Commit 6df4aff9 authored by Hauke Mehrtens's avatar Hauke Mehrtens Committed by David S. Miller

bgmac: add support for Northstar SoC (BCM4707, BCM53018)

This adds support for the Northstar SoC. This SoC does not have a PMU in
bcma and no register on it should be called. In addition it support 2.5
GBit/s Ethernet to the PHY.

This GMAC core is not fully working there are still problems with the
DMA controller.
Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 622a521f
......@@ -848,6 +848,9 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
case SPEED_1000:
set |= BGMAC_CMDCFG_ES_1000;
break;
case SPEED_2500:
set |= BGMAC_CMDCFG_ES_2500;
break;
default:
bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
}
......@@ -860,12 +863,26 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
static void bgmac_miiconfig(struct bgmac *bgmac)
{
u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
BGMAC_DS_MM_SHIFT;
if (imode == 0 || imode == 1) {
bgmac->mac_speed = SPEED_100;
struct bcma_device *core = bgmac->core;
struct bcma_chipinfo *ci = &core->bus->chipinfo;
u8 imode;
if (ci->id == BCMA_CHIP_ID_BCM4707 ||
ci->id == BCMA_CHIP_ID_BCM53018) {
bcma_awrite32(core, BCMA_IOCTL,
bcma_aread32(core, BCMA_IOCTL) | 0x40 |
BGMAC_BCMA_IOCTL_SW_CLKEN);
bgmac->mac_speed = SPEED_2500;
bgmac->mac_duplex = DUPLEX_FULL;
bgmac_mac_speed(bgmac);
} else {
imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) &
BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT;
if (imode == 0 || imode == 1) {
bgmac->mac_speed = SPEED_100;
bgmac->mac_duplex = DUPLEX_FULL;
bgmac_mac_speed(bgmac);
}
}
}
......@@ -875,7 +892,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
struct bcma_device *core = bgmac->core;
struct bcma_bus *bus = core->bus;
struct bcma_chipinfo *ci = &bus->chipinfo;
u32 flags = 0;
u32 flags;
u32 iost;
int i;
......@@ -903,15 +920,21 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
iost &= ~BGMAC_BCMA_IOST_ATTACHED;
if (iost & BGMAC_BCMA_IOST_ATTACHED) {
flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
if (!bgmac->has_robosw)
flags |= BGMAC_BCMA_IOCTL_SW_RESET;
/* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */
if (ci->id != BCMA_CHIP_ID_BCM4707) {
flags = 0;
if (iost & BGMAC_BCMA_IOST_ATTACHED) {
flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
if (!bgmac->has_robosw)
flags |= BGMAC_BCMA_IOCTL_SW_RESET;
}
bcma_core_enable(core, flags);
}
bcma_core_enable(core, flags);
if (core->id.rev > 2) {
/* Request Misc PLL for corerev > 2 */
if (core->id.rev > 2 &&
ci->id != BCMA_CHIP_ID_BCM4707 &&
ci->id != BCMA_CHIP_ID_BCM53018) {
bgmac_set(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
......@@ -1049,12 +1072,16 @@ static void bgmac_enable(struct bgmac *bgmac)
break;
}
rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
mdp = (bp_clk * 128 / 1000) - 3;
rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
if (ci->id != BCMA_CHIP_ID_BCM4707 &&
ci->id != BCMA_CHIP_ID_BCM53018) {
rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
1000000;
mdp = (bp_clk * 128 / 1000) - 3;
rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
}
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
......
......@@ -189,6 +189,7 @@
#define BGMAC_CMDCFG_ES_10 0x00000000
#define BGMAC_CMDCFG_ES_100 0x00000004
#define BGMAC_CMDCFG_ES_1000 0x00000008
#define BGMAC_CMDCFG_ES_2500 0x0000000C
#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */
#define BGMAC_CMDCFG_PAD_EN 0x00000020
#define BGMAC_CMDCFG_CF 0x00000040
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment