ad525x_dpot: add support for SPI parts

Split the bus logic out into separate files so that we can handle I2C and
SPI busses independently.  The new SPI bus logic brings in support for a
lot more parts:

	AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
	AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
	AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
	AD7376, AD8400, AD8402, AD8403, ADN2850

[randy.dunlap@oracle.com: fix ad525X_dpot build]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc/Kconfig

@@ -14,11 +14,15 @@ menuconfig MISC_DEVICES
 if MISC_DEVICES
 
 config AD525X_DPOT
-	tristate "Analog Devices AD525x Digital Potentiometers"
-	depends on I2C && SYSFS
+	tristate "Analog Devices Digital Potentiometers"
+	depends on (I2C || SPI) && SYSFS
 	help
 	  If you say yes here, you get support for the Analog Devices
-	  AD5258, AD5259, AD5251, AD5252, AD5253, AD5254 and AD5255
+	  AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+	  AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+	  AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+	  AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+	  AD7376, AD8400, AD8402, AD8403, ADN2850
 	  digital potentiometer chips.
 
 	  See Documentation/misc-devices/ad525x_dpot.txt for the
@@ -27,6 +31,26 @@ config AD525X_DPOT
 	  This driver can also be built as a module.  If so, the module
 	  will be called ad525x_dpot.
 
+config AD525X_DPOT_I2C
+	tristate "support I2C bus connection"
+	depends on AD525X_DPOT && I2C
+	help
+	  Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+	tristate "support SPI bus connection"
+	depends on AD525X_DPOT && SPI_MASTER
+	help
+	  Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad525x_dpot-spi.
+
 config ATMEL_PWM
 	tristate "Atmel AT32/AT91 PWM support"
 	depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9

drivers/misc/Makefile

@@ -4,6 +4,8 @@
 
 obj-$(CONFIG_IBM_ASM)		+= ibmasm/
 obj-$(CONFIG_AD525X_DPOT)	+= ad525x_dpot.o
+obj-$(CONFIG_AD525X_DPOT_I2C)	+= ad525x_dpot-i2c.o
+obj-$(CONFIG_AD525X_DPOT_SPI)	+= ad525x_dpot-spi.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o

drivers/misc/ad525x_dpot-i2c.c

+/*
+ * Driver for the Analog Devices digital potentiometers (I2C bus)
+ *
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include "ad525x_dpot.h"
+
+/* ------------------------------------------------------------------------- */
+/* I2C bus functions */
+static int write_d8(void *client, u8 val)
+{
+	return i2c_smbus_write_byte(client, val);
+}
+
+static int write_r8d8(void *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int write_r8d16(void *client, u8 reg, u16 val)
+{
+	return i2c_smbus_write_word_data(client, reg, val);
+}
+
+static int read_d8(void *client)
+{
+	return i2c_smbus_read_byte(client);
+}
+
+static int read_r8d8(void *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int read_r8d16(void *client, u8 reg)
+{
+	return i2c_smbus_read_word_data(client, reg);
+}
+
+static const struct ad_dpot_bus_ops bops = {
+	.read_d8	= read_d8,
+	.read_r8d8	= read_r8d8,
+	.read_r8d16	= read_r8d16,
+	.write_d8	= write_d8,
+	.write_r8d8	= write_r8d8,
+	.write_r8d16	= write_r8d16,
+};
+
+static int __devinit ad_dpot_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct ad_dpot_bus_data bdata = {
+		.client = client,
+		.bops = &bops,
+	};
+
+	struct ad_dpot_id dpot_id = {
+		.name = (char *) &id->name,
+		.devid = id->driver_data,
+	};
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+		return -EIO;
+	}
+
+	return ad_dpot_probe(&client->dev, &bdata, &dpot_id);
+}
+
+static int __devexit ad_dpot_i2c_remove(struct i2c_client *client)
+{
+	return ad_dpot_remove(&client->dev);
+}
+
+static const struct i2c_device_id ad_dpot_id[] = {
+	{"ad5258", AD5258_ID},
+	{"ad5259", AD5259_ID},
+	{"ad5251", AD5251_ID},
+	{"ad5252", AD5252_ID},
+	{"ad5253", AD5253_ID},
+	{"ad5254", AD5254_ID},
+	{"ad5255", AD5255_ID},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ad_dpot_id);
+
+static struct i2c_driver ad_dpot_i2c_driver = {
+	.driver = {
+		.name	= "ad_dpot",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad_dpot_i2c_probe,
+	.remove		= __devexit_p(ad_dpot_i2c_remove),
+	.id_table	= ad_dpot_id,
+};
+
+static int __init ad_dpot_i2c_init(void)
+{
+	return i2c_add_driver(&ad_dpot_i2c_driver);
+}
+module_init(ad_dpot_i2c_init);
+
+static void __exit ad_dpot_i2c_exit(void)
+{
+	i2c_del_driver(&ad_dpot_i2c_driver);
+}
+module_exit(ad_dpot_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("digital potentiometer I2C bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:ad_dpot");

