Merge groveronline.com:/root/bk/linux-2.5

into groveronline.com:/root/bk/linux-acpi

arch/alpha/Kconfig

@@ -810,47 +810,6 @@ source "drivers/ieee1394/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "drivers/isdn/Kconfig"

arch/arm/Kconfig

@@ -898,45 +898,6 @@ source "drivers/acorn/block/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-endmenu
-
 #   source net/ax25/Config.in
 source "net/irda/Kconfig"
 

arch/cris/Kconfig

@@ -603,47 +603,6 @@ source "drivers/message/i2o/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/i386/Kconfig

@@ -1436,47 +1436,6 @@ source "drivers/message/i2o/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/ia64/Kconfig

@@ -655,44 +655,6 @@ source "net/Kconfig"
 
 if !IA64_HP_SIM
 
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local systems) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "drivers/isdn/Kconfig"

arch/m68knommu/Kconfig

@@ -611,47 +611,6 @@ source "drivers/message/i2o/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/mips/Kconfig

@@ -919,47 +919,6 @@ endif
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/mips64/Kconfig

@@ -504,47 +504,6 @@ endmenu
 #source drivers/message/i2o/Config.in
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/parisc/Kconfig

@@ -276,46 +276,6 @@ source "drivers/md/Kconfig"
 
 source "net/Kconfig"
 
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 #source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/ppc/Kconfig

@@ -1415,47 +1415,6 @@ source "drivers/message/i2o/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/ppc64/Kconfig

@@ -354,47 +354,6 @@ source "drivers/message/i2o/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/sh/Kconfig

@@ -745,48 +745,6 @@ source "drivers/ieee1394/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
-
 menu "Old CD-ROM drivers (not SCSI, not IDE)"
 
 config CD_NO_IDESCSI

arch/sparc64/Kconfig

@@ -1404,47 +1404,6 @@ source "drivers/ieee1394/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 # This one must be before the filesystem configs. -DaveM

arch/v850/Kconfig

@@ -304,47 +304,6 @@ source "drivers/message/i2o/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

arch/x86_64/Kconfig

@@ -567,49 +567,6 @@ source "drivers/ieee1394/Kconfig"
 #source drivers/message/i2o/Config.in
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-# ATM seems to be largely 64bit unsafe and also unmaintained - disable it for now.
-#      if [ "$CONFIG_ATM" = "y" ]; then
-#         source drivers/atm/Config.in
-#      fi
-endmenu
-
 source "net/ax25/Kconfig"
 
 source "net/irda/Kconfig"

drivers/net/arcnet/Kconfig

@@ -3,7 +3,7 @@
 #
 
 menu "ARCnet devices"
-	depends on NETDEVICES
+	depends on NETDEVICES && (ISA || PCI)
 
 config ARCNET
 	tristate "ARCnet support"

drivers/net/tokenring/Kconfig

@@ -91,7 +91,7 @@ config 3C359
 
 config TMS380TR
 	tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-	depends on TR
+	depends on TR && (PCI || ISA)
 	---help---
 	  This driver provides generic support for token ring adapters
 	  based on the Texas Instruments TMS380 series chipsets.  This

drivers/net/wireless/Kconfig

@@ -2,12 +2,12 @@
 # Wireless LAN device configuration
 #
 comment "Wireless ISA/PCI cards support"
-	depends on NET_RADIO
+	depends on NET_RADIO && (ISA || PCI || ALL_PPC || PCMCIA)
 
 # Good old obsolete Wavelan.
 config WAVELAN
 	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
-	depends on NET_RADIO
+	depends on NET_RADIO && ISA
 	---help---
 	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
 	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
@@ -54,7 +54,7 @@ config AIRO
 
 config HERMES
 	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
-	depends on NET_RADIO
+	depends on NET_RADIO && (ALL_PPC || PCI || PCMCIA)
 	---help---
 	  A driver for 802.11b wireless cards based based on the "Hermes" or
 	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast

init/Kconfig

@@ -37,22 +37,6 @@ endmenu
 
 menu "General setup"
 
-config NET
-	bool "Networking support"
-	---help---
-	  Unless you really know what you are doing, you should say Y here.
-	  The reason is that some programs need kernel networking support even
-	  when running on a stand-alone machine that isn't connected to any
-	  other computer. If you are upgrading from an older kernel, you
-	  should consider updating your networking tools too because changes
-	  in the kernel and the tools often go hand in hand. The tools are
-	  contained in the package net-tools, the location and version number
-	  of which are given in <file:Documentation/Changes>.
-
-	  For a general introduction to Linux networking, it is highly
-	  recommended to read the NET-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>.
-
 config SYSVIPC
 	bool "System V IPC"
 	---help---

net/Kconfig

@@ -2,6 +2,24 @@
 # Network configuration
 #
 
+menu "Networking support"
+
+config NET
+	bool "Networking support"
+	---help---
+	  Unless you really know what you are doing, you should say Y here.
+	  The reason is that some programs need kernel networking support even
+	  when running on a stand-alone machine that isn't connected to any
+	  other computer. If you are upgrading from an older kernel, you
+	  should consider updating your networking tools too because changes
+	  in the kernel and the tools often go hand in hand. The tools are
+	  contained in the package net-tools, the location and version number
+	  of which are given in <file:Documentation/Changes>.
+
+	  For a general introduction to Linux networking, it is highly
+	  recommended to read the NET-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
 menu "Networking options"
 	depends on NET
 
@@ -652,3 +670,6 @@ endmenu
 
 endmenu
 
+source "drivers/net/Kconfig"
+
+endmenu