drivers/edac: fix e752x reversed csrows

Found a 'reversal' decoding bug in the driver.  This patch fixes that mapping
to correctly display the CSROW entries in their proper order.  Users will be
enable to correctly identifiy the failing DIMM with this fix.

[akpm@linux-foundation.org: unneeded (and undesirable) cast of void*]
Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac/e752x_edac.c

@@ -284,9 +284,6 @@ static void do_process_ce(struct mem_ctl_info *mci, u16 error_one,
 	/* 0 = channel A, 1 = channel B */
 	channel = !(error_one & 1);
 
-	if (!pvt->map_type)
-		row = 7 - row;
-
 	/* e752x mc reads 34:6 of the DRAM linear address */
 	edac_mc_handle_ce(mci, page, offset_in_page(sec1_add << 4),
 			sec1_syndrome, row, channel, "e752x CE");
@@ -774,6 +771,18 @@ static inline int dual_channel_active(u16 ddrcsr)
 	return (((ddrcsr >> 12) & 3) == 3);
 }
 
+/* Remap csrow index numbers if map_type is "reverse"
+ */
+static inline int remap_csrow_index(struct mem_ctl_info *mci, int index)
+{
+	struct e752x_pvt *pvt = mci->pvt_info;
+
+	if (!pvt->map_type)
+		return (7 - index);
+
+	return (index);
+}
+
 static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
 			u16 ddrcsr)
 {
@@ -804,7 +813,7 @@ static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
 	for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
 		/* mem_dev 0=x8, 1=x4 */
 		mem_dev = (dra >> (index * 4 + 2)) & 0x3;
-		csrow = &mci->csrows[index];
+		csrow = &mci->csrows[remap_csrow_index(mci, index)];
 
 		mem_dev = (mem_dev == 2);
 		pci_read_config_byte(pdev, E752X_DRB + index, &value);
@@ -844,7 +853,7 @@ static void e752x_init_mem_map_table(struct pci_dev *pdev,
 				struct e752x_pvt *pvt)
 {
 	int index;
-	u8 value, last, row, stat8;
+	u8 value, last, row;
 
 	last = 0;
 	row = 0;
@@ -873,10 +882,6 @@ static void e752x_init_mem_map_table(struct pci_dev *pdev,
 			last = value;
 		}
 	}
-
-	/* set the map type.  1 = normal, 0 = reversed */
-	pci_read_config_byte(pdev, E752X_DRM, &stat8);
-	pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
 }
 
 /* Return 0 on success or 1 on failure. */
@@ -1003,13 +1008,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	mci->edac_check = e752x_check;
 	mci->ctl_page_to_phys = ctl_page_to_phys;
 
-	e752x_init_csrows(mci, pdev, ddrcsr);
-	e752x_init_mem_map_table(pdev, pvt);
-
-	/* set the map type.  1 = normal, 0 = reversed */
+	/* set the map type.  1 = normal, 0 = reversed
+	 * Must be set before e752x_init_csrows in case csrow mapping
+	 * is reversed.
+	 */
 	pci_read_config_byte(pdev, E752X_DRM, &stat8);
 	pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
 
+	e752x_init_csrows(mci, pdev, ddrcsr);
+	e752x_init_mem_map_table(pdev, pvt);
+
 	mci->edac_cap |= EDAC_FLAG_NONE;
 	debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);