Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)
  powerpc/nvram: Enable use Generic NVRAM driver for different size chips
  powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
  powerpc/ps3: Workaround for flash memory I/O error
  powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
  powerpc/perf_counters: Reduce stack usage of power_check_constraints
  powerpc: Fix bug where perf_counters breaks oprofile
  powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
  powerpc/irq: Improve nanodoc
  powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
  powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
  powerpc/book3e: Add missing page sizes
  powerpc/pseries: Fix to handle slb resize across migration
  powerpc/powermac: Thermal control turns system off too eagerly
  powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
  powerpc/405ex: support cuImage via included dtb
  powerpc/405ex: provide necessary fixup function to support cuImage
  powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
  powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
  powerpc/44x: Update Arches defconfig
  powerpc/44x: Update Arches dts
  ...

Fix up conflicts in drivers/char/agp/uninorth-agp.c

arch/powerpc/Kconfig

@@ -123,7 +123,8 @@ config PPC
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
-	select HAVE_DMA_ATTRS if PPC64
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
@@ -310,10 +311,6 @@ config SWIOTLB
 	  platforms where the size of a physical address is larger
 	  than the bus address.  Not all platforms support this.
 
-config PPC_NEED_DMA_SYNC_OPS
-	def_bool y
-	depends on (NOT_COHERENT_CACHE || SWIOTLB)
-
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
@@ -475,7 +472,7 @@ config PPC_16K_PAGES
 	bool "16k page size" if 44x
 
 config PPC_64K_PAGES
-	bool "64k page size" if 44x || PPC_STD_MMU_64
+	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
@@ -495,16 +492,16 @@ endchoice
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
-	range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES
-	default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES
-	range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES
-	default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES
-	range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES
-	default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
-	range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
-	default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
-	range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
-	default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
+	range 9 64 if PPC64 && PPC_64K_PAGES
+	default "9" if PPC64 && PPC_64K_PAGES
+	range 13 64 if PPC64 && !PPC_64K_PAGES
+	default "13" if PPC64 && !PPC_64K_PAGES
+	range 9 64 if PPC32 && PPC_16K_PAGES
+	default "9" if PPC32 && PPC_16K_PAGES
+	range 7 64 if PPC32 && PPC_64K_PAGES
+	default "7" if PPC32 && PPC_64K_PAGES
+	range 5 64 if PPC32 && PPC_256K_PAGES
+	default "5" if PPC32 && PPC_256K_PAGES
 	range 11 64
 	default "11"
 	help

arch/powerpc/Makefile

@@ -77,7 +77,7 @@ CPP		= $(CC) -E $(KBUILD_CFLAGS)
 CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
 
 ifeq ($(CONFIG_PPC64),y)
-GCC_BROKEN_VEC	:= $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi)
+GCC_BROKEN_VEC	:= $(call cc-ifversion, -lt, 0400, y)
 
 ifeq ($(CONFIG_POWER4_ONLY),y)
 ifeq ($(CONFIG_ALTIVEC),y)

arch/powerpc/boot/4xx.c

@@ -8,6 +8,10 @@
  *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *   Copyright (c) 2003, 2004 Zultys Technologies
  *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *   Updated for supporting PPC405EX on Kilauea.
+ *   Tiejun Chen <tiejun.chen@windriver.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk)
 	dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
 	dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
 }
+
+static u8 ibm405ex_fwdv_multi_bits[] = {
+	/* values for:  1 - 16 */
+	0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
+	0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
+};
+
+u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv)
+{
+	u32 index;
+
+	for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++)
+		if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index])
+			return index + 1;
+
+	return 0;
+}
+
+static u8 ibm405ex_fbdv_multi_bits[] = {
+	/* values for:  1 - 100 */
+	0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+	0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+	0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+	0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+	0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+	0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+	0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+	0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+	0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+	0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+	/* values for:  101 - 200 */
+	0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+	0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+	0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
+	0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+	0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+	0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+	0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+	0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+	0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+	0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+	/* values for:  201 - 255 */
+	0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+	0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+	0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+	0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+	0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+	0x03, 0x87, 0x0f, 0x9f, 0x3f  /* END */
+};
+
+u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv)
+{
+	u32 index;
+
+	for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++)
+		if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index])
+			return index + 1;
+
+	return 0;
+}
+
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk)
+{
+	/* PLL config */
+	u32 pllc  = CPR0_READ(DCRN_CPR0_PLLC);
+	u32 plld  = CPR0_READ(DCRN_CPR0_PLLD);
+	u32 cpud  = CPR0_READ(DCRN_CPR0_PRIMAD);
+	u32 plbd  = CPR0_READ(DCRN_CPR0_PRIMBD);
+	u32 opbd  = CPR0_READ(DCRN_CPR0_OPBD);
+	u32 perd  = CPR0_READ(DCRN_CPR0_PERD);
+
+	/* Dividers */
+	u32 fbdv   = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1));
+
+	u32 fwdva  = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1));
+
+	u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8);
+
+	/* PLBDV0 is hardwared to 010. */
+	u32 plbdv0 = 2;
+	u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8);
+
+	u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4);
+
+	u32 perdv0 = __fix_zero((perd >> 24) & 3, 4);
+
+	/* Resulting clocks */
+	u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1;
+
+	/* PLL's VCO is the source for primary forward ? */
+	if (pllc & 0x40000000) {
+		u32 m;
+
+		/* Feedback path */
+		switch ((pllc >> 24) & 7) {
+		case 0:
+			/* PLLOUTx */
+			m = fbdv;
+			break;
+		case 1:
+			/* CPU */
+			m = fbdv * fwdva * cpudv0;
+			break;
+		case 5:
+			/* PERClk */
+			m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0;
+			break;
+		default:
+			printf("WARNING ! Invalid PLL feedback source !\n");
+			goto bypass;
+		}
+
+		vco = (unsigned int)(sys_clk * m);
+	} else {
+bypass:
+		/* Bypass system PLL */
+		vco = 0;
+	}
+
+	/* CPU = VCO / ( FWDVA x CPUDV0) */
+	cpu = vco / (fwdva * cpudv0);
+	/* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */
+	plb = vco / (fwdva * plb2xdv0 * plbdv0);
+	/* OPB = PLB / OPBDV0 */
+	opb = plb / opbdv0;
+	/* EBC = OPB / PERDV0 */
+	ebc = opb / perdv0;
+
+	tb = cpu;
+	uart0 = uart1 = uart_clk;
+
+	dt_fixup_cpu_clocks(cpu, tb, 0);
+	dt_fixup_clock("/plb", plb);
+	dt_fixup_clock("/plb/opb", opb);
+	dt_fixup_clock("/plb/opb/ebc", ebc);
+	dt_fixup_clock("/plb/opb/serial@ef600200", uart0);
+	dt_fixup_clock("/plb/opb/serial@ef600300", uart1);
+}

arch/powerpc/boot/4xx.h

@@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc);
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
 void ibm405ep_fixup_clocks(unsigned int sys_clk);
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk);
 void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
 void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
 			   unsigned int tmr_clk);

arch/powerpc/boot/Makefile

@@ -39,6 +39,7 @@ DTS_FLAGS	?= -p 1024
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -75,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
-		cuboot-acadia.c cuboot-amigaone.c
+		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
+image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 

arch/powerpc/boot/cuboot-hotfoot.c

+/*
+ * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board
+ *
+ * Author: Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_HOTFOOT
+
+#include "ppcboot-hotfoot.h"
+
+static bd_t bd;
+
+#define NUM_REGS 3
+
+static void hotfoot_fixups(void)
+{
+	u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); 
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0);
+	dt_fixup_clock("/plb", bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/opb", bd.bi_opbfreq);
+	dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq);
+	dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); 
+	dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); 
+	
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+
+	/* Is this a single eth/serial board? */
+	if ((bd.bi_enet1addr[0] == 0) && 
+	    (bd.bi_enet1addr[1] == 0) &&
+	    (bd.bi_enet1addr[2] == 0) &&
+	    (bd.bi_enet1addr[3] == 0) &&
+	    (bd.bi_enet1addr[4] == 0) &&
+	    (bd.bi_enet1addr[5] == 0)) {
+		void *devp;
+
+		printf("Trimming devtree for single serial/eth board\n");
+
+		devp = finddevice("/plb/opb/serial@ef600300");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/serial@ef600300");
+		del_node(devp);
+
+		devp = finddevice("/plb/opb/ethernet@ef600900");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/ethernet@ef600900");
+		del_node(devp);
+	}
+
+	ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900);
+
+	/* Fix up flash size in fdt for 4M boards. */
+	if (bd.bi_flashsize < 0x800000) {
+		u32 regs[NUM_REGS];
+		void *devp = finddevice("/plb/ebc/nor_flash@0");
+		if (!devp)
+			fatal("Can't find FDT node for nor_flash!??");
+
+		printf("Fixing devtree for 4M Flash\n");
+		
+		/* First fix up the base addresse */
+		getprop(devp, "reg", regs, sizeof(regs));
+		regs[0] = 0;
+		regs[1] = 0xffc00000;
+		regs[2] = 0x00400000;
+		setprop(devp, "reg", regs, sizeof(regs));
+		
+		/* Then the offsets */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@0");
+		if (!devp)
+			fatal("Can't find FDT node for partition@0");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@1");
+		if (!devp)
+			fatal("Can't find FDT node for partition@1");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@2");
+		if (!devp)
+			fatal("Can't find FDT node for partition@2");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@3");
+		if (!devp)
+			fatal("Can't find FDT node for partition@3");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@4");
+		if (!devp)
+			fatal("Can't find FDT node for partition@4");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@6");
+		if (!devp)
+			fatal("Can't find FDT node for partition@6");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		/* Delete the FeatFS node */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@5");
+		if (!devp)
+			fatal("Can't find FDT node for partition@5");
+		del_node(devp);
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = hotfoot_fixups;
+        platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}

arch/powerpc/boot/cuboot-kilauea.c

+/*
+ * Old U-boot compatibility for PPC405EX. This image is already included
+ * a dtb.
+ *
+ * Author: Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+#define KILAUEA_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk */
+
+static bd_t bd;
+
+static void kilauea_fixups(void)
+{
+	unsigned long sysclk = 33333333;
+
+	ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK);
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = kilauea_fixups;
+	platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}

arch/powerpc/boot/dcr.h

@@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
 #define DCRN_CPC0_PLLMR1  0xf4
 #define DCRN_CPC0_UCR     0xf5
 
-/* 440GX Clock control etc */
-
-
+/* 440GX/405EX Clock Control reg */
 #define DCRN_CPR0_CLKUPD				0x020
 #define DCRN_CPR0_PLLC					0x040
 #define DCRN_CPR0_PLLD					0x060

arch/powerpc/boot/dts/arches.dts

@@ -124,6 +124,16 @@ CPR0: cpr {
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460gt", "ibm,plb4";
 		#address-cells = <2>;
@@ -168,6 +178,38 @@ EBC0: ebc {
 				/* ranges property is supplied by U-Boot */
 				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x02000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x01b60000>;
+					};
+					partition@1f60000 {
+						label = "env";
+						reg = <0x01f60000 0x00040000>;
+					};
+					partition@1fa0000 {
+						label = "u-boot";
+						reg = <0x01fa0000 0x00060000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -186,6 +228,14 @@ IIC0: i2c@ef600700 {
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sttm@4a {
+					compatible = "ad,ad7414";
+					reg = <0x4a>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x0 0x8>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {

arch/powerpc/boot/dts/canyonlands.dts

 /*
  * Device Tree Source for AMCC Canyonlands (460EX)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -149,19 +149,19 @@ MAL0: mcmal {
 					/*RXDE*/  0x5 0x4>;
 		};
 
-                USB0: ehci@bffd0400 {
-                        compatible = "ibm,usb-ehci-460ex", "usb-ehci";
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1d 4>;
-                        reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
-                };
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
 
-                USB1: usb@bffd0000 {
-                        compatible = "ohci-le";
-                        reg = <4 0xbffd0000 0x60>;
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1e 4>;
-                };
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
@@ -215,6 +215,29 @@ partition@3fa0000 {
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {

arch/powerpc/boot/dts/gef_sbc310.dts

@@ -83,34 +83,34 @@ localbus@fef05000 {
 
 		/* flash@0,0 is a mirror of part of the memory in flash@1,0
 		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
+			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			partition@0 {
 				label = "firmware";
-				reg = <0x00000000 0x01000000>;
+				reg = <0x0 0x01000000>;
 				read-only;
 			};
 		};
 		*/
 
 		flash@1,0 {
-			compatible = "cfi-flash";
-			reg = <1 0 0x8000000>;
+			compatible = "gef,sbc310-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			partition@0 {
 				label = "user";
-				reg = <0x00000000 0x07800000>;
+				reg = <0x0 0x7800000>;
 			};
 			partition@7800000 {
 				label = "firmware";
-				reg = <0x07800000 0x00800000>;
+				reg = <0x7800000 0x800000>;
 				read-only;
 			};
 		};
@@ -121,18 +121,16 @@ fpga@4,0 {
 		};
 
 		wdt@4,2000 {
-			#interrupt-cells = <2>;
-			device_type = "watchdog";
-			compatible = "gef,fpga-wdt";
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
 			reg = <0x4 0x2000 0x8>;
 			interrupts = <0x1a 0x4>;
 			interrupt-parent = <&gef_pic>;
 		};
 /*
 		wdt@4,2010 {
-			#interrupt-cells = <2>;
-			device_type = "watchdog";
-			compatible = "gef,fpga-wdt";
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
 			reg = <0x4 0x2010 0x8>;
 			interrupts = <0x1b 0x4>;
 			interrupt-parent = <&gef_pic>;
@@ -141,7 +139,7 @@ wdt@4,2010 {
 		gef_pic: pic@4,4000 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			compatible = "gef,fpga-pic";
+			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
 			reg = <0x4 0x4000 0x20>;
 			interrupts = <0x8
 				      0x9>;
@@ -161,7 +159,7 @@ soc@fef00000 {
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		compatible = "simple-bus";
+		compatible = "fsl,mpc8641-soc", "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
 		bus-frequency = <33333333>;
 
@@ -376,4 +374,40 @@ pcie@0 {
 				  0x0 0x00400000>;
 		};
 	};
+
+	pci1: pcie@fef09000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef09000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <0x19 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
 };

arch/powerpc/boot/dts/hotfoot.dts

+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "est,hotfoot";
+	compatible = "est,hotfoot";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ep";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ep", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* Hotfoot has UART0/UART1 swapped */
+
+			UART0: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ep", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				rtc@68 {
+					/* Actually a DS1339 */
+					compatible = "dallas,ds1307";
+					reg = <0x68>;
+				};
+
+				temp@4a {
+					/* Not present on all boards */
+					compatible = "national,lm75";
+					reg = <0x4a>;
+				};
+			};
+
+			GPIO: gpio@ef600700 {
+				#gpio-cells = <2>;
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600700 0x00000020>;
+				gpio-controller;
+			};
+
+			gpio-leds {
+				compatible = "gpio-leds";
+				status {
+					label = "Status";
+					gpios = <&GPIO 1 0>;
+				};
+				radiorx {
+					label = "Rx";
+					gpios = <&GPIO 0xe 0>;
+				};
+			};
+
+			EMAC0: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "mii";
+				phy-map = <0x00000000>;
+			};
+
+			EMAC1: ethernet@ef600900 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x11 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600900 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				mdio-device = <&EMAC0>;
+				phy-mode = "mii";
+				phy-map = <0x0000001>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ep", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			nor_flash@0 {
+				compatible = "cfi-flash";
+				bank-width = <2>;
+				reg = <0x0 0xff800000 0x00800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* This mapping is for the 8M flash
+				   4M flash has all ofssets -= 4M,
+				   and FeatFS partition is not present */
+				partition@0 {
+					label = "Bootloader";
+					reg = <0x7c0000 0x40000>;
+					/* read-only; */
+				};
+				partition@1 {
+					label = "Env_and_Config_Primary";
+					reg = <0x400000 0x10000>;
+				};
+				partition@2 {
+					label = "Kernel";
+					reg = <0x420000 0x100000>;
+				};
+				partition@3 {
+					label = "Filesystem";
+					reg = <0x520000 0x2a0000>;
+				};
+				partition@4 {
+					label = "Env_and_Config_Secondary";
+					reg = <0x410000 0x10000>;
+				};
+				partition@5 {
+					label = "FeatFS";
+					reg = <0x000000 0x400000>;
+				};
+				partition@6 {
+					label = "Bootloader_Env";
+					reg = <0x7d0000 0x10000>;
+				};
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0xeec00000 0x00000008    /* Config space access */
+				0xeed80000 0x00000004    /* IACK */
+				0xeed80000 0x00000004    /* Special cycle */
+				0xef480000 0x00000040>;  /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-parent = <&UIC0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+				/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+				>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};

arch/powerpc/boot/dts/kilauea.dts

 /*
  * Device Tree Source for AMCC Kilauea (405EX)
  *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -150,7 +150,11 @@ nor_flash@0,0 {
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0x00000000 0x00200000>;
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "root";
@@ -169,6 +173,29 @@ partition@3fa0000 {
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600200 {
@@ -198,6 +225,18 @@ IIC0: i2c@ef600400 {
 				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rtc@68 {
+					compatible = "dallas,ds1338";
+					reg = <0x68>;
+				};
+
+				dtt@48 {
+					compatible = "dallas,ds1775";
+					reg = <0x48>;
+				};
 			};
 
 			IIC1: i2c@ef600500 {
@@ -207,7 +246,6 @@ IIC1: i2c@ef600500 {
 				interrupts = <0x7 0x4>;
 			};
 
-
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
 				reg = <0xef600b00 0x00000104>;

arch/powerpc/boot/dts/mgcoge.dts

@@ -162,6 +162,59 @@ eth0: ethernet@11a60 {
 				fixed-link = <0 0 10 0 0>;
 			};
 
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x10d00 0x14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <12>;
+				fsl,mdc-pin = <13>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			/* FCC1 management to switch */
+			ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+				local-mac-address = [ 00 01 02 03 04 07 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy0>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			/* FCC2 to redundant core unit over backplane */
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				local-mac-address = [ 00 01 02 03 04 08 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy1>;
+				linux,network-index = <2>;
+				fsl,cpm-command = <0x16200300>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {

arch/powerpc/boot/dts/mpc8272ads.dts

@@ -173,6 +173,14 @@ scc4: serial@11a60 {
 				fsl,cpm-command = <0xce00000>;
 			};
 
