staging: comedi: adl_pci6208: remove multiple board type support

This driver module now only supports a single board type, so remove the
infrastructure for describing multiple board types.  The comedi
"auto_attach" handler, `pci6208_auto_attach()` doesn't need to set the
comedi device's `board_name` or `board_ptr` members.  The former is
automatically pointed to the comedi driver's `driver_name` by the core
comedi module, and the latter is not used anywhere else.  The AO
subdevice's `n_chans` member can be set to 16 without looking it up in
the single element of `pci6208_boards[]`.  There is no need to pass a
board index from the PCI device table to the "auto_attach" handler.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/adl_pci6208.c

@@ -49,22 +49,6 @@
 #define PCI6208_DIO_DI_MASK		(0xf0)
 #define PCI6208_DIO_DI_SHIFT		(4)
 
-enum pci6208_boardid {
-	BOARD_PCI6208,
-};
-
-struct pci6208_board {
-	const char *name;
-	int ao_chans;
-};
-
-static const struct pci6208_board pci6208_boards[] = {
-	[BOARD_PCI6208] = {
-		.name		= "adl_pci6208",
-		.ao_chans	= 16,	/* Only 8 usable on PCI-6208 */
-	},
-};
-
 static int pci6208_ao_eoc(struct comedi_device *dev,
 			  struct comedi_subdevice *s,
 			  struct comedi_insn *insn,
@@ -135,21 +119,13 @@ static int pci6208_do_insn_bits(struct comedi_device *dev,
 }
 
 static int pci6208_auto_attach(struct comedi_device *dev,
-			       unsigned long context)
+			       unsigned long context_unused)
 {
 	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
-	const struct pci6208_board *boardinfo = NULL;
 	struct comedi_subdevice *s;
 	unsigned int val;
 	int ret;
 
-	if (context < ARRAY_SIZE(pci6208_boards))
-		boardinfo = &pci6208_boards[context];
-	if (!boardinfo)
-		return -ENODEV;
-	dev->board_ptr = boardinfo;
-	dev->board_name = boardinfo->name;
-
 	ret = comedi_pci_enable(dev);
 	if (ret)
 		return ret;
@@ -163,7 +139,7 @@ static int pci6208_auto_attach(struct comedi_device *dev,
 	/* analog output subdevice */
 	s->type		= COMEDI_SUBD_AO;
 	s->subdev_flags	= SDF_WRITABLE;
-	s->n_chan	= boardinfo->ao_chans;
+	s->n_chan	= 16;	/* Only 8 usable on PCI-6208 */
 	s->maxdata	= 0xffff;
 	s->range_table	= &range_bipolar10;
 	s->insn_write	= pci6208_ao_insn_write;
@@ -216,7 +192,7 @@ static int adl_pci6208_pci_probe(struct pci_dev *dev,
 }
 
 static const struct pci_device_id adl_pci6208_pci_table[] = {
-	{ PCI_VDEVICE(ADLINK, 0x6208), BOARD_PCI6208 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, adl_pci6208_pci_table);