Commit 6fbde6b4 authored by Jiaxun Yang's avatar Jiaxun Yang Committed by Paul Burton

MIPS: Loongson64: Move files to the top-level directory

Current Loongson-3 code can share among all Loongson64 processors.
Signed-off-by: default avatarJiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: default avatarPaul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com
Cc: paul.burton@mips.com
parent 1bdb7b76
......@@ -461,7 +461,33 @@ config MACH_LOONGSON2EF
config MACH_LOONGSON64
bool "Loongson-2/3 GSx64 family of machines"
select ARCH_SPARSEMEM_ENABLE
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select BOOT_ELF32
select BOARD_SCACHE
select CSRC_R4K
select CEVT_R4K
select CPU_HAS_WB
select FORCE_PCI
select ISA
select I8259
select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_4
select USE_GENERIC_EARLY_PRINTK_8250
select SYS_HAS_CPU_LOONGSON64
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT
select LOONGSON_MC146818
select ZONE_DMA32
select NUMA
help
This enables the support of Loongson-2/3 family of processors with
GSx64 microarchitecture.
......
......@@ -24,7 +24,6 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_MACH_LOONGSON64=y
CONFIG_LOONGSON_MACH3X=y
CONFIG_SMP=y
CONFIG_HZ_256=y
CONFIG_KEXEC=y
......
......@@ -43,7 +43,6 @@
#define cpu_has_vint 0
#define cpu_has_vtag_icache 0
#define cpu_has_watch 1
#define cpu_has_wsbh 1
#define cpu_has_ic_fills_f_dc 1
#define cpu_hwrena_impl_bits 0xc0000000
......
# SPDX-License-Identifier: GPL-2.0
if MACH_LOONGSON64
choice
prompt "Machine Type"
config LOONGSON_MACH3X
bool "Generic Loongson 3 family machines"
select ARCH_SPARSEMEM_ENABLE
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select BOOT_ELF32
select BOARD_SCACHE
select CSRC_R4K
select CEVT_R4K
select CPU_HAS_WB
select FORCE_PCI
select ISA
select I8259
select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_4
select USE_GENERIC_EARLY_PRINTK_8250
select SYS_HAS_CPU_LOONGSON64
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select LOONGSON_MC146818
select ZONE_DMA32
select NUMA
help
Generic Loongson 3 family machines utilize the 3A/3B revision
of Loongson processor and RS780/SBX00 chipset.
endchoice
config RS780_HPET
bool "RS780/SBX00 HPET Timer"
depends on LOONGSON_MACH3X
depends on CONFIG_MACH_LOONGSON64
select MIPS_EXTERNAL_TIMER
help
This option enables the hpet timer of AMD RS780/SBX00.
......
# SPDX-License-Identifier: GPL-2.0-only
#
# Common code for all Loongson based systems
# Makefile for Loongson-3 family machines
#
obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \
setup.o init.o cmdline.o env.o time.o reset.o \
obj-$(CONFIG_MACH_LOONGSON64) += common/
#
# All Loongson-3 family machines
#
obj-$(CONFIG_CPU_LOONGSON64) += loongson-3/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_RS780_HPET) += hpet.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
obj-$(CONFIG_SUSPEND) += pm.o
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for loongson based machines.
#
obj-y += setup.o init.o cmdline.o env.o time.o reset.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
#
# Suspend Support
#
obj-$(CONFIG_SUSPEND) += pm.o
# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for Loongson-3 family machines
#
obj-y += irq.o cop2-ex.o platform.o acpi_init.o dma.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_RS780_HPET) += hpet.o
......@@ -35,7 +35,7 @@ obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
obj-$(CONFIG_LOONGSON_MACH3X) += fixup-loongson3.o ops-loongson3.o
obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
......
......@@ -17,8 +17,8 @@ menuconfig MIPS_PLATFORM_DEVICES
if MIPS_PLATFORM_DEVICES
config CPU_HWMON
tristate "Loongson CPU HWMon Driver"
depends on LOONGSON_MACH3X
tristate "Loongson-3 CPU HWMon Driver"
depends on CONFIG_MACH_LOONGSON64
select HWMON
default y
help
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment