edac: altera: Add Altera SDRAM EDAC support

This patch adds support for the CycloneV and ArriaV SDRAM controllers.
Correction and reporting of SBEs, Panic on DBEs.

There was a discussion thread on whether this driver should be an mfd driver
or just make use of syscon, which is already a mfd. Ultimately, the
decision to use a simple syscon interface was reached.[1]

[1] https://lkml.org/lkml/2014/7/30/514

[dinguyen] Fixed Kconfig to have EDAC_ALTERA_MC as a tristate to prevent a
build failure for allmodconfig.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Borislav Petkov <bp@suse.de>
[dinguyen] cleaned up commit message
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

MAINTAINERS

@@ -1376,6 +1376,11 @@ M:	Dinh Nguyen <dinguyen@altera.com>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/SOCFPGA EDAC SUPPORT
+M:	Thor Thayer <tthayer@opensource.altera.com>
+S:	Maintained
+F:	drivers/edac/altera_edac.
+
 ARM/STI ARCHITECTURE
 M:	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
 M:	Maxime Coquelin <maxime.coquelin@st.com>

drivers/edac/Kconfig

@@ -376,4 +376,13 @@ config EDAC_OCTEON_PCI
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.
 
+config EDAC_ALTERA_MC
+	tristate "Altera SDRAM Memory Controller EDAC"
+	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
+	help
+	  Support for error detection and correction on the
+	  Altera SDRAM memory controller. Note that the
+	  preloader must initialize the SDRAM before loading
+	  the kernel.
+
 endif # EDAC

drivers/edac/Makefile

@@ -65,3 +65,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
 obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
 obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
 obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
+
+obj-$(CONFIG_EDAC_ALTERA_MC)		+= altera_edac.o