[PATCH] irq-flags: consolidate flags for request_irq

The recent interrupt rework introduced bit value conflicts with sparc.
Instead of introducing new architecture flags mess, move the interrupt SA_
flags out of the signal namespace and replace them by interrupt related flags.

This allows to remove the obsolete SA_INTERRUPT flag and clean up the bit
field values.

This patch:

Move the interrupt related SA_ flags out of linux/signal.h and rename them to
IRQF_ .  This moves the interrupt related flags out of the signal namespace
and allows to remove the architecture dependencies.

SA_INTERRUPT is not needed by userspace and glibc so it can be removed safely.

The existing SA_ constants are kept for easy transition and will be
removed after a 6 month grace period.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Jens Axboe <axboe@suse.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>                                 Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Documentation/feature-removal-schedule.txt

@@ -257,3 +257,12 @@ Why:	Code does no longer build since at least 2.6.0,  apparently there is
 Who:	Ralf Baechle <ralf@linux-mips.org>
 
 ---------------------------
+
+What:	Interrupt only SA_* flags
+When:	Januar 2007
+Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
+	out of the signal namespace.
+
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------

include/linux/interrupt.h

@@ -14,6 +14,53 @@
 #include <asm/ptrace.h>
 #include <asm/system.h>
 
+/*
+ * These correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour.  When
+ * requesting an interrupt without specifying a IRQF_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define IRQF_TRIGGER_NONE	0x00000000
+#define IRQF_TRIGGER_RISING	0x00000001
+#define IRQF_TRIGGER_FALLING	0x00000002
+#define IRQF_TRIGGER_HIGH	0x00000004
+#define IRQF_TRIGGER_LOW	0x00000008
+#define IRQF_TRIGGER_MASK	(IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
+				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+#define IRQF_TRIGGER_PROBE	0x00000010
+
+/*
+ * These flags used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * IRQF_DISABLED - keep irqs disabled when calling the action handler
+ * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
+ * IRQF_SHARED - allow sharing the irq among several devices
+ * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
+ * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ */
+#define IRQF_DISABLED		0x00000020
+#define IRQF_SAMPLE_RANDOM	0x00000040
+#define IRQF_SHARED		0x00000080
+#define IRQF_PROBE_SHARED	0x00000100
+#define IRQF_TIMER		0x00000200
+
+/*
+ * Migration helpers. Scheduled for removal in 1/2007
+ * Do not use for new code !
+ */
+#define SA_INTERRUPT		IRQF_DISABLED
+#define SA_SAMPLE_RANDOM	IRQF_SAMPLE_RANDOM
+#define SA_SHIRQ		IRQF_SHARED
+#define SA_PROBEIRQ		IRQF_PROBE_SHARED
+
+#define SA_TRIGGER_LOW		IRQF_TRIGGER_LOW
+#define SA_TRIGGER_HIGH		IRQF_TRIGGER_HIGH
+#define SA_TRIGGER_FALLING	IRQF_TRIGGER_FALLING
+#define SA_TRIGGER_RISING	IRQF_TRIGGER_RISING
+#define SA_TRIGGER_MASK		IRQF_TRIGGER_MASK
+
 struct irqaction {
 	irqreturn_t (*handler)(int, void *, struct pt_regs *);
 	unsigned long flags;

include/linux/irq.h

@@ -24,41 +24,40 @@
 
 /*
  * IRQ line status.
+ *
+ * Bits 0-16 are reserved for the IRQF_* bits in linux/interrupt.h
+ *
+ * IRQ types
  */
-#define IRQ_INPROGRESS	1	/* IRQ handler active - do not enter! */
-#define IRQ_DISABLED	2	/* IRQ disabled - do not enter! */
-#define IRQ_PENDING	4	/* IRQ pending - replay on enable */
-#define IRQ_REPLAY	8	/* IRQ has been replayed but not acked yet */
-#define IRQ_AUTODETECT	16	/* IRQ is being autodetected */
-#define IRQ_WAITING	32	/* IRQ not yet seen - for autodetection */
-#define IRQ_LEVEL	64	/* IRQ level triggered */
-#define IRQ_MASKED	128	/* IRQ masked - shouldn't be seen again */
+#define IRQ_TYPE_NONE		0x00000000	/* Default, unspecified type */
+#define IRQ_TYPE_EDGE_RISING	0x00000001	/* Edge rising type */
+#define IRQ_TYPE_EDGE_FALLING	0x00000002	/* Edge falling type */
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH	0x00000004	/* Level high type */
+#define IRQ_TYPE_LEVEL_LOW	0x00000008	/* Level low type */
+#define IRQ_TYPE_SENSE_MASK	0x0000000f	/* Mask of the above */
+#define IRQ_TYPE_PROBE		0x00000010	/* Probing in progress */
+
+/* Internal flags */
+#define IRQ_INPROGRESS		0x00010000	/* IRQ handler active - do not enter! */
+#define IRQ_DISABLED		0x00020000	/* IRQ disabled - do not enter! */
+#define IRQ_PENDING		0x00040000	/* IRQ pending - replay on enable */
+#define IRQ_REPLAY		0x00080000	/* IRQ has been replayed but not acked yet */
+#define IRQ_AUTODETECT		0x00100000	/* IRQ is being autodetected */
+#define IRQ_WAITING		0x00200000	/* IRQ not yet seen - for autodetection */
+#define IRQ_LEVEL		0x00400000	/* IRQ level triggered */
+#define IRQ_MASKED		0x00800000	/* IRQ masked - shouldn't be seen again */
 #ifdef CONFIG_IRQ_PER_CPU
-# define IRQ_PER_CPU	256	/* IRQ is per CPU */
+# define IRQ_PER_CPU		0x01000000	/* IRQ is per CPU */
 # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
 #else
 # define CHECK_IRQ_PER_CPU(var) 0
 #endif
 
-#define IRQ_NOPROBE	512	/* IRQ is not valid for probing */
-#define IRQ_NOREQUEST	1024	/* IRQ cannot be requested */
-#define IRQ_NOAUTOEN	2048	/* IRQ will not be enabled on request irq */
-#define IRQ_DELAYED_DISABLE \
-			4096	/* IRQ disable (masking) happens delayed. */
-
-/*
- * IRQ types, see also include/linux/interrupt.h
- */
-#define IRQ_TYPE_NONE		0x0000		/* Default, unspecified type */
-#define IRQ_TYPE_EDGE_RISING	0x0001		/* Edge rising type */
-#define IRQ_TYPE_EDGE_FALLING	0x0002		/* Edge falling type */
-#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
-#define IRQ_TYPE_LEVEL_HIGH	0x0004		/* Level high type */
-#define IRQ_TYPE_LEVEL_LOW	0x0008		/* Level low type */
-#define IRQ_TYPE_SENSE_MASK	0x000f		/* Mask of the above */
-#define IRQ_TYPE_SIMPLE		0x0010		/* Simple type */
-#define IRQ_TYPE_PERCPU		0x0020		/* Per CPU type */
-#define IRQ_TYPE_PROBE		0x0040		/* Probing in progress */
+#define IRQ_NOPROBE		0x02000000	/* IRQ is not valid for probing */
+#define IRQ_NOREQUEST		0x04000000	/* IRQ cannot be requested */
+#define IRQ_NOAUTOEN		0x08000000	/* IRQ will not be enabled on request irq */
+#define IRQ_DELAYED_DISABLE	0x10000000	/* IRQ disable (masking) happens delayed. */
 
 struct proc_dir_entry;
 

include/linux/signal.h

@@ -8,32 +8,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- * SA_PROBEIRQ is set by callers when they expect sharing mismatches to occur
- */
-#define SA_SAMPLE_RANDOM	SA_RESTART
-#define SA_SHIRQ		0x04000000
-#define SA_PROBEIRQ		0x08000000
-
-/*
- * As above, these correspond to the IORESOURCE_IRQ_* defines in
- * linux/ioport.h to select the interrupt line behaviour.  When
- * requesting an interrupt without specifying a SA_TRIGGER, the
- * setting should be assumed to be "as already configured", which
- * may be as per machine or firmware initialisation.
- */
-#define SA_TRIGGER_LOW		0x00000008
-#define SA_TRIGGER_HIGH		0x00000004
-#define SA_TRIGGER_FALLING	0x00000002
-#define SA_TRIGGER_RISING	0x00000001
-#define SA_TRIGGER_MASK	(SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
-				 SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
-
 /*
  * Real Time signals may be queued.
  */