Commit 6f89dd9e authored by Fabrizio Castro's avatar Fabrizio Castro Committed by Geert Uytterhoeven

ARM: dts: iwg20d-q7-common: Add LCD support

The iwg20d comes with a 7" capacitive touch screen, therefore
add support for it.
Signed-off-by: default avatarFabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1573660292-10629-11-git-send-email-fabrizio.castro@bp.renesas.comSigned-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent e42617b8
...@@ -46,6 +46,49 @@ audio_clock: audio_clock { ...@@ -46,6 +46,49 @@ audio_clock: audio_clock {
clock-frequency = <26000000>; clock-frequency = <26000000>;
}; };
lcd_backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
};
lvds-receiver {
compatible = "ti,ds90cf384a", "lvds-decoder";
powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds_receiver_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@1 {
reg = <1>;
lvds_receiver_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
panel {
compatible = "edt,etm0700g0dh6";
backlight = <&lcd_backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds_receiver_out>;
};
};
};
reg_1p5v: 1p5v { reg_1p5v: 1p5v {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "1P5V"; regulator-name = "1P5V";
...@@ -120,6 +163,18 @@ &cmt0 { ...@@ -120,6 +163,18 @@ &cmt0 {
status = "okay"; status = "okay";
}; };
&du {
status = "okay";
};
&gpio2 {
touch-interrupt {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
input;
};
};
&hsusb { &hsusb {
status = "okay"; status = "okay";
pinctrl-0 = <&usb0_pins>; pinctrl-0 = <&usb0_pins>;
...@@ -147,6 +202,25 @@ sgtl5000: codec@a { ...@@ -147,6 +202,25 @@ sgtl5000: codec@a {
VDDIO-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>;
VDDD-supply = <&reg_1p5v>; VDDD-supply = <&reg_1p5v>;
}; };
touch: touchpanel@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
};
};
&lvds0 {
status = "okay";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&lvds_receiver_in>;
};
};
};
}; };
&pci0 { &pci0 {
...@@ -180,6 +254,11 @@ i2c2_pins: i2c2 { ...@@ -180,6 +254,11 @@ i2c2_pins: i2c2 {
function = "i2c2"; function = "i2c2";
}; };
pwm3_pins: pwm3 {
groups = "pwm3";
function = "pwm3";
};
scif0_pins: scif0 { scif0_pins: scif0 {
groups = "scif0_data_d"; groups = "scif0_data_d";
function = "scif0"; function = "scif0";
...@@ -218,6 +297,12 @@ usb1_pins: usb1 { ...@@ -218,6 +297,12 @@ usb1_pins: usb1 {
}; };
}; };
&pwm3 {
pinctrl-0 = <&pwm3_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound { &rcar_sound {
pinctrl-0 = <&sound_pins>; pinctrl-0 = <&sound_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
......
...@@ -39,7 +39,6 @@ &can1 { ...@@ -39,7 +39,6 @@ &can1 {
&du { &du {
pinctrl-0 = <&du_pins>; pinctrl-0 = <&du_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
status = "okay";
ports { ports {
port@0 { port@0 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment