serial: core: Pass termios to set_ldisc() notifications

UART drivers which enable modem status interrupts when switching
to N_PPS line discipline need to determine if modem status
interrupts should be disabled when switching from N_PPS.
Specifically, the set_ldisc() notification needs to evaluate
UART_ENABLE_MS() which requires termios->c_cflag.

Convert in-tree UART drivers to new interface.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_core.c

@@ -2609,9 +2609,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 }
 
 static void
-serial8250_set_ldisc(struct uart_port *port, int new)
+serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
 {
-	if (new == N_PPS) {
+	if (termios->c_line == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		serial8250_enable_ms(port);
 	} else

drivers/tty/serial/amba-pl010.c

@@ -479,9 +479,9 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
-static void pl010_set_ldisc(struct uart_port *port, int new)
+static void pl010_set_ldisc(struct uart_port *port, struct ktermios *termios)
 {
-	if (new == N_PPS) {
+	if (termios->c_line == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		pl010_enable_ms(port);
 	} else

drivers/tty/serial/atmel_serial.c

@@ -2056,9 +2056,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static void atmel_set_ldisc(struct uart_port *port, int new)
+static void atmel_set_ldisc(struct uart_port *port, struct ktermios *termios)
 {
-	if (new == N_PPS) {
+	if (termios->c_line == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		atmel_enable_ms(port);
 	} else {

drivers/tty/serial/bfin_uart.c

@@ -944,12 +944,13 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
  * Enable the IrDA function if tty->ldisc.num is N_IRDA.
  * In other cases, disable IrDA function.
  */
-static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
+static void bfin_serial_set_ldisc(struct uart_port *port,
+				  struct ktermios *termios)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 	unsigned int val;
 
-	switch (ld) {
+	switch (termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(uart);
 		val |= (UMOD_IRDA | RPOLC);

drivers/tty/serial/clps711x.c

@@ -225,13 +225,14 @@ static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
 	writel(ubrlcr, port->membase + UBRLCR_OFFSET);
 }
 
-static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
+static void uart_clps711x_set_ldisc(struct uart_port *port,
+				    struct ktermios *termios)
 {
 	if (!port->line) {
 		struct clps711x_port *s = dev_get_drvdata(port->dev);
 
 		regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
-				   (ld == N_IRDA) ? SYSCON1_SIREN : 0);
+				   (termios->c_line == N_IRDA) ? SYSCON1_SIREN : 0);
 	}
 }
 

drivers/tty/serial/serial_core.c

@@ -1247,7 +1247,7 @@ static void uart_set_ldisc(struct tty_struct *tty)
 
 	if (uport->ops->set_ldisc) {
 		mutex_lock(&state->port.mutex);
-		uport->ops->set_ldisc(uport, tty->termios.c_line);
+		uport->ops->set_ldisc(uport, &tty->termios);
 		mutex_unlock(&state->port.mutex);
 	}
 }

include/linux/serial_core.h

@@ -63,7 +63,7 @@ struct uart_ops {
 	void		(*flush_buffer)(struct uart_port *);
 	void		(*set_termios)(struct uart_port *, struct ktermios *new,
 				       struct ktermios *old);
-	void		(*set_ldisc)(struct uart_port *, int new);
+	void		(*set_ldisc)(struct uart_port *, struct ktermios *);
 	void		(*pm)(struct uart_port *, unsigned int state,
 			      unsigned int oldstate);