Skip to content

L
linux
Commit 6f299774 authored by Tony Lindgren's avatar Tony Lindgren Committed by Russell King
Browse files
Options

[ARM PATCH] 1854/1: Remove old board specific OMAP files 

Patch from Tony Lindgren

Removes old duplicate board specific files that have been renamed to
board-*.c
parent 308d4fe2
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 383 deletions
arch/arm/mach-omap/innovator1510.c deleted 100644 → 0
View file @ 308d4fe2
/*
* linux/arch/arm/mach-omap/innovator1510.c
*
* Board specific inits for OMAP-1510 Innovator
*
* Copyright (C) 2001 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* Copyright (C) 2002 MontaVista Software, Inc.
*
* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/clocks.h>
#include <asm/arch/gpio.h>
#include <asm/arch/fpga.h>
#include "common.h"
extern int omap_gpio_init(void);
void innovator_init_irq(void)
{
omap_init_irq();
omap_gpio_init();
fpga_init_irq();
}
static struct resource smc91x_resources[] = {
[0] = {
.start = OMAP1510P1_FPGA_ETHR_START, /* Physical */
.end = OMAP1510P1_FPGA_ETHR_START + 16,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = INT_ETHER,
.end = INT_ETHER,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *devices[] __initdata = {
&smc91x_device,
};
static void __init innovator_init(void)
{
if (!machine_is_innovator())
return;
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator_io_desc[] __initdata = {
{ OMAP1510P1_FPGA_BASE, OMAP1510P1_FPGA_START, OMAP1510P1_FPGA_SIZE,
MT_DEVICE },
};
static void __init innovator_map_io(void)
{
omap_map_io();
iotable_init(innovator_io_desc, ARRAY_SIZE(innovator_io_desc));
/* Dump the Innovator FPGA rev early - useful info for support. */
printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
fpga_read(OMAP1510P1_FPGA_REV_HIGH),
fpga_read(OMAP1510P1_FPGA_REV_LOW),
fpga_read(OMAP1510P1_FPGA_BOARD_REV));
}
MACHINE_START(INNOVATOR, "TI-Innovator/OMAP1510")
MAINTAINER("MontaVista Software, Inc.")
BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
BOOT_PARAMS(0x10000100)
MAPIO(innovator_map_io)
INITIRQ(innovator_init_irq)
INIT_MACHINE(innovator_init)
MACHINE_END
arch/arm/mach-omap/innovator1610.c deleted 100644 → 0
View file @ 308d4fe2
/*
* linux/arch/arm/mach-omap/innovator1610.c
*
* This file contains Innovator-specific code.
*
* Copyright (C) 2002 MontaVista Software, Inc.
*
* Copyright (C) 2001 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/irqs.h>
#include "common.h"
void
innovator_init_irq(void)
{
omap_init_irq();
}
static struct resource smc91x_resources[] = {
[0] = {
.start = OMAP1610_ETHR_START, /* Physical */
.end = OMAP1610_ETHR_START + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0, /* Really GPIO 0 */
.end = 0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *devices[] __initdata = {
&smc91x_device,
};
static void __init innovator_init(void)
{
if (!machine_is_innovator())
return;
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc innovator_io_desc[] __initdata = {
{ OMAP1610_ETHR_BASE, OMAP1610_ETHR_START, OMAP1610_ETHR_SIZE,MT_DEVICE },
{ OMAP1610_NOR_FLASH_BASE, OMAP1610_NOR_FLASH_START, OMAP1610_NOR_FLASH_SIZE,
MT_DEVICE },
};
static void __init innovator_map_io(void)
{
omap_map_io();
iotable_init(innovator_io_desc, ARRAY_SIZE(innovator_io_desc));
}
MACHINE_START(INNOVATOR, "TI-Innovator/OMAP1610")
MAINTAINER("MontaVista Software, Inc.")
BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
BOOT_PARAMS(0x10000100)
MAPIO(innovator_map_io)
INITIRQ(innovator_init_irq)
INIT_MACHINE(innovator_init)
MACHINE_END
arch/arm/mach-omap/omap-generic.c deleted 100644 → 0
View file @ 308d4fe2
/*
* linux/arch/arm/mach-omap/generic.c
*
* Modified from innovator.c
*
* Code for generic OMAP board. Should work on many OMAP systems where
* the device drivers take care of all the necessary hardware initialization.
* Do not put any board specific code to this file; create a new machine
* type if you need custom low-level initializations.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/clocks.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include "common.h"
static void __init omap_generic_init_irq(void)
{
omap_init_irq();
}
/*
* Muxes the serial ports on
*/
static void __init omap_early_serial_init(void)
{
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
omap_cfg_reg(UART2_TX);
omap_cfg_reg(UART2_RTS);
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
}
static void __init omap_generic_init(void)
{
if (!machine_is_omap_generic())
return;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
if (cpu_is_omap1510()) {
omap_early_serial_init();
}
}
static void __init omap_generic_map_io(void)
{
omap_map_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP-1510/1610")
MAINTAINER("Tony Lindgren <tony@atomide.com>")
BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
BOOT_PARAMS(0x10000100)
MAPIO(omap_generic_map_io)
INITIRQ(omap_generic_init_irq)
INIT_MACHINE(omap_generic_init)
MACHINE_END
arch/arm/mach-omap/omap-perseus2.c deleted 100644 → 0
View file @ 308d4fe2
/*
* linux/arch/arm/mach-omap/omap-perseus2.c
*
* Modified from omap-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/clocks.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/omap-perseus2.h>
#include "common.h"
void omap_perseus2_init_irq(void)
{
omap_init_irq();
}
static struct resource smc91x_resources[] = {
[0] = {
.start = OMAP730_FPGA_ETHR_START, /* Physical */
.end = OMAP730_FPGA_ETHR_START + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0,
.end = 0,
.flags = INT_ETHER,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *devices[] __initdata = {
&smc91x_device,
};
static void __init omap_perseus2_init(void)
{
if (!machine_is_omap_perseus2())
return;
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
{OMAP730_FPGA_BASE, OMAP730_FPGA_START, OMAP730_FPGA_SIZE,
MT_DEVICE},
};
static void __init omap_perseus2_map_io(void)
{
omap_map_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));
/* Early, board-dependent init */
/*
* Hold GSM Reset until needed
*/
*DSP_M_CTL &= ~1;
/*
* UARTs -> done automagically by 8250 driver
*/
/*
* CSx timings, GPIO Mux ... setup
*/
/* Flash: CS0 timings setup */
*((volatile __u32 *) OMAP_FLASH_CFG_0) = 0x0000fff3;
*((volatile __u32 *) OMAP_FLASH_ACFG_0) = 0x00000088;
/*
* Ethernet support trough the debug board
* CS1 timings setup
*/
*((volatile __u32 *) OMAP_FLASH_CFG_1) = 0x0000fff3;
*((volatile __u32 *) OMAP_FLASH_ACFG_1) = 0x00000000;
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
*((volatile __u32 *) PERSEUS2_IO_CONF_9) &= 0x1FFFFFFF;
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
MAINTAINER("Kevin Hilman <k-hilman@ti.com>")
BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
BOOT_PARAMS(0x10000100)
MAPIO(omap_perseus2_map_io)
INITIRQ(omap_perseus2_init_irq)
INIT_MACHINE(omap_perseus2_init)
MACHINE_END
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7