC1100
- */
-static struct uart_port prpmc1100_serial_port = {
-	.membase	= (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET),
-	.mapbase	= (IXP4XX_UART1_BASE_PHYS),
-	.irq		= IRQ_IXP4XX_UART1,
-	.flags		= UPF_SKIP_TEST,
-	.iotype		= UPIO_MEM,	
-	.regshift	= 2,
-	.uartclk	= IXP4XX_UART_XTAL,
-	.line		= 0,
-	.type		= PORT_XSCALE,
-	.fifosize	= 32
-};
-
-void __init prpmc1100_map_io(void)
-{
-	early_serial_setup(&prpmc1100_serial_port);
-
-	ixp4xx_map_io();
-}
-
-static struct flash_platform_data prpmc1100_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource prpmc1100_flash_resource = {
-	.start		= PRPMC1100_FLASH_BASE,
-	.end		= PRPMC1100_FLASH_BASE + PRPMC1100_FLASH_SIZE,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device prpmc1100_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &prpmc1100_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &prpmc1100_flash_resource,
-};
-
-static struct platform_device *prpmc1100_devices[] __initdata = {
-	&prpmc1100_flash
-};
-
-static void __init prpmc1100_init(void)
-{
-	ixp4xx_sys_init();
-
-	platform_add_devices(prpmc1100_devices, ARRAY_SIZE(prpmc1100_devices));
-}
-
-MACHINE_START(PRPMC1100, "Motorola PrPMC1100")
-        MAINTAINER("MontaVista Software, Inc.")
-        BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
-                IXP4XX_PERIPHERAL_BASE_VIRT)
-        MAPIO(prpmc1100_map_io)
-        INITIRQ(ixp4xx_init_irq)
-	.timer		= &ixp4xx_timer,
-        BOOT_PARAMS(0x0100)
-	INIT_MACHINE(prpmc1100_init)
-MACHINE_END
-