Merge tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi

Pull HSI updates from Sebastian Reichel:

 - add HSI OMAP4 bindings

 - misc small fixes

* tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  dt-bindings: hsi: add omap4 hsi controller bindings
  HSI: hsi_char: pr_err() strings should end with newlines
  HSI: omap_ssi_core: fix kilo to be "k" not "K"

Documentation/devicetree/bindings/hsi/omap-ssi.txt

 OMAP SSI controller bindings
 
-OMAP Synchronous Serial Interface (SSI) controller implements a legacy
-variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+OMAP3's Synchronous Serial Interface (SSI) controller implements a
+legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
+while the controller found inside OMAP4 is supposed to be fully compliant
+with the HSI standard.
 
 Required properties:
-- compatible:		Should include "ti,omap3-ssi".
+- compatible:		Should include "ti,omap3-ssi" or "ti,omap4-hsi"
 - reg-names:		Contains the values "sys" and "gdd" (in this order).
 - reg:			Contains a matching register specifier for each entry
 			in reg-names.
@@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device.
 Required Port sub-node properties:
 - compatible:		Should be set to the following value
 			ti,omap3-ssi-port (applicable to OMAP34xx devices)
+			ti,omap4-hsi-port (applicable to OMAP44xx devices)
 - reg-names:		Contains the values "tx" and "rx" (in this order).
 - reg:			Contains a matching register specifier for each entry
 			in reg-names.
@@ -38,6 +41,10 @@ Required Port sub-node properties:
 			property. If it's missing the port will not be
 			enabled.
 
+Optional properties:
+- ti,hwmods:		Shall contain TI interconnect module name if needed
+			by the SoC
+
 Example for Nokia N900:
 
 ssi-controller@48058000 {

drivers/hsi/clients/hsi_char.c

@@ -773,13 +773,13 @@ static int __init hsc_init(void)
 
 	if ((max_data_size < 4) || (max_data_size > 0x10000) ||
 		(max_data_size & (max_data_size - 1))) {
-		pr_err("Invalid max read/write data size");
+		pr_err("Invalid max read/write data size\n");
 		return -EINVAL;
 	}
 
 	ret = hsi_register_client_driver(&hsc_driver);
 	if (ret) {
-		pr_err("Error while registering HSI/SSI driver %d", ret);
+		pr_err("Error while registering HSI/SSI driver %d\n", ret);
 		return ret;
 	}
 

drivers/hsi/controllers/omap_ssi_core.c

@@ -334,7 +334,7 @@ static int ssi_clk_event(struct notifier_block *nb, unsigned long event,
 	case POST_RATE_CHANGE:
 		dev_dbg(&ssi->device, "post rate change (%lu -> %lu)\n",
 			clk_data->old_rate, clk_data->new_rate);
-		omap_ssi->fck_rate = DIV_ROUND_CLOSEST(clk_data->new_rate, 1000); /* KHz */
+		omap_ssi->fck_rate = DIV_ROUND_CLOSEST(clk_data->new_rate, 1000); /* kHz */
 
 		for (i = 0; i < ssi->num_ports; i++) {
 			omap_port = omap_ssi->port[i];
@@ -467,9 +467,9 @@ static int ssi_hw_init(struct hsi_controller *ssi)
 	}
 	/* Resetting GDD */
 	writel_relaxed(SSI_SWRESET, omap_ssi->gdd + SSI_GDD_GRST_REG);
-	/* Get FCK rate in KHz */
+	/* Get FCK rate in kHz */
 	omap_ssi->fck_rate = DIV_ROUND_CLOSEST(ssi_get_clk_rate(ssi), 1000);
-	dev_dbg(&ssi->device, "SSI fck rate %lu KHz\n", omap_ssi->fck_rate);
+	dev_dbg(&ssi->device, "SSI fck rate %lu kHz\n", omap_ssi->fck_rate);
 
 	writel_relaxed(SSI_CLK_AUTOGATING_ON, omap_ssi->sys + SSI_GDD_GCR_REG);
 	omap_ssi->gdd_gcr = SSI_CLK_AUTOGATING_ON;