ixgbe: Implement PCIe AER support

This patch implements the PCIe Advanced Error Reporting callbacks in
ixgbe.  The 82598 hardware supports AER, so we enable it.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ixgbe/ixgbe.h

@@ -32,6 +32,7 @@
 #include <linux/pci.h>
 #include <linux/netdevice.h>
 #include <linux/inet_lro.h>
+#include <linux/aer.h>
 
 #include "ixgbe_type.h"
 #include "ixgbe_common.h"

drivers/net/ixgbe/ixgbe_main.c

@@ -4020,6 +4020,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_pci_reg;
 	}
 
+	err = pci_enable_pcie_error_reporting(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
+		                    "0x%x\n", err);
+		/* non-fatal, continue */
+	}
+
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 
@@ -4257,6 +4264,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int err;
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
 	/* clear the module not found bit to make sure the worker won't
@@ -4295,6 +4303,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
+	err = pci_disable_pcie_error_reporting(pdev);
+	if (err)
+		dev_err(&pdev->dev,
+		        "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+
 	pci_disable_device(pdev);
 }
 
@@ -4332,21 +4345,33 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	pci_ers_result_t result;
+	int err;
 
 	if (pci_enable_device(pdev)) {
 		DPRINTK(PROBE, ERR,
 		        "Cannot re-enable PCI device after reset.\n");
-		return PCI_ERS_RESULT_DISCONNECT;
-	}
-	pci_set_master(pdev);
-	pci_restore_state(pdev);
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		pci_set_master(pdev);
+		pci_restore_state(pdev);
 
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
 
-	ixgbe_reset(adapter);
+		ixgbe_reset(adapter);
+
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	err = pci_cleanup_aer_uncorrect_error_status(pdev);
+	if (err) {
+		dev_err(&pdev->dev,
+		  "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err);
+		/* non-fatal, continue */
+	}
 
-	return PCI_ERS_RESULT_RECOVERED;
+	return result;
 }
 
 /**