drivers/misc/ad525x_dpot-spi.c

+/*
+ * Driver for the Analog Devices digital potentiometers (SPI bus)
+ *
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include "ad525x_dpot.h"
+
+static const struct ad_dpot_id ad_dpot_spi_devlist[] = {
+	{.name = "ad5160", .devid = AD5160_ID},
+	{.name = "ad5161", .devid = AD5161_ID},
+	{.name = "ad5162", .devid = AD5162_ID},
+	{.name = "ad5165", .devid = AD5165_ID},
+	{.name = "ad5200", .devid = AD5200_ID},
+	{.name = "ad5201", .devid = AD5201_ID},
+	{.name = "ad5203", .devid = AD5203_ID},
+	{.name = "ad5204", .devid = AD5204_ID},
+	{.name = "ad5206", .devid = AD5206_ID},
+	{.name = "ad5207", .devid = AD5207_ID},
+	{.name = "ad5231", .devid = AD5231_ID},
+	{.name = "ad5232", .devid = AD5232_ID},
+	{.name = "ad5233", .devid = AD5233_ID},
+	{.name = "ad5235", .devid = AD5235_ID},
+	{.name = "ad5260", .devid = AD5260_ID},
+	{.name = "ad5262", .devid = AD5262_ID},
+	{.name = "ad5263", .devid = AD5263_ID},
+	{.name = "ad5290", .devid = AD5290_ID},
+	{.name = "ad5291", .devid = AD5291_ID},
+	{.name = "ad5292", .devid = AD5292_ID},
+	{.name = "ad5293", .devid = AD5293_ID},
+	{.name = "ad7376", .devid = AD7376_ID},
+	{.name = "ad8400", .devid = AD8400_ID},
+	{.name = "ad8402", .devid = AD8402_ID},
+	{.name = "ad8403", .devid = AD8403_ID},
+	{.name = "adn2850", .devid = ADN2850_ID},
+	{}
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* SPI bus functions */
+static int write8(void *client, u8 val)
+{
+	u8 data = val;
+	return spi_write(client, &data, 1);
+}
+
+static int write16(void *client, u8 reg, u8 val)
+{
+	u8 data[2] = {reg, val};
+	return spi_write(client, data, 1);
+}
+
+static int write24(void *client, u8 reg, u16 val)
+{
+	u8 data[3] = {reg, val >> 8, val};
+	return spi_write(client, data, 1);
+}
+
+static int read8(void *client)
+{
+	int ret;
+	u8 data;
+	ret = spi_read(client, &data, 1);
+	if (ret < 0)
+		return ret;
+
+	return data;
+}
+
+static int read16(void *client, u8 reg)
+{
+	int ret;
+	u8 buf_rx[2];
+
+	write16(client, reg, 0);
+	ret = spi_read(client, buf_rx, 2);
+	if (ret < 0)
+		return ret;
+
+	return (buf_rx[0] << 8) |  buf_rx[1];
+}
+
+static int read24(void *client, u8 reg)
+{
+	int ret;
+	u8 buf_rx[3];
+
+	write24(client, reg, 0);
+	ret = spi_read(client, buf_rx, 3);
+	if (ret < 0)
+		return ret;
+
+	return (buf_rx[1] << 8) |  buf_rx[2];
+}
+
+static const struct ad_dpot_bus_ops bops = {
+	.read_d8	= read8,
+	.read_r8d8	= read16,
+	.read_r8d16	= read24,
+	.write_d8	= write8,
+	.write_r8d8	= write16,
+	.write_r8d16	= write24,
+};
+
+static const struct ad_dpot_id *dpot_match_id(const struct ad_dpot_id *id,
+						char *name)
+{
+	while (id->name && id->name[0]) {
+		if (strcmp(name, id->name) == 0)
+			return id;
+		id++;
+	}
+	return NULL;
+}
+
+static int __devinit ad_dpot_spi_probe(struct spi_device *spi)
+{
+	char *name = spi->dev.platform_data;
+	const struct ad_dpot_id *dpot_id;
+
+	struct ad_dpot_bus_data bdata = {
+		.client = spi,
+		.bops = &bops,
+	};
+
+	dpot_id = dpot_match_id(ad_dpot_spi_devlist, name);
+
+	if (dpot_id == NULL) {
+		dev_err(&spi->dev, "%s not in supported device list", name);
+		return -ENODEV;
+	}
+
+	return ad_dpot_probe(&spi->dev, &bdata, dpot_id);
+}
+
+static int __devexit ad_dpot_spi_remove(struct spi_device *spi)
+{
+	return ad_dpot_remove(&spi->dev);
+}
+
+static struct spi_driver ad_dpot_spi_driver = {
+	.driver = {
+		.name	= "ad_dpot",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad_dpot_spi_probe,
+	.remove		= __devexit_p(ad_dpot_spi_remove),
+};
+
+static int __init ad_dpot_spi_init(void)
+{
+	return spi_register_driver(&ad_dpot_spi_driver);
+}
+module_init(ad_dpot_spi_init);
+
+static void __exit ad_dpot_spi_exit(void)
+{
+	spi_unregister_driver(&ad_dpot_spi_driver);
+}
+module_exit(ad_dpot_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("digital potentiometer SPI bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad_dpot");

drivers/misc/ad525x_dpot.h

+/*
+ * Driver for the Analog Devices digital potentiometers
+ *
+ * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD_DPOT_H_
+#define _AD_DPOT_H_
+
+#include <linux/types.h>
+
+#define DPOT_CONF(features, wipers, max_pos, uid) \
+		(((features) << 18) | (((wipers) & 0xFF) << 10) | \
+		((max_pos & 0xF) << 6) | (uid & 0x3F))
+
+#define DPOT_UID(conf) (conf & 0x3F)
+#define DPOT_MAX_POS(conf) ((conf >> 6) & 0xF)
+#define DPOT_WIPERS(conf) ((conf >> 10) & 0xFF)
+#define DPOT_FEAT(conf) (conf >> 18)
+
+#define BRDAC0	(1 << 0)
+#define BRDAC1	(1 << 1)
+#define BRDAC2	(1 << 2)
+#define BRDAC3	(1 << 3)
+#define BRDAC4	(1 << 4)
+#define BRDAC5	(1 << 5)
+
+#define F_CMD_INC		(1 << 0)	/* Features INC/DEC ALL, 6dB */
+#define F_CMD_EEP		(1 << 1)	/* Features EEPROM */
+#define F_CMD_TOL		(1 << 2)	/* RDACS are Read/Write + Tolerance REG */
+#define F_RDACS_RW		(1 << 3)	/* RDACS are Read/Write + Tolerance REG */
+#define F_RDACS_WONLY		(1 << 4)	/* RDACS are Write only */
+#define F_AD_APPDATA		(1 << 5)	/* RDAC Address append to data */
+#define F_SPI_8BIT		(1 << 6)	/* All SPI XFERS are 8-bit */
+#define F_SPI_16BIT		(1 << 7)	/* All SPI XFERS are 16-bit */
+#define F_SPI_24BIT		(1 << 8)	/* All SPI XFERS are 24-bit */
+
+#define F_RDACS_RW_TOL	(F_RDACS_RW | F_CMD_EEP | F_CMD_TOL)
+#define F_RDACS_RW_EEP	(F_RDACS_RW | F_CMD_EEP)
+#define F_SPI		(F_SPI_8BIT | F_SPI_16BIT | F_SPI_24BIT)
+
+enum dpot_devid {
+	AD5258_ID = DPOT_CONF(F_RDACS_RW_TOL, BRDAC0, 6, 0), /* I2C */
+	AD5259_ID = DPOT_CONF(F_RDACS_RW_TOL, BRDAC0, 8, 1),
+	AD5251_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+			BRDAC0 | BRDAC3, 6, 2),
+	AD5252_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+			BRDAC0 | BRDAC3, 8, 3),
+	AD5253_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 6, 4),
+	AD5254_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 8, 5),
+	AD5255_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
+			BRDAC0 | BRDAC1 | BRDAC2, 9, 6),
+	AD5160_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 7), /* SPI */
+	AD5161_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 8),
+	AD5162_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1, 8, 9),
+	AD5165_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 10),
+	AD5200_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 11),
+	AD5201_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 5, 12),
+	AD5203_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 6, 13),
+	AD5204_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 8, 14),
+	AD5206_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3 | BRDAC4 | BRDAC5,
+			8, 15),
+	AD5207_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1, 8, 16),
+	AD5231_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_24BIT,
+			BRDAC0, 10, 17),
+	AD5232_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_16BIT,
+			BRDAC0 | BRDAC1, 8, 18),
+	AD5233_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_16BIT,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 6, 19),
+	AD5235_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_24BIT,
+			BRDAC0 | BRDAC1, 10, 20),
+	AD5260_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 21),
+	AD5262_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1, 8, 22),
+	AD5263_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1 | BRDAC2 | BRDAC3, 8, 23),
+	AD5290_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 24),
+	AD5291_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 8, 25),
+	AD5292_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 26),
+	AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27),
+	AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 7, 28),
+	AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+			BRDAC0, 8, 29),
+	AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1, 8, 30),
+	AD8403_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
+			BRDAC0 | BRDAC1 | BRDAC2, 8, 31),
+	ADN2850_ID = DPOT_CONF(F_RDACS_RW_EEP | F_CMD_INC | F_SPI_24BIT,
+			BRDAC0 | BRDAC1, 10, 32),
+};
+
+#define DPOT_RDAC0		0
+#define DPOT_RDAC1		1
+#define DPOT_RDAC2		2
+#define DPOT_RDAC3		3
+#define DPOT_RDAC4		4
+#define DPOT_RDAC5		5
+
+#define DPOT_RDAC_MASK		0x1F
+
+#define DPOT_REG_TOL		0x18
+#define DPOT_TOL_RDAC0		(DPOT_REG_TOL | DPOT_RDAC0)
+#define DPOT_TOL_RDAC1		(DPOT_REG_TOL | DPOT_RDAC1)
+#define DPOT_TOL_RDAC2		(DPOT_REG_TOL | DPOT_RDAC2)
+#define DPOT_TOL_RDAC3		(DPOT_REG_TOL | DPOT_RDAC3)
+#define DPOT_TOL_RDAC4		(DPOT_REG_TOL | DPOT_RDAC4)
+#define DPOT_TOL_RDAC5		(DPOT_REG_TOL | DPOT_RDAC5)
+
+/* RDAC-to-EEPROM Interface Commands */
+#define DPOT_ADDR_RDAC		(0x00 << 5)
+#define DPOT_ADDR_EEPROM	(0x01 << 5)
+#define DPOT_ADDR_CMD		(0x80)
+
+#define DPOT_DEC_ALL_6DB	(DPOT_ADDR_CMD | (0x4 << 3))
+#define DPOT_INC_ALL_6DB	(DPOT_ADDR_CMD | (0x9 << 3))
+#define DPOT_DEC_ALL		(DPOT_ADDR_CMD | (0x6 << 3))
+#define DPOT_INC_ALL		(DPOT_ADDR_CMD | (0xB << 3))
+
+#define DPOT_SPI_RDAC		0xB0
+#define DPOT_SPI_EEPROM		0x30
+#define DPOT_SPI_READ_RDAC	0xA0
+#define DPOT_SPI_READ_EEPROM	0x90
+#define DPOT_SPI_DEC_ALL_6DB	0x50
+#define DPOT_SPI_INC_ALL_6DB	0xD0
+#define DPOT_SPI_DEC_ALL	0x70
+#define DPOT_SPI_INC_ALL	0xF0
+
+/* AD5291/2/3 use special commands */
+#define DPOT_AD5291_RDAC	0x01
+#define DPOT_AD5291_READ_RDAC	0x02
+
+struct dpot_data;
+
+struct ad_dpot_bus_ops {
+	int (*read_d8) (void *client);
+	int (*read_r8d8) (void *client, u8 reg);
+	int (*read_r8d16) (void *client, u8 reg);
+	int (*write_d8) (void *client, u8 val);
+	int (*write_r8d8) (void *client, u8 reg, u8 val);
+	int (*write_r8d16) (void *client, u8 reg, u16 val);
+};
+
+struct ad_dpot_bus_data {
+	void *client;
+	const struct ad_dpot_bus_ops *bops;
+};
+
+struct ad_dpot_id {
+	char *name;
+	unsigned long devid;
+};
+
+int ad_dpot_probe(struct device *dev, struct ad_dpot_bus_data *bdata, const struct ad_dpot_id *id);
+int ad_dpot_remove(struct device *dev);
+
+#endif