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				mode = "peripheral";
+			};
+
 			mdio@10d40 {
 				device_type = "mdio";
 				compatible = "fsl,mpc8272ads-mdio-bitbang",

arch/powerpc/boot/dts/mpc8377_rdb.dts

@@ -174,7 +174,7 @@ sdhci@2e000 {
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 

arch/powerpc/boot/dts/mpc8378_rdb.dts

@@ -174,7 +174,7 @@ sdhci@2e000 {
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 

arch/powerpc/boot/dts/mpc8379_rdb.dts

@@ -172,7 +172,7 @@ sdhci@2e000 {
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 

arch/powerpc/boot/dts/mpc8536ds.dts

@@ -14,8 +14,8 @@
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -42,7 +42,7 @@ PowerPC,8536@0 {
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
 	soc@ffe00000 {
@@ -50,7 +50,7 @@ soc@ffe00000 {
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
+		ranges = <0x0 0 0xffe00000 0x100000>;
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		ecm-law@0 {
@@ -250,6 +250,14 @@ usb@2b000 {
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
@@ -347,13 +355,13 @@ pci0: pci@ffe08000 {
 		interrupt-parent = <&mpic>;
 		interrupts = <24 0x2>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
+		reg = <0 0xffe08000 0 0x1000>;
 	};
 
 	pci1: pcie@ffe09000 {
@@ -362,10 +370,10 @@ pci1: pcie@ffe09000 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
+		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 0x2>;
@@ -398,10 +406,10 @@ pci2: pcie@ffe0a000 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0a000 0x1000>;
+		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 0x2>;
@@ -434,10 +442,10 @@ pci3: pcie@ffe0b000 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0b000 0x1000>;
+		reg = <0 0xffe0b000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <27 0x2>;

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -100,6 +100,21 @@ i2c@3000 {
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c64";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c64";
+				reg = <0x57>;
+			};
 		};
 
 		i2c@3100 {
@@ -111,6 +126,11 @@ i2c@3100 {
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 
 		dma@21300 {

arch/powerpc/boot/dts/mpc8569mds.dts

@@ -99,8 +99,18 @@ partition@1f80000 {
 		};
 
 		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,mpc8569mds-bcsr";
 			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr17: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569mds-bcsr-gpio";
+				reg = <0x11 0x1>;
+				gpio-controller;
+			};
 		};
 
 		nand@3,0 {
@@ -315,6 +325,14 @@ qe_pio_e: gpio-controller@80 {
 				gpio-controller;
 			};
 
+			qe_pio_f: gpio-controller@a0 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0xa0 0x18>;
+				gpio-controller;
+			};
+
 			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
@@ -419,6 +437,16 @@ qeic: interrupt-controller@80 {
 			interrupt-parent = <&mpic>;
 		};
 
+		timer@440 {
+			compatible = "fsl,mpc8569-qe-gtm",
+				     "fsl,qe-gtm", "fsl,gtm";
+			reg = <0x440 0x40>;
+			interrupts = <12 13 14 15>;
+			interrupt-parent = <&qeic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
 		spi@4c0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -446,6 +474,23 @@ spi@500 {
 			mode = "cpu";
 		};
 
+		usb@6c0 {
+			compatible = "fsl,mpc8569-qe-usb",
+				     "fsl,mpc8323-qe-usb";
+			reg = <0x6c0 0x40 0x8b00 0x100>;
+			interrupts = <11>;
+			interrupt-parent = <&qeic>;
+			fsl,fullspeed-clock = "clk5";
+			fsl,lowspeed-clock = "brg10";
+			gpios = <&qe_pio_f 3 0   /* USBOE */
+				 &qe_pio_f 4 0   /* USBTP */
+				 &qe_pio_f 5 0   /* USBTN */
+				 &qe_pio_f 6 0   /* USBRP */
+				 &qe_pio_f 8 0   /* USBRN */
+				 &bcsr17   6 0   /* SPEED */
+				 &bcsr17   5 1>; /* POWER */
+		};
+
 		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";

arch/powerpc/boot/dts/sbc8349.dts

@@ -146,18 +146,6 @@ usb@22000 {
 			phy_type = "ulpi";
 			port0;
 		};
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
-		usb@23000 {
-			device_type = "usb";
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-		};
 
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
@@ -277,15 +265,55 @@ ipic: pic@700 {
 		};
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349-localbus", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xff800000 0x00800000		/* 8MB Flash */
+			  0x1 0x0 0xf8000000 0x00002000		/* 8KB EEPROM */
+			  0x2 0x0 0x10000000 0x04000000		/* 64MB SDRAM */
+			  0x3 0x0 0x10000000 0x04000000>;	/* 64MB SDRAM */
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,28F640J3A", "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x006c0000>;
+			};
+
+			partition@700000 {
+				label = "legacy u-boot";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+
+		};
+	};
+
 	pci0: pci@e0008500 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
+				 0x8800 0x0 0x0 0x1 &ipic 48 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 17 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
 
 		interrupt-parent = <&ipic>;
 		interrupts = <0x42 0x8>;

arch/powerpc/boot/dts/sbc8560.dts

@@ -303,7 +303,6 @@ enet3: ethernet@91340 {
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8560-guts";
 			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 	};
 

arch/powerpc/boot/mktree.c

@@ -36,7 +36,7 @@ typedef struct boot_block {
 } boot_block_t;
 
 #define IMGBLK	512
-char	tmpbuf[IMGBLK];
+unsigned int	tmpbuf[IMGBLK / sizeof(unsigned int)];
 
 int main(int argc, char *argv[])
 {
@@ -95,13 +95,13 @@ int main(int argc, char *argv[])
 
 	/* Assume zImage is an ELF file, and skip the 64K header.
 	*/
-	if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
+	if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
 		fprintf(stderr, "%s is too small to be an ELF image\n",
 				argv[1]);
 		exit(4);
 	}
 
-	if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
+	if (tmpbuf[0] != htonl(0x7f454c46)) {
 		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
 		exit(4);
 	}
@@ -121,11 +121,11 @@ int main(int argc, char *argv[])
 	}
 
 	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, IMGBLK) < 0) {
+		if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) {
 			perror("zImage read");
 			exit(5);
 		}
-		cp = (unsigned int *)tmpbuf;
+		cp = tmpbuf;
 		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
 			cksum += *cp++;
 		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {

arch/powerpc/boot/ppcboot-hotfoot.h

+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/* 
+ * Unfortunately, the ESTeem Hotfoot board uses a mangled version of 
+ * ppcboot.h for historical reasons, and in the interest of having a 
+ * mainline kernel boot on the production board+bootloader, this was the 
+ * least-offensive solution.  Please direct all flames to:
+ *
+ *  Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * (This header is identical to ppcboot.h except for the 
+ *  TARGET_HOTFOOT bits)
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+	defined(TARGET_83xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+#if defined(TARGET_HOTFOOT)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif /* TARGET_HOOTFOOT */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(TARGET_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HOTFOOT)
+	unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif
+#if defined(TARGET_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
+    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_HOTFOOT)
+        int             bi_phynum[2];           /* Determines phy mapping */
+        int             bi_phymode[2];          /* Determines phy mode */
+#endif
+#if defined(TARGET_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq	bi_intfreq
+
+#endif	/* __PPCBOOT_H__ */

arch/powerpc/boot/wrapper

@@ -46,6 +46,7 @@ CROSS=
 # directory for object and other files used by this script
 object=arch/powerpc/boot
 objbin=$object
+dtc=scripts/dtc/dtc
 
 # directory for working files
 tmpdir=.
@@ -124,7 +125,7 @@ if [ -n "$dts" ]; then
     if [ -z "$dtb" ]; then
 	dtb="$platform.dtb"
     fi
-    $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
+    $dtc -O dtb -o "$dtb" -b 0 "$dts"
 fi
 
 if [ -z "$kernel" ]; then

arch/powerpc/configs/mgcoge_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:51 2009
+# Linux kernel version: 2.6.31-rc5
+# Fri Aug  7 08:19:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -582,7 +584,8 @@ CONFIG_PHYLIB=y
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_MACE is not set
@@ -608,8 +611,8 @@ CONFIG_MII=y
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
-# CONFIG_FS_ENET_HAS_FCC is not set
-# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_POWERMAC is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_PCF8575 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 

arch/powerpc/configs/mpc85xx_defconfig

@@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
+CONFIG_MPC85xx_RDB=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 # CONFIG_XES_MPC85xx is not set

arch/powerpc/include/asm/cell-regs.h

@@ -303,6 +303,17 @@ struct cbe_mic_tm_regs {
 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
 
+
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
+
 /* some utility functions to deal with SMT */
 extern u32 cbe_get_hw_thread_id(int cpu);
 extern u32 cbe_cpu_to_node(int cpu);

arch/powerpc/include/asm/cputhreads.h

@@ -5,6 +5,15 @@
 
 /*
  * Mapping of threads to cores
+ *
+ * Note: This implementation is limited to a power of 2 number of
+ * threads per core and the same number for each core in the system
+ * (though it would work if some processors had less threads as long
+ * as the CPU numbers are still allocated, just not brought offline).
+ *
+ * However, the API allows for a different implementation in the future
+ * if needed, as long as you only use the functions and not the variables
+ * directly.
  */
 
 #ifdef CONFIG_SMP
@@ -67,5 +76,12 @@ static inline int cpu_first_thread_in_core(int cpu)
 	return cpu & ~(threads_per_core - 1);
 }
 
+static inline int cpu_last_thread_in_core(int cpu)
+{
+	return cpu | (threads_per_core - 1);
+}
+
+
+
 #endif /* _ASM_POWERPC_CPUTHREADS_H */
 

arch/powerpc/include/asm/device.h

@@ -6,7 +6,7 @@
 #ifndef _ASM_POWERPC_DEVICE_H
 #define _ASM_POWERPC_DEVICE_H
 
-struct dma_mapping_ops;
+struct dma_map_ops;
 struct device_node;
 
 struct dev_archdata {
@@ -14,8 +14,11 @@ struct dev_archdata {
 	struct device_node	*of_node;
 
 	/* DMA operations on that device */
-	struct dma_mapping_ops	*dma_ops;
+	struct dma_map_ops	*dma_ops;
 	void			*dma_data;
+#ifdef CONFIG_SWIOTLB
+	dma_addr_t		max_direct_dma_addr;
+#endif
 };
 
 static inline void dev_archdata_set_node(struct dev_archdata *ad,

arch/powerpc/include/asm/hardirq.h

-#ifndef _ASM_POWERPC_HARDIRQ_H
-#define _ASM_POWERPC_HARDIRQ_H
-#ifdef __KERNEL__
-
-#include <asm/irq.h>
-#include <asm/bug.h>
-
-/* The __last_jiffy_stamp field is needed to ensure that no decrementer
- * interrupt is lost on SMP machines. Since on most CPUs it is in the same
- * cache line as local_irq_count, it is cheap to access and is also used on UP
- * for uniformity.
- */
-typedef struct {
-	unsigned int __softirq_pending;	/* set_bit is used on this */
-	unsigned int __last_jiffy_stamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
-
-static inline void ack_bad_irq(int irq)
-{
-	printk(KERN_CRIT "illegal vector %d received!\n", irq);
-	BUG();
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HARDIRQ_H */
+#include <asm-generic/hardirq.h>

arch/powerpc/include/asm/hw_irq.h

@@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void);
 #define raw_irqs_disabled()		(local_get_flags() == 0)
 #define raw_irqs_disabled_flags(flags)	((flags) == 0)
 
+#ifdef CONFIG_PPC_BOOK3E
+#define __hard_irq_enable()	__asm__ __volatile__("wrteei 1": : :"memory");
+#define __hard_irq_disable()	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
 #define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
 #define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+#endif
 
 #define  hard_irq_disable()			\
 	do {					\

arch/powerpc/include/asm/iommu.h

@@ -35,16 +35,6 @@
 #define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
 #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
 
-/* Cell page table entries */
-#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
-#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
-#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
-#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
-#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
-
 /* Boot time flags */
 extern int iommu_is_off;
 extern int iommu_force_on;