Commit 6f984f3b authored by Zhangfei Gao's avatar Zhangfei Gao Committed by Chris Ball

mmc: update mmp2 mmc resources in arch/arm

Update MMP2 platform code to "sdhci-pxav3", following the driver rename.
Signed-off-by: default avatarZhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: default avatarPhilip Rakity <prakity@marvell.com>
Acked-by: default avatarMark F. Brown <mark.brown314@gmail.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 9f5d71e4
......@@ -177,9 +177,16 @@ static struct i2c_board_info brownstone_twsi1_info[] = {
};
static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
.max_speed = 25000000,
.clk_delay_cycles = 0x1f,
};
static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
.clk_delay_cycles = 0x1f,
.flags = PXA_FLAG_CARD_PERMANENT
| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
};
static void __init brownstone_init(void)
{
mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
......@@ -189,6 +196,7 @@ static void __init brownstone_init(void)
mmp2_add_uart(3);
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
/* enable 5v regulator */
platform_device_register(&brownstone_v_5vp_device);
......
......@@ -154,7 +154,7 @@ static struct i2c_board_info jasper_twsi1_info[] = {
};
static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
.max_speed = 25000000,
.clk_delay_cycles = 0x1f,
};
static void __init jasper_init(void)
......
......@@ -168,10 +168,10 @@ static struct clk_lookup mmp2_clkregs[] = {
INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
};
static int __init mmp2_init(void)
......@@ -222,8 +222,8 @@ MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120);
MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120);
MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120);
MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120);
MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment