intel_mid: Renamed *mrst* to *intel_mid*

mrst is used as common name to represent all intel_mid type
soc's. But moorsetwon is just one of the intel_mid soc. So
renamed them to use intel_mid.

This patch mainly renames the variables and related
functions that uses *mrst* prefix with *intel_mid*.

To ensure that there are no functional changes, I have compared
the objdump of related files before and after rename and found
the only difference is symbol and name changes.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Documentation/kernel-parameters.txt

@@ -3471,11 +3471,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			default x2apic cluster mode on platforms
 			supporting x2apic.
 
-	x86_mrst_timer= [X86-32,APBT]
-			Choose timer option for x86 Moorestown MID platform.
+	x86_intel_mid_timer= [X86-32,APBT]
+			Choose timer option for x86 Intel MID platform.
 			Two valid options are apbt timer only and lapic timer
 			plus one apbt timer for broadcast timer.
-			x86_mrst_timer=apbt_only | lapic_and_apbt
+			x86_intel_mid_timer=apbt_only | lapic_and_apbt
 
 	xen_emul_unplug=		[HW,X86,XEN]
 			Unplug Xen emulated devices

arch/x86/include/asm/intel-mid.h

@@ -13,7 +13,7 @@
 
 #include <linux/sfi.h>
 
-extern int pci_mrst_init(void);
+extern int intel_mid_pci_init(void);
 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
 extern int sfi_mrtc_num;
 extern struct sfi_rtc_table_entry sfi_mrtc_array[];
@@ -25,33 +25,33 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[];
  * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
  * identified via MSRs.
  */
-enum mrst_cpu_type {
+enum intel_mid_cpu_type {
 	/* 1 was Moorestown */
-	MRST_CPU_CHIP_PENWELL = 2,
+	INTEL_MID_CPU_CHIP_PENWELL = 2,
 };
 
-extern enum mrst_cpu_type __mrst_cpu_chip;
+extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
 
 #ifdef CONFIG_X86_INTEL_MID
 
-static inline enum mrst_cpu_type mrst_identify_cpu(void)
+static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
 {
-	return __mrst_cpu_chip;
+	return __intel_mid_cpu_chip;
 }
 
 #else /* !CONFIG_X86_INTEL_MID */
 
-#define mrst_identify_cpu()    (0)
+#define intel_mid_identify_cpu()    (0)
 
 #endif /* !CONFIG_X86_INTEL_MID */
 
-enum mrst_timer_options {
-	MRST_TIMER_DEFAULT,
-	MRST_TIMER_APBT_ONLY,
-	MRST_TIMER_LAPIC_APBT,
+enum intel_mid_timer_options {
+	INTEL_MID_TIMER_DEFAULT,
+	INTEL_MID_TIMER_APBT_ONLY,
+	INTEL_MID_TIMER_LAPIC_APBT,
 };
 
-extern enum mrst_timer_options mrst_timer_options;
+extern enum intel_mid_timer_options intel_mid_timer_options;
 
 /*
  * Penwell uses spread spectrum clock, so the freq number is not exactly
@@ -76,6 +76,6 @@ extern void intel_scu_devices_destroy(void);
 #define MRST_VRTC_MAP_SZ	(1024)
 /*#define MRST_VRTC_PGOFFSET	(0xc00) */
 
-extern void mrst_rtc_init(void);
+extern void intel_mid_rtc_init(void);
 
 #endif /* _ASM_X86_INTEL_MID_H */

arch/x86/include/asm/setup.h

@@ -51,9 +51,9 @@ extern void i386_reserve_resources(void);
 extern void setup_default_timer_irq(void);
 
 #ifdef CONFIG_X86_INTEL_MID
-extern void x86_mrst_early_setup(void);
+extern void x86_intel_mid_early_setup(void);
 #else
-static inline void x86_mrst_early_setup(void) { }
+static inline void x86_intel_mid_early_setup(void) { }
 #endif
 
 #ifdef CONFIG_X86_INTEL_CE

arch/x86/include/uapi/asm/bootparam.h

@@ -158,7 +158,7 @@ enum {
 	X86_SUBARCH_PC = 0,
 	X86_SUBARCH_LGUEST,
 	X86_SUBARCH_XEN,
-	X86_SUBARCH_MRST,
+	X86_SUBARCH_INTEL_MID,
 	X86_SUBARCH_CE4100,
 	X86_NR_SUBARCHS,
 };

arch/x86/kernel/apb_timer.c

@@ -157,13 +157,13 @@ static int __init apbt_clockevent_register(void)
 
 	adev->num = smp_processor_id();
 	adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0",
-		mrst_timer_options == MRST_TIMER_LAPIC_APBT ?
+		intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ?
 		APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING,
 		adev_virt_addr(adev), 0, apbt_freq);
 	/* Firmware does EOI handling for us. */
 	adev->timer->eoi = NULL;
 
-	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
+	if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
 		global_clock_event = &adev->timer->ced;
 		printk(KERN_DEBUG "%s clockevent registered as global\n",
 		       global_clock_event->name);
@@ -253,7 +253,7 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
 
 static __init int apbt_late_init(void)
 {
-	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||
+	if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ||
 		!apb_timer_block_enabled)
 		return 0;
 	/* This notifier should be called after workqueue is ready */
@@ -340,7 +340,7 @@ void __init apbt_time_init(void)
 	}
 #ifdef CONFIG_SMP
 	/* kernel cmdline disable apb timer, so we will use lapic timers */
-	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
+	if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
 		printk(KERN_INFO "apbt: disabled per cpu timer\n");
 		return;
 	}

arch/x86/kernel/head32.c

@@ -35,8 +35,8 @@ asmlinkage void __init i386_start_kernel(void)
 
 	/* Call the subarch specific early setup function */
 	switch (boot_params.hdr.hardware_subarch) {
-	case X86_SUBARCH_MRST:
-		x86_mrst_early_setup();
+	case X86_SUBARCH_INTEL_MID:
+		x86_intel_mid_early_setup();
 		break;
 	case X86_SUBARCH_CE4100:
 		x86_ce4100_early_setup();

arch/x86/kernel/rtc.c

@@ -189,7 +189,7 @@ static __init int add_rtc_cmos(void)
 		return 0;
 
 	/* Intel MID platforms don't have ioport rtc */
-	if (mrst_identify_cpu())
+	if (intel_mid_identify_cpu())
 		return -ENODEV;
 
 	platform_device_register(&rtc_device);

arch/x86/pci/intel_mid_pci.c

@@ -205,7 +205,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 			       where, size, value);
 }
 
-static int mrst_pci_irq_enable(struct pci_dev *dev)
+static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 {
 	u8 pin;
 	struct io_apic_irq_attr irq_attr;
@@ -225,23 +225,23 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
 	return 0;
 }
 
-struct pci_ops pci_mrst_ops = {
+struct pci_ops intel_mid_pci_ops = {
 	.read = pci_read,
 	.write = pci_write,
 };
 
 /**
- * pci_mrst_init - installs pci_mrst_ops
+ * intel_mid_pci_init - installs intel_mid_pci_ops
  *
  * Moorestown has an interesting PCI implementation (see above).
  * Called when the early platform detection installs it.
  */
-int __init pci_mrst_init(void)
+int __init intel_mid_pci_init(void)
 {
 	pr_info("Intel MID platform detected, using MID PCI ops\n");
 	pci_mmcfg_late_init();
-	pcibios_enable_irq = mrst_pci_irq_enable;
-	pci_root_ops = pci_mrst_ops;
+	pcibios_enable_irq = intel_mid_pci_irq_enable;
+	pci_root_ops = intel_mid_pci_ops;
 	pci_soc_mode = 1;
 	/* Continue with standard init */
 	return 1;

arch/x86/platform/intel-mid/early_printk_intel_mid.c

@@ -152,7 +152,7 @@ void mrst_early_console_init(void)
 	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
 	freq = 100000000 / (spi0_cdiv + 1);
 
-	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL)
 		mrst_spi_paddr = MRST_REGBASE_SPI1;
 
 	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,

arch/x86/platform/intel-mid/intel_mid_vrtc.c

@@ -116,7 +116,7 @@ int vrtc_set_mmss(const struct timespec *now)
 	return retval;
 }
 
-void __init mrst_rtc_init(void)
+void __init intel_mid_rtc_init(void)
 {
 	unsigned long vrtc_paddr;
 
@@ -154,10 +154,10 @@ static struct platform_device vrtc_device = {
 };
 
 /* Register the RTC device if appropriate */
-static int __init mrst_device_create(void)
+static int __init intel_mid_device_create(void)
 {
 	/* No Moorestown, no device */
-	if (!mrst_identify_cpu())
+	if (!intel_mid_identify_cpu())
 		return -ENODEV;
 	/* No timer, no device */
 	if (!sfi_mrtc_num)
@@ -174,4 +174,4 @@ static int __init mrst_device_create(void)
 	return platform_device_register(&vrtc_device);
 }
 
-module_init(mrst_device_create);
+module_init(intel_mid_device_create);

drivers/platform/x86/intel_scu_ipc.c

@@ -579,7 +579,7 @@ static struct pci_driver ipc_driver = {
 
 static int __init intel_scu_ipc_init(void)
 {
-	platform = mrst_identify_cpu();
+	platform = intel_mid_identify_cpu();
 	if (platform == 0)
 		return -ENODEV;
 	return  pci_register_driver(&ipc_driver);

drivers/watchdog/intel_scu_watchdog.c

@@ -445,7 +445,7 @@ static int __init intel_scu_watchdog_init(void)
 	 *
 	 * If it isn't an intel MID device then it doesn't have this watchdog
 	 */
-	if (!mrst_identify_cpu())
+	if (!intel_mid_identify_cpu())
 		return -ENODEV;
 
 	/* Check boot parameters to verify that their initial values */