Commit 6c76dd0c authored by Sinan Kaya's avatar Sinan Kaya Committed by Greg Kroah-Hartman

ACPI/PCI: pci_link: penalize SCI correctly

commit f1caa61d upstream.

Ondrej reported that IRQs stopped working in v4.7 on several
platforms.  A typical scenario, from Ondrej's VT82C694X/694X, is:

ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: No IRQ available for PCI Interrupt Link [LNKA]
8139too 0000:00:0f.0: PCI INT A: no GSI

We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already
active at IRQ 11. In that case, acpi_pci_link_allocate() only tries
to use the active IRQ (IRQ 11) which also happens to be the SCI.

We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but
irq_get_trigger_type(11) returns something other than
IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS
instead, which makes acpi_pci_link_allocate() assume the IRQ isn't
available and give up.

Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ,
trigger, and polarity directly and we don't have to depend on
irq_get_trigger_type().

Fixes: 103544d8 (ACPI,PCI,IRQ: reduce resource requirements)
Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.orgReported-by: default avatarOndrej Zary <linux@rainbow-software.org>
Acked-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarSinan Kaya <okaya@codeaurora.org>
Tested-by: default avatarJonathan Liu <net147@gmail.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 86c71166
......@@ -453,6 +453,7 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
acpi_penalize_sci_irq(bus_irq, trigger, polarity);
/*
* stash over-ride to indicate we've been here
......
......@@ -87,6 +87,7 @@ struct acpi_pci_link {
static LIST_HEAD(acpi_link_list);
static DEFINE_MUTEX(acpi_link_lock);
static int sci_irq = -1, sci_penalty;
/* --------------------------------------------------------------------------
PCI Link Device Management
......@@ -496,25 +497,13 @@ static int acpi_irq_get_penalty(int irq)
{
int penalty = 0;
/*
* Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict
* with PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be
* use for PCI IRQs.
*/
if (irq == acpi_gbl_FADT.sci_interrupt) {
u32 type = irq_get_trigger_type(irq) & IRQ_TYPE_SENSE_MASK;
if (type != IRQ_TYPE_LEVEL_LOW)
penalty += PIRQ_PENALTY_ISA_ALWAYS;
else
penalty += PIRQ_PENALTY_PCI_USING;
}
if (irq == sci_irq)
penalty += sci_penalty;
if (irq < ACPI_MAX_ISA_IRQS)
return penalty + acpi_isa_irq_penalty[irq];
penalty += acpi_irq_pci_sharing_penalty(irq);
return penalty;
return penalty + acpi_irq_pci_sharing_penalty(irq);
}
int __init acpi_irq_penalty_init(void)
......@@ -881,6 +870,17 @@ bool acpi_isa_irq_available(int irq)
acpi_irq_get_penalty(irq) < PIRQ_PENALTY_ISA_ALWAYS);
}
void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
{
sci_irq = irq;
if (trigger == ACPI_MADT_TRIGGER_LEVEL &&
polarity == ACPI_MADT_POLARITY_ACTIVE_LOW)
sci_penalty = PIRQ_PENALTY_PCI_USING;
else
sci_penalty = PIRQ_PENALTY_ISA_ALWAYS;
}
/*
* Over-ride default table to reserve additional IRQs for use by ISA
* e.g. acpi_irq_isa=5
......
......@@ -318,6 +318,7 @@ struct pci_dev;
int acpi_pci_irq_enable (struct pci_dev *dev);
void acpi_penalize_isa_irq(int irq, int active);
bool acpi_isa_irq_available(int irq);
void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
void acpi_pci_irq_disable (struct pci_dev *dev);
extern int ec_read(u8 addr, u8 *val);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment