ARM: ux500: Consolidate [A|D]B8500 platform data

Move the platform data from all these files into one, delete empty
files and remove all references to them.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/Makefile

@@ -4,8 +4,8 @@
 
 obj-y				:= cpu.o devices.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o

arch/arm/mach-ux500/board-mop500-audio.c

@@ -10,13 +10,11 @@
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/dma-ste-dma40.h>
 
-#include "devices.h"
 #include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
-#include "devices-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -14,10 +14,8 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include "devices.h"
 
 #include "db8500-regs.h"
-#include "devices-db8500.h"
 #include "board-mop500.h"
 #include "ste-dma40-db8500.h"
 

arch/arm/mach-ux500/board-mop500.c

-/*
- * Copyright (C) 2008-2012 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_data/db8500_thermal.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/regulator/ab8500.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/tps6105x.h>
-#include <linux/platform_data/leds-lp55xx.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "setup.h"
-#include "devices.h"
-#include "irqs.h"
-
-#include "ste-dma40-db8500.h"
-#include "db8500-regs.h"
-#include "devices-db8500.h"
-#include "board-mop500.h"
-#include "board-mop500-regulators.h"
-
-struct ab8500_platform_data ab8500_platdata = {
-	.irq_base	= MOP500_AB8500_IRQ_BASE,
-	.regulator	= &ab8500_regulator_plat_data,
-};

arch/arm/mach-ux500/cpu-db8500.c

@@ -28,14 +28,26 @@
 #include <asm/mach/map.h>
 
 #include "setup.h"
-#include "devices.h"
 #include "irqs.h"
 
-#include "devices-db8500.h"
-#include "db8500-regs.h"
+#include "board-mop500-regulators.h"
 #include "board-mop500.h"
+#include "db8500-regs.h"
 #include "id.h"
 
+struct ab8500_platform_data ab8500_platdata = {
+	.irq_base	= MOP500_AB8500_IRQ_BASE,
+	.regulator	= &ab8500_regulator_plat_data,
+};
+
+struct prcmu_pdata db8500_prcmu_pdata = {
+	.ab_platdata	= &ab8500_platdata,
+	.ab_irq		= IRQ_DB8500_AB8500,
+	.irq_base	= IRQ_PRCMU_BASE,
+	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
+	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
+};
+
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),

arch/arm/mach-ux500/cpu.c

@@ -25,7 +25,6 @@
 #include <asm/mach/map.h>
 
 #include "setup.h"
-#include "devices.h"
 
 #include "board-mop500.h"
 #include "db8500-regs.h"

arch/arm/mach-ux500/devices-db8500.c

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/mfd/dbx500-prcmu.h>
-
-#include "setup.h"
-#include "irqs.h"
-
-#include "db8500-regs.h"
-#include "devices-db8500.h"
-
-struct prcmu_pdata db8500_prcmu_pdata = {
-	.ab_platdata	= &ab8500_platdata,
-	.ab_irq		= IRQ_DB8500_AB8500,
-	.irq_base	= IRQ_PRCMU_BASE,
-	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
-	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
-};

arch/arm/mach-ux500/devices-db8500.h

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB8500_H
-#define __DEVICES_DB8500_H
-
-#include "irqs.h"
-#include "db8500-regs.h"
-
-struct platform_device;
-
-extern struct ab8500_platform_data ab8500_platdata;
-extern struct prcmu_pdata db8500_prcmu_pdata;
-
-#endif

arch/arm/mach-ux500/devices.h

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __ASM_ARCH_DEVICES_H__
-#define __ASM_ARCH_DEVICES_H__
-
-struct platform_device;
-struct amba_device;
-
-extern struct amba_device ux500_pl031_device;
-
-#endif