Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc fixes from Ben Herrenschmidt:
 "A bit more endian problems found during testing of 3.13 and a few
  other simple fixes and regressions fixes"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix alignment of secondary cpu spin vars
  powerpc: Align p_end
  powernv/eeh: Add buffer for P7IOC hub error data
  powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
  powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
  powerpc: Make unaligned accesses endian-safe for powerpc
  powerpc: Fix bad stack check in exception entry
  powerpc/512x: dts: disable MPC5125 usb module
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)

arch/powerpc/boot/dts/mpc5125twr.dts

@@ -58,7 +58,6 @@ soc@80000000 {
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		#interrupt-cells = <2>;
 		ranges = <0x0 0x80000000 0x400000>;
 		reg = <0x80000000 0x400000>;
 		bus-frequency = <66000000>;	// 66 MHz ips bus
@@ -189,6 +188,10 @@ ioctl@a000 {
 			reg = <0xA000 0x1000>;
 		};
 
+		// disable USB1 port
+		// TODO:
+		// correct pinmux config and fix USB3320 ulpi dependency
+		// before re-enabling it
 		usb@3000 {
 			compatible = "fsl,mpc5121-usb2-dr";
 			reg = <0x3000 0x400>;
@@ -197,6 +200,7 @@ usb@3000 {
 			interrupts = <43 0x8>;
 			dr_mode = "host";
 			phy_type = "ulpi";
+			status = "disabled";
 		};
 
 		// 5125 PSCs are not 52xx or 5121 PSC compatible

arch/powerpc/include/asm/exception-64s.h

@@ -284,7 +284,7 @@ do_kvm_##n:								\
 	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
 	beq-	1f;							   \
 	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
-1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
+1:	cmpdi	cr1,r1,-INT_FRAME_SIZE;	/* check if r1 is in userspace	*/ \
 	blt+	cr1,3f;			/* abort if it is		*/ \
 	li	r1,(n);			/* will be reloaded later	*/ \
 	sth	r1,PACA_TRAP_SAVE(r13);					   \

arch/powerpc/include/asm/unaligned.h

@@ -4,13 +4,18 @@
 #ifdef __KERNEL__
 
 /*
- * The PowerPC can do unaligned accesses itself in big endian mode.
+ * The PowerPC can do unaligned accesses itself based on its endian mode.
  */
 #include <linux/unaligned/access_ok.h>
 #include <linux/unaligned/generic.h>
 
+#ifdef __LITTLE_ENDIAN__
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+#else
 #define get_unaligned	__get_unaligned_be
 #define put_unaligned	__put_unaligned_be
+#endif
 
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_UNALIGNED_H */

arch/powerpc/kernel/head_64.S

@@ -80,6 +80,7 @@ END_FTR_SECTION(0, 1)
 	 * of the function that the cpu should jump to to continue
 	 * initialization.
 	 */
+	.balign 8
 	.globl  __secondary_hold_spinloop
 __secondary_hold_spinloop:
 	.llong	0x0
@@ -470,6 +471,7 @@ _STATIC(__after_prom_start)
 	mtctr	r8
 	bctr
 
+.balign 8
 p_end:	.llong	_end - _stext
 
 4:	/* Now copy the rest of the kernel up to _end */

arch/powerpc/lib/copyuser_64.S

@@ -9,6 +9,14 @@
 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 
+#ifdef __BIG_ENDIAN__
+#define sLd sld		/* Shift towards low-numbered address. */
+#define sHd srd		/* Shift towards high-numbered address. */
+#else
+#define sLd srd		/* Shift towards low-numbered address. */
+#define sHd sld		/* Shift towards high-numbered address. */
+#endif
+
 	.align	7
 _GLOBAL(__copy_tofrom_user)
 BEGIN_FTR_SECTION
@@ -118,10 +126,10 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 
 24:	ld	r9,0(r4)	/* 3+2n loads, 2+2n stores */
 25:	ld	r0,8(r4)
-	sld	r6,r9,r10
+	sLd	r6,r9,r10
 26:	ldu	r9,16(r4)
-	srd	r7,r0,r11
-	sld	r8,r0,r10
+	sHd	r7,r0,r11
+	sLd	r8,r0,r10
 	or	r7,r7,r6
 	blt	cr6,79f
 27:	ld	r0,8(r4)
@@ -129,35 +137,35 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 
 28:	ld	r0,0(r4)	/* 4+2n loads, 3+2n stores */
 29:	ldu	r9,8(r4)
-	sld	r8,r0,r10
+	sLd	r8,r0,r10
 	addi	r3,r3,-8
 	blt	cr6,5f
 30:	ld	r0,8(r4)
-	srd	r12,r9,r11
-	sld	r6,r9,r10
+	sHd	r12,r9,r11
+	sLd	r6,r9,r10
 31:	ldu	r9,16(r4)
 	or	r12,r8,r12
-	srd	r7,r0,r11
-	sld	r8,r0,r10
+	sHd	r7,r0,r11
+	sLd	r8,r0,r10
 	addi	r3,r3,16
 	beq	cr6,78f
 
 1:	or	r7,r7,r6
 32:	ld	r0,8(r4)
 76:	std	r12,8(r3)
-2:	srd	r12,r9,r11
-	sld	r6,r9,r10
+2:	sHd	r12,r9,r11
+	sLd	r6,r9,r10
 33:	ldu	r9,16(r4)
 	or	r12,r8,r12
 77:	stdu	r7,16(r3)
-	srd	r7,r0,r11
-	sld	r8,r0,r10
+	sHd	r7,r0,r11
+	sLd	r8,r0,r10
 	bdnz	1b
 
 78:	std	r12,8(r3)
 	or	r7,r7,r6
 79:	std	r7,16(r3)
-5:	srd	r12,r9,r11
+5:	sHd	r12,r9,r11
 	or	r12,r8,r12
 80:	std	r12,24(r3)
 	bne	6f
@@ -165,23 +173,38 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 	blr
 6:	cmpwi	cr1,r5,8
 	addi	r3,r3,32
-	sld	r9,r9,r10
+	sLd	r9,r9,r10
 	ble	cr1,7f
 34:	ld	r0,8(r4)
-	srd	r7,r0,r11
+	sHd	r7,r0,r11
 	or	r9,r7,r9
 7:
 	bf	cr7*4+1,1f
+#ifdef __BIG_ENDIAN__
 	rotldi	r9,r9,32
+#endif
 94:	stw	r9,0(r3)
+#ifdef __LITTLE_ENDIAN__
+	rotrdi	r9,r9,32
+#endif
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
+#ifdef __BIG_ENDIAN__
 	rotldi	r9,r9,16
+#endif
 95:	sth	r9,0(r3)
+#ifdef __LITTLE_ENDIAN__
+	rotrdi	r9,r9,16
+#endif
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
+#ifdef __BIG_ENDIAN__
 	rotldi	r9,r9,8
+#endif
 96:	stb	r9,0(r3)
+#ifdef __LITTLE_ENDIAN__
+	rotrdi	r9,r9,8
+#endif
 3:	li	r3,0
 	blr
 

arch/powerpc/platforms/powernv/eeh-ioda.c

@@ -36,7 +36,6 @@
 #include "powernv.h"
 #include "pci.h"
 
-static char *hub_diag = NULL;
 static int ioda_eeh_nb_init = 0;
 
 static int ioda_eeh_event(struct notifier_block *nb,
@@ -140,15 +139,6 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 		ioda_eeh_nb_init = 1;
 	}
 
-	/* We needn't HUB diag-data on PHB3 */
-	if (phb->type == PNV_PHB_IODA1 && !hub_diag) {
-		hub_diag = (char *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-		if (!hub_diag) {
-			pr_err("%s: Out of memory !\n", __func__);
-			return -ENOMEM;
-		}
-	}
-
 #ifdef CONFIG_DEBUG_FS
 	if (phb->dbgfs) {
 		debugfs_create_file("err_injct_outbound", 0600,
@@ -633,11 +623,10 @@ static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data)
 static void ioda_eeh_hub_diag(struct pci_controller *hose)
 {
 	struct pnv_phb *phb = hose->private_data;
-	struct OpalIoP7IOCErrorData *data;
+	struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag;
 	long rc;
 
-	data = (struct OpalIoP7IOCErrorData *)ioda_eeh_hub_diag;
-	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, PAGE_SIZE);
+	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
 	if (rc != OPAL_SUCCESS) {
 		pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n",
 			   __func__, phb->hub_id, rc);
@@ -820,14 +809,15 @@ static void ioda_eeh_phb_diag(struct pci_controller *hose)
 	struct OpalIoPhbErrorCommon *common;
 	long rc;
 
-	common = (struct OpalIoPhbErrorCommon *)phb->diag.blob;
-	rc = opal_pci_get_phb_diag_data2(phb->opal_id, common, PAGE_SIZE);
+	rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
+					 PNV_PCI_DIAG_BUF_SIZE);
 	if (rc != OPAL_SUCCESS) {
 		pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
 			    __func__, hose->global_number, rc);
 		return;
 	}
 
+	common = (struct OpalIoPhbErrorCommon *)phb->diag.blob;
 	switch (common->ioType) {
 	case OPAL_PHB_ERROR_DATA_TYPE_P7IOC:
 		ioda_eeh_p7ioc_phb_diag(hose, common);

arch/powerpc/platforms/powernv/pci.h

@@ -172,11 +172,13 @@ struct pnv_phb {
 		} ioda;
 	};
 
-	/* PHB status structure */
+	/* PHB and hub status structure */
 	union {
 		unsigned char			blob[PNV_PCI_DIAG_BUF_SIZE];
 		struct OpalIoP7IOCPhbErrorData	p7ioc;
+		struct OpalIoP7IOCErrorData 	hub_diag;
 	} diag;
+
 };
 
 extern struct pci_ops pnv_pci_ops;