Commit 6fdbd49b authored by Christian Lütke-Stetzkamp's avatar Christian Lütke-Stetzkamp Committed by Greg Kroah-Hartman

staging: mt7621-mmc: Remove flags from msdc_dma

The flags of msdc_dma are set to a constant value, so block and dword
padding are disabled and checksum is enabled. By removing the field
the code is easier to read and the difference to the mtk-sd driver is
smaller.
Signed-off-by: default avatarChristian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 4e7fd0f3
......@@ -889,13 +889,7 @@ struct msdc_regs {
struct msdc_eco_ver_reg eco_ver; /* base+0x104h */
};
#define DMA_FLAG_NONE (0x00000000)
#define DMA_FLAG_EN_CHKSUM (0x00000001)
#define DMA_FLAG_PAD_BLOCK (0x00000002)
#define DMA_FLAG_PAD_DWORD (0x00000004)
struct msdc_dma {
u32 flags; /* flags */
u32 xfersz; /* xfer size in bytes */
u32 sglen; /* size of scatter list */
struct scatterlist *sg; /* I/O scatter list */
......
......@@ -1253,7 +1253,6 @@ static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
u32 base = host->base;
//u32 i, j, num, bdlen, arg, xfersz;
u32 j, num;
u8 blkpad, dwpad, chksum;
struct scatterlist *sg = dma->sg;
struct gpd *gpd;
struct bd *bd;
......@@ -1276,9 +1275,6 @@ static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
break;
case MSDC_MODE_DMA_DESC:
blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
dwpad = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
/* calculate the required number of gpd */
num = (dma->sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
......@@ -1292,12 +1288,12 @@ static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
gpd->hwo = 1; /* hw will clear it */
gpd->bdp = 1;
gpd->chksum = 0; /* need to clear first. */
gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
gpd->chksum = msdc_dma_calcs((u8 *)gpd, 16);
/* modify bd*/
for_each_sg(dma->sg, sg, dma->sglen, j) {
bd[j].blkpad = blkpad;
bd[j].dwpad = dwpad;
bd[j].blkpad = 0;
bd[j].dwpad = 0;
bd[j].ptr = (void *)sg_dma_address(sg);
bd[j].buflen = sg_dma_len(sg);
......@@ -1307,10 +1303,10 @@ static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
bd[j].eol = 0;
bd[j].chksum = 0; /* checksume need to clear first */
bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
bd[j].chksum = msdc_dma_calcs((u8 *)(&bd[j]), 16);
}
sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, 1);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ,
MSDC_BRUST_64B);
sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
......@@ -1335,8 +1331,6 @@ static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
BUG_ON(sglen > MAX_BD_NUM); /* not support currently */
dma->sg = sg;
dma->flags = DMA_FLAG_EN_CHKSUM;
//dma->flags = DMA_FLAG_NONE; /* CHECKME */
dma->sglen = sglen;
dma->xfersz = host->xfer_size;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment