Merge commit 'v2.6.27-rc3' into core/urgent

Documentation/DocBook/Makefile

@@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml
 C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
 $(obj)/procfs-guide.xml: $(C-procfs-example2)
 
+# List of programs to build
+##oops, this is a kernel module::hostprogs-y := procfs_example
+obj-m += procfs_example.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
 notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
 		   exit 1
 db2xtemplate = db2TYPE -o $(dir $@) $<

Documentation/DocBook/procfs_example.c

@@ -189,8 +189,6 @@ static int __init init_procfs_example(void)
 	return 0;
 
 no_symlink:
-	remove_proc_entry("tty", example_dir);
-no_tty:
 	remove_proc_entry("bar", example_dir);
 no_bar:
 	remove_proc_entry("foo", example_dir);
@@ -206,7 +204,6 @@ static int __init init_procfs_example(void)
 static void __exit cleanup_procfs_example(void)
 {
 	remove_proc_entry("jiffies_too", example_dir);
-	remove_proc_entry("tty", example_dir);
 	remove_proc_entry("bar", example_dir);
 	remove_proc_entry("foo", example_dir);
 	remove_proc_entry("jiffies", example_dir);
@@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example);
 
 MODULE_AUTHOR("Erik Mouw");
 MODULE_DESCRIPTION("procfs examples");
+MODULE_LICENSE("GPL");

Documentation/Makefile

+obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
+	filesystems/configfs/ ia64/ networking/ \
+	pcmcia/ spi/ video4linux/ vm/ watchdog/src/

Documentation/accounting/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := getdelays
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include

Documentation/accounting/getdelays.c

@@ -201,13 +201,19 @@ void print_delayacct(struct taskstats *t)
 	       "RECLAIM  %12s%15s\n"
 	       "      %15llu%15llu\n",
 	       "count", "real total", "virtual total", "delay total",
-	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
-	       t->cpu_delay_total,
+	       (unsigned long long)t->cpu_count,
+	       (unsigned long long)t->cpu_run_real_total,
+	       (unsigned long long)t->cpu_run_virtual_total,
+	       (unsigned long long)t->cpu_delay_total,
 	       "count", "delay total",
-	       t->blkio_count, t->blkio_delay_total,
-	       "count", "delay total", t->swapin_count, t->swapin_delay_total,
+	       (unsigned long long)t->blkio_count,
+	       (unsigned long long)t->blkio_delay_total,
 	       "count", "delay total",
-	       t->freepages_count, t->freepages_delay_total);
+	       (unsigned long long)t->swapin_count,
+	       (unsigned long long)t->swapin_delay_total,
+	       "count", "delay total",
+	       (unsigned long long)t->freepages_count,
+	       (unsigned long long)t->freepages_delay_total);
 }
 
 void task_context_switch_counts(struct taskstats *t)
@@ -215,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t)
 	printf("\n\nTask   %15s%15s\n"
 	       "       %15llu%15llu\n",
 	       "voluntary", "nonvoluntary",
-	       t->nvcsw, t->nivcsw);
+	       (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
 }
 
 void print_cgroupstats(struct cgroupstats *c)
 {
 	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
-		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
-		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+		"uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
+		(unsigned long long)c->nr_io_wait,
+		(unsigned long long)c->nr_running,
+		(unsigned long long)c->nr_stopped,
+		(unsigned long long)c->nr_uninterruptible);
 }
 
 

Documentation/auxdisplay/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := cfag12864b-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include

Documentation/connector/Makefile

+ifneq ($(CONFIG_CONNECTOR),)
+obj-m += cn_test.o
+endif
+
+# List of programs to build
+hostprogs-y := ucon
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include

Documentation/cpu-hotplug.txt

@@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't
 mark such hot-pluggable cpus as disabled entries, one could use this
 parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
 
-s390 uses the number of cpus it detects at IPL time to also the number of bits
-in cpu_possible_map. If it is desired to add additional cpus at a later time
-the number should be specified using this option or the possible_cpus option.
-
 possible_cpus=n		[s390 only] use this to set hotpluggable cpus.
 			This option sets possible_cpus bits in
 			cpu_possible_map. Thus keeping the numbers of bits set
 			constant even if the machine gets rebooted.
-			This option overrides additional_cpus.
 
 CPU maps and such
 -----------------

Documentation/feature-removal-schedule.txt

@@ -19,15 +19,6 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:	old NCR53C9x driver
-When:	October 2007
-Why:	Replaced by the much better esp_scsi driver.  Actual low-level
-	driver can be ported over almost trivially.
-Who:	David Miller <davem@davemloft.net>
-	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	December 2008
 Files:	include/linux/video_decoder.h include/linux/videodev.h
@@ -205,19 +196,6 @@ Who:  Tejun Heo <htejun@gmail.com>
 
 ---------------------------
 
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why:  The arch/powerpc tree is the merged architecture for ppc32 and ppc64
-      platforms.  Currently there are efforts underway to port the remaining
-      arch/ppc platforms to the merged tree.  New submissions to the arch/ppc
-      tree have been frozen with the 2.6.22 kernel release and that tree will
-      remain in bug-fix only mode until its scheduled removal.  Platforms
-      that are not ported by June 2008 will be removed due to the lack of an
-      interested maintainer.
-Who:  linuxppc-dev@ozlabs.org
-
----------------------------
-
 What:	i386/x86_64 bzImage symlinks
 When:	April 2010
 

Documentation/filesystems/configfs/Makefile

+ifneq ($(CONFIG_CONFIGFS_FS),)
+obj-m += configfs_example_explicit.o configfs_example_macros.o
+endif

Documentation/filesystems/quota.txt

@@ -3,14 +3,14 @@ Quota subsystem
 ===============
 
 Quota subsystem allows system administrator to set limits on used space and
-number of used inodes (inode is a filesystem structure which is associated
-with each file or directory) for users and/or groups. For both used space and
-number of used inodes there are actually two limits. The first one is called
-softlimit and the second one hardlimit.  An user can never exceed a hardlimit
-for any resource. User is allowed to exceed softlimit but only for limited
-period of time. This period is called "grace period" or "grace time". When
-grace time is over, user is not able to allocate more space/inodes until he
-frees enough of them to get below softlimit.
+number of used inodes (inode is a filesystem structure which is associated with
+each file or directory) for users and/or groups. For both used space and number
+of used inodes there are actually two limits. The first one is called softlimit
+and the second one hardlimit.  An user can never exceed a hardlimit for any
+resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed
+softlimit but only for limited period of time. This period is called "grace
+period" or "grace time". When grace time is over, user is not able to allocate
+more space/inodes until he frees enough of them to get below softlimit.
 
 Quota limits (and amount of grace time) are set independently for each
 filesystem.
@@ -53,6 +53,12 @@ in parentheses):
 		QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded
 		  longer than given grace period.
 		QUOTA_NL_BSOFTWARN - space (block) softlimit
+	  - four warnings are also defined for the event when user stops
+	    exceeding some limit:
+		QUOTA_NL_IHARDBELOW - inode hardlimit
+		QUOTA_NL_ISOFTBELOW - inode softlimit
+		QUOTA_NL_BHARDBELOW - space (block) hardlimit
+		QUOTA_NL_BSOFTBELOW - space (block) softlimit
         QUOTA_NL_A_DEV_MAJOR (u32)
 	  - major number of a device with the affected filesystem
         QUOTA_NL_A_DEV_MINOR (u32)

Documentation/ia64/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := aliasing-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/lguest/lguest.c

@@ -1447,21 +1447,6 @@ static void configure_device(int fd, const char *tapif, u32 ipaddr)
 		err(1, "Bringing interface %s up", tapif);
 }
 
-static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
-{
-	struct ifreq ifr;
-
-	memset(&ifr, 0, sizeof(ifr));
-	strcpy(ifr.ifr_name, tapif);
-
-	/* SIOC stands for Socket I/O Control.  G means Get (vs S for Set
-	 * above).  IF means Interface, and HWADDR is hardware address.
-	 * Simple! */
-	if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
-		err(1, "getting hw address for %s", tapif);
-	memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
-}
-
 static int get_tun_device(char tapif[IFNAMSIZ])
 {
 	struct ifreq ifr;
@@ -1531,11 +1516,8 @@ static void setup_tun_net(char *arg)
 	p = strchr(arg, ':');
 	if (p) {
 		str2mac(p+1, conf.mac);
+		add_feature(dev, VIRTIO_NET_F_MAC);
 		*p = '\0';
-	} else {
-		p = arg + strlen(arg);
-		/* None supplied; query the randomly assigned mac. */
-		get_mac(ipfd, tapif, conf.mac);
 	}
 
 	/* arg is now either an IP address or a bridge name */
@@ -1547,13 +1529,10 @@ static void setup_tun_net(char *arg)
 	/* Set up the tun device. */
 	configure_device(ipfd, tapif, ip);
 
-	/* Tell Guest what MAC address to use. */
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
 	/* Expect Guest to handle everything except UFO */
 	add_feature(dev, VIRTIO_NET_F_CSUM);
 	add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
 	add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
 	add_feature(dev, VIRTIO_NET_F_GUEST_ECN);

Documentation/networking/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := ifenslave
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/networking/ifenslave.c

@@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
 
 		}
 
-		ipaddr = ifr.ifr_addr.sa_data;
+		ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
 		v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
 			slave_ifname, ifra[i].desc,
 			ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);

Documentation/pcmcia/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := crc32hash
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include

Documentation/pcmcia/crc32hash.c

@@ -26,7 +26,7 @@ int main(int argc, char **argv) {
 		printf("no string passed as argument\n");
 		return -1;
 	}
-	result = crc32(argv[1], strlen(argv[1]));
+	result = crc32((unsigned char const *)argv[1], strlen(argv[1]));
 	printf("0x%x\n", result);
 	return 0;
 }

Documentation/spi/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := spidev_test spidev_fdx
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include

Documentation/video4linux/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := v4lgrab
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/vm/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := slabinfo
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/watchdog/src/Makefile

+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := watchdog-simple watchdog-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

MAINTAINERS

@@ -2462,7 +2462,7 @@ L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
 S:	Maintained
 
-KERNEL NFSD
+KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 P:	J. Bruce Fields
 M:	bfields@fieldses.org
 P:	Neil Brown
@@ -3078,7 +3078,7 @@ M:	ja@ssi.bg
 L:	netdev@vger.kernel.org
 S:	Maintained
 
-NFS CLIENT
+NFS, SUNRPC, AND LOCKD CLIENTS
 P:	Trond Myklebust
 M:	Trond.Myklebust@netapp.com
 L:	linux-nfs@vger.kernel.org
@@ -4683,12 +4683,6 @@ L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
-ZF MACHZ WATCHDOG
-P:	Fernando Fuganti
-M:	fuganti@netbank.com.br
-W:	http://cvs.conectiva.com.br/drivers/ZFL-watchdog/
-S:	Maintained
-
 ZR36067 VIDEO FOR LINUX DRIVER
 P:	Ronald Bultje
 M:	rbultje@ronald.bitfreak.net

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
@@ -821,6 +821,9 @@ ifdef CONFIG_HEