Commit 6cffcc23 authored by Michael Krufky's avatar Michael Krufky Committed by Linus Torvalds

[PATCH] v4l: 896: rename BTTV_FOO --> BTTV_BOARD_FOO

Adapt to changes in v4l tree: rename BTTV_FOO --> BTTV_BOARD_FOO
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 7418f346
......@@ -600,8 +600,8 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
struct dst_state* state = NULL;
switch(type) {
#ifdef BTTV_DVICO_DVBT_LITE
case BTTV_DVICO_DVBT_LITE:
#ifdef BTTV_BOARD_DVICO_DVBT_LITE
case BTTV_BOARD_DVICO_DVBT_LITE:
card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter);
if (card->fe != NULL) {
card->fe->ops->info.frequency_min = 174000000;
......@@ -610,8 +610,8 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
break;
#endif
#ifdef BTTV_DVICO_FUSIONHDTV_5_LITE
case BTTV_DVICO_FUSIONHDTV_5_LITE:
#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
lgdt330x_reset(card);
card->fe = lgdt330x_attach(&tdvs_tua6034_config, card->i2c_adapter);
if (card->fe != NULL)
......@@ -619,10 +619,10 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
break;
#endif
#ifdef BTTV_TWINHAN_VP3021
case BTTV_TWINHAN_VP3021:
#ifdef BTTV_BOARD_TWINHAN_VP3021
case BTTV_BOARD_TWINHAN_VP3021:
#else
case BTTV_NEBULA_DIGITV:
case BTTV_BOARD_NEBULA_DIGITV:
#endif
/*
* It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
......@@ -645,11 +645,11 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n");
break;
case BTTV_AVDVBT_761:
case BTTV_BOARD_AVDVBT_761:
card->fe = sp887x_attach(&microtune_mt7202dtf_config, card->i2c_adapter);
break;
case BTTV_AVDVBT_771:
case BTTV_BOARD_AVDVBT_771:
card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
if (card->fe != NULL) {
card->fe->ops->info.frequency_min = 174000000;
......@@ -657,7 +657,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
}
break;
case BTTV_TWINHAN_DST:
case BTTV_BOARD_TWINHAN_DST:
/* DST is not a frontend driver !!! */
state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
/* Setup the Card */
......@@ -678,11 +678,11 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
ret = dst_ca_attach(state, &card->dvb_adapter);
break;
case BTTV_PINNACLESAT:
case BTTV_BOARD_PINNACLESAT:
card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter);
break;
case BTTV_PC_HDTV:
case BTTV_BOARD_PC_HDTV:
card->fe = or51211_attach(&or51211_config, card->i2c_adapter);
break;
}
......@@ -804,7 +804,7 @@ static int dvb_bt8xx_probe(struct device *dev)
card->i2c_adapter = &sub->core->i2c_adap;
switch(sub->core->type) {
case BTTV_PINNACLESAT:
case BTTV_BOARD_PINNACLESAT:
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
......@@ -812,8 +812,8 @@ static int dvb_bt8xx_probe(struct device *dev)
card->irq_err_ignore = 0;
break;
#ifdef BTTV_DVICO_DVBT_LITE
case BTTV_DVICO_DVBT_LITE:
#ifdef BTTV_BOARD_DVICO_DVBT_LITE
case BTTV_BOARD_DVICO_DVBT_LITE:
#endif
card->gpio_mode = 0x0400C060;
card->op_sync_orin = 0;
......@@ -823,34 +823,34 @@ static int dvb_bt8xx_probe(struct device *dev)
* DA_APP(parallel) */
break;
#ifdef BTTV_DVICO_FUSIONHDTV_5_LITE
case BTTV_DVICO_FUSIONHDTV_5_LITE:
#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
#endif
card->gpio_mode = 0x0400c060;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
break;
#ifdef BTTV_TWINHAN_VP3021
case BTTV_TWINHAN_VP3021:
#ifdef BTTV_BOARD_TWINHAN_VP3021
case BTTV_BOARD_TWINHAN_VP3021:
#else
case BTTV_NEBULA_DIGITV:
case BTTV_BOARD_NEBULA_DIGITV:
#endif
case BTTV_AVDVBT_761:
case BTTV_BOARD_AVDVBT_761:
card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
/* A_PWRDN DA_SBR DA_APP (high speed serial) */
break;
case BTTV_AVDVBT_771: //case 0x07711461:
case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
card->gpio_mode = 0x0400402B;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = 0;
/* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
break;
case BTTV_TWINHAN_DST:
case BTTV_BOARD_TWINHAN_DST:
card->gpio_mode = 0x2204f2c;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
......@@ -868,7 +868,7 @@ static int dvb_bt8xx_probe(struct device *dev)
* RISC+FIFO ENABLE */
break;
case BTTV_PC_HDTV:
case BTTV_BOARD_PC_HDTV:
card->gpio_mode = 0x0100EC7B;
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment