regulator: Add support for RICOH PMIC RC5T583 regulator

The RC5T583 PMIC from RICOH consists of 4 DCDC and 10
LDOs. This driver supports the control of different
regulator output through regulator interface.
This driver depends on MFD driver of RC5T583 and uses
mfd rc5t583 apis to communicate to device for accessing
different device's registers.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/Kconfig

@@ -223,6 +223,16 @@ config REGULATOR_PCF50633
 	 Say Y here to support the voltage regulators and convertors
 	 on PCF50633
 
+config REGULATOR_RC5T583
+	tristate "RICOH RC5T583 Power regulators"
+	depends on MFD_RC5T583
+	help
+	  Select this option to enable the power regulator of RICOH
+	  PMIC RC5T583.
+	  This driver supports the control of different power rails of device
+	  through regulator interface. The device supports multiple DCDC/LDO
+	  outputs which can be controlled by i2c communication.
+
 config REGULATOR_S5M8767
 	tristate "Samsung S5M8767A voltage regulator"
 	depends on MFD_S5M_CORE

drivers/regulator/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o

include/linux/mfd/rc5t583.h

@@ -249,6 +249,26 @@ enum {
 	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
 };
 
+enum {
+	RC5T583_REGULATOR_DC0,
+	RC5T583_REGULATOR_DC1,
+	RC5T583_REGULATOR_DC2,
+	RC5T583_REGULATOR_DC3,
+	RC5T583_REGULATOR_LDO0,
+	RC5T583_REGULATOR_LDO1,
+	RC5T583_REGULATOR_LDO2,
+	RC5T583_REGULATOR_LDO3,
+	RC5T583_REGULATOR_LDO4,
+	RC5T583_REGULATOR_LDO5,
+	RC5T583_REGULATOR_LDO6,
+	RC5T583_REGULATOR_LDO7,
+	RC5T583_REGULATOR_LDO8,
+	RC5T583_REGULATOR_LDO9,
+
+	/* Should be last entry */
+	RC5T583_REGULATOR_MAX,
+};
+
 struct rc5t583 {
 	struct device	*dev;
 	struct regmap	*regmap;
@@ -272,11 +292,20 @@ struct rc5t583 {
  * The board specific data is provided through this structure.
  * @irq_base: Irq base number on which this device registers their interrupts.
  * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ * @regulator_deepsleep_slot: The slot number on which device goes to sleep
+ *		in device sleep mode.
+ * @regulator_ext_pwr_control: External power request regulator control. The
+ *		regulator output enable/disable is controlled by the external
+ *		power request input state.
+ * @reg_init_data: Regulator init data.
  */
 
 struct rc5t583_platform_data {
 	int		irq_base;
 	bool		enable_shutdown;
+	int		regulator_deepsleep_slot[RC5T583_REGULATOR_MAX];
+	unsigned long	regulator_ext_pwr_control[RC5T583_REGULATOR_MAX];
+	struct regulator_init_data *reg_init_data[RC5T583_REGULATOR_MAX];
 };
 
 int rc5t583_write(struct device *dev, u8 reg, uint8_t val);