Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-09-18

This series contains updates to ixgbe and ixgbevf.

Ethan Zhao cleans up ixgbe and ixgbevf by removing bd_number from the
adapter struct because it is not longer useful.

Mark fixes ixgbe where if a hardware transmit timestamp is requested,
an uninitialized workqueue entry may be scheduled.  Added a check for
a PTP clock to avoid that.

Jacob provides a number of cleanups for ixgbe.  Since we may call
ixgbe_acquire_msix_vectors() prior to registering our netdevice, we
should not use the netdevice specific printk and use e_dev_warn()
instead.  Similar to how ixgbevf handles acquiring MSI-X vectors, we
can return an error code instead of relying on the flag being set.
This makes it more clear that we have failed to setup MSI-X mode and
will make it easier to consolidate MSI-X related code into a single
function.  In the case of disabling DCB, it is not an error since we
still can function, we just have to let the user know.  So use
e_dev_warn() instead of e_err().  Added warnings for other features
that are disabled when we are without MSI-X support.  Cleanup flags
that are no longer used or needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/ixgbe/ixgbe.h

@@ -611,9 +611,7 @@ struct ixgbe_adapter {
 	 * thus the additional *_CAPABLE flags.
 	 */
 	u32 flags;
-#define IXGBE_FLAG_MSI_CAPABLE                  (u32)(1 << 0)
 #define IXGBE_FLAG_MSI_ENABLED                  (u32)(1 << 1)
-#define IXGBE_FLAG_MSIX_CAPABLE                 (u32)(1 << 2)
 #define IXGBE_FLAG_MSIX_ENABLED                 (u32)(1 << 3)
 #define IXGBE_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 4)
 #define IXGBE_FLAG_RX_PS_CAPABLE                (u32)(1 << 5)
@@ -728,8 +726,6 @@ struct ixgbe_adapter {
 	u8 __iomem *io_addr; /* Mainly for iounmap use */
 	u32 wol;
 
-	u16 bd_number;
-
 	u16 eeprom_verh;
 	u16 eeprom_verl;
 	u16 eeprom_cap;

drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c

@@ -696,46 +696,83 @@ static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
 	ixgbe_set_rss_queues(adapter);
 }
 
-static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
-				       int vectors)
+/**
+ * ixgbe_acquire_msix_vectors - acquire MSI-X vectors
+ * @adapter: board private structure
+ *
+ * Attempts to acquire a suitable range of MSI-X vector interrupts. Will
+ * return a negative error code if unable to acquire MSI-X vectors for any
+ * reason.
+ */
+static int ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter)
 {
-	int vector_threshold;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, vectors, vector_threshold;
+
+	/* We start by asking for one vector per queue pair */
+	vectors = max(adapter->num_rx_queues, adapter->num_tx_queues);
 
-	/* We'll want at least 2 (vector_threshold):
-	 * 1) TxQ[0] + RxQ[0] handler
-	 * 2) Other (Link Status Change, etc.)
+	/* It is easy to be greedy for MSI-X vectors. However, it really
+	 * doesn't do much good if we have a lot more vectors than CPUs. We'll
+	 * be somewhat conservative and only ask for (roughly) the same number
+	 * of vectors as there are CPUs.
 	 */
-	vector_threshold = MIN_MSIX_COUNT;
+	vectors = min_t(int, vectors, num_online_cpus());
 
-	/*
-	 * The more we get, the more we will assign to Tx/Rx Cleanup
-	 * for the separate queues...where Rx Cleanup >= Tx Cleanup.
-	 * Right now, we simply care about how many we'll get; we'll
-	 * set them up later while requesting irq's.
+	/* Some vectors are necessary for non-queue interrupts */
+	vectors += NON_Q_VECTORS;
+
+	/* Hardware can only support a maximum of hw.mac->max_msix_vectors.
+	 * With features such as RSS and VMDq, we can easily surpass the
+	 * number of Rx and Tx descriptor queues supported by our device.
+	 * Thus, we cap the maximum in the rare cases where the CPU count also
+	 * exceeds our vector limit
 	 */
+	vectors = min_t(int, vectors, hw->mac.max_msix_vectors);
+
+	/* We want a minimum of two MSI-X vectors for (1) a TxQ[0] + RxQ[0]
+	 * handler, and (2) an Other (Link Status Change, etc.) handler.
+	 */
+	vector_threshold = MIN_MSIX_COUNT;
+
+	adapter->msix_entries = kcalloc(vectors,
+					sizeof(struct msix_entry),
+					GFP_KERNEL);
+	if (!adapter->msix_entries)
+		return -ENOMEM;
+
+	for (i = 0; i < vectors; i++)
+		adapter->msix_entries[i].entry = i;
+
 	vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
 					vector_threshold, vectors);
 
 	if (vectors < 0) {
-		/* Can't allocate enough MSI-X interrupts?  Oh well.
-		 * This just means we'll go with either a single MSI
-		 * vector or fall back to legacy interrupts.
+		/* A negative count of allocated vectors indicates an error in
+		 * acquiring within the specified range of MSI-X vectors
 		 */
-		netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
-			     "Unable to allocate MSI-X interrupts\n");
+		e_dev_warn("Failed to allocate MSI-X interrupts. Err: %d\n",
+			   vectors);
+
 		adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
-	} else {
-		adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
-		/*
-		 * Adjust for only the vectors we'll use, which is minimum
-		 * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
-		 * vectors we were allocated.
-		 */
-		vectors -= NON_Q_VECTORS;
-		adapter->num_q_vectors = min(vectors, adapter->max_q_vectors);
+
+		return vectors;
 	}
+
+	/* we successfully allocated some number of vectors within our
+	 * requested range.
+	 */
+	adapter->flags |= IXGBE_FLAG_MSIX_ENABLED;
+
+	/* Adjust for only the vectors we'll use, which is minimum
+	 * of max_q_vectors, or the number of vectors we were allocated.
+	 */
+	vectors -= NON_Q_VECTORS;
+	adapter->num_q_vectors = min_t(int, vectors, adapter->max_q_vectors);
+
+	return 0;
 }
 
 static void ixgbe_add_ring(struct ixgbe_ring *ring,
@@ -1054,51 +1091,20 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
  **/
 static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_hw *hw = &adapter->hw;
-	int vector, v_budget, err;
-
-	/*
-	 * It's easy to be greedy for MSI-X vectors, but it really
-	 * doesn't do us much good if we have a lot more vectors
-	 * than CPU's.  So let's be conservative and only ask for
-	 * (roughly) the same number of vectors as there are CPU's.
-	 * The default is to use pairs of vectors.
-	 */
-	v_budget = max(adapter->num_rx_queues, adapter->num_tx_queues);
-	v_budget = min_t(int, v_budget, num_online_cpus());
-	v_budget += NON_Q_VECTORS;
-
-	/*
-	 * At the same time, hardware can only support a maximum of
-	 * hw.mac->max_msix_vectors vectors.  With features
-	 * such as RSS and VMDq, we can easily surpass the number of Rx and Tx
-	 * descriptor queues supported by our device.  Thus, we cap it off in
-	 * those rare cases where the cpu count also exceeds our vector limit.
-	 */
-	v_budget = min_t(int, v_budget, hw->mac.max_msix_vectors);
-
-	/* A failure in MSI-X entry allocation isn't fatal, but it does
-	 * mean we disable MSI-X capabilities of the adapter. */
-	adapter->msix_entries = kcalloc(v_budget,
-					sizeof(struct msix_entry), GFP_KERNEL);
-	if (adapter->msix_entries) {
-		for (vector = 0; vector < v_budget; vector++)
-			adapter->msix_entries[vector].entry = vector;
-
-		ixgbe_acquire_msix_vectors(adapter, v_budget);
+	int err;
 
-		if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
-			return;
-	}
+	/* We will try to get MSI-X interrupts first */
+	if (!ixgbe_acquire_msix_vectors(adapter))
+		return;
 
 	/* At this point, we do not have MSI-X capabilities. We need to
 	 * reconfigure or disable various features which require MSI-X
 	 * capability.
 	 */
 
-	/* disable DCB if number of TCs exceeds 1 */
+	/* Disable DCB unless we only have a single traffic class */
 	if (netdev_get_num_tc(adapter->netdev) > 1) {
-		e_err(probe, "num TCs exceeds number of queues - disabling DCB\n");
+		e_dev_warn("Number of DCB TCs exceeds number of available queues. Disabling DCB support.\n");
 		netdev_reset_tc(adapter->netdev);
 
 		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
@@ -1108,13 +1114,16 @@ static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 		adapter->temp_dcb_cfg.pfc_mode_enable = false;
 		adapter->dcb_cfg.pfc_mode_enable = false;
 	}
+
 	adapter->dcb_cfg.num_tcs.pg_tcs = 1;
 	adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
 
-	/* disable SR-IOV */
+	/* Disable SR-IOV support */
+	e_dev_warn("Disabling SR-IOV support\n");
 	ixgbe_disable_sriov(adapter);
 
-	/* disable RSS */
+	/* Disable RSS */
+	e_dev_warn("Disabling RSS support\n");
 	adapter->ring_feature[RING_F_RSS].limit = 1;
 
 	/* recalculate number of queues now that many features have been
@@ -1124,13 +1133,11 @@ static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	adapter->num_q_vectors = 1;
 
 	err = pci_enable_msi(adapter->pdev);
-	if (err) {
-		netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
-			     "Unable to allocate MSI interrupt, falling back to legacy.  Error: %d\n",
-			     err);
-		return;
-	}
-	adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
+	if (err)
+		e_dev_warn("Failed to allocate MSI interrupt, falling back to legacy. Error: %d\n",
+			   err);
+	else
+		adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
 }
 
 /**

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -7108,9 +7108,10 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		tx_flags |= IXGBE_TX_FLAGS_SW_VLAN;
 	}
 
-	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
-		     !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS,
-					    &adapter->state))) {
+	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+	    adapter->ptp_clock &&
+	    !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS,
+				   &adapter->state)) {
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 		tx_flags |= IXGBE_TX_FLAGS_TSTAMP;
 
@@ -7981,7 +7982,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ixgbe_adapter *adapter = NULL;
 	struct ixgbe_hw *hw;
 	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
-	static int cards_found;
 	int i, err, pci_using_dac, expected_gts;
 	unsigned int indices = MAX_TX_QUEUES;
 	u8 part_str[IXGBE_PBANUM_LENGTH];
@@ -8067,8 +8067,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->watchdog_timeo = 5 * HZ;
 	strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
 
-	adapter->bd_number = cards_found;
-
 	/* Setup hw api */
 	memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
 	hw->mac.type  = ii->mac;
@@ -8352,7 +8350,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ixgbe_add_sanmac_netdev(netdev);
 
 	e_dev_info("%s\n", ixgbe_default_device_descr);
-	cards_found++;
 
 #ifdef CONFIG_IXGBE_HWMON
 	if (ixgbe_sysfs_init(adapter))

drivers/net/ethernet/intel/ixgbevf/ixgbevf.h

@@ -385,7 +385,6 @@ struct ixgbevf_adapter {
 	/* structs defined in ixgbe_vf.h */
 	struct ixgbe_hw hw;
 	u16 msg_enable;
-	u16 bd_number;
 	/* Interrupt Throttle Rate */
 	u32 eitr_param;
 

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

@@ -3464,7 +3464,6 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ixgbevf_adapter *adapter = NULL;
 	struct ixgbe_hw *hw = NULL;
 	const struct ixgbevf_info *ii = ixgbevf_info_tbl[ent->driver_data];
-	static int cards_found;
 	int err, pci_using_dac;
 
 	err = pci_enable_device(pdev);
@@ -3525,8 +3524,6 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ixgbevf_assign_netdev_ops(netdev);
 
-	adapter->bd_number = cards_found;
-
 	/* Setup hw api */
 	memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
 	hw->mac.type  = ii->mac;
@@ -3601,7 +3598,6 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hw_dbg(hw, "MAC: %d\n", hw->mac.type);
 
 	hw_dbg(hw, "Intel(R) 82599 Virtual Function\n");
-	cards_found++;
 	return 0;
 
 err_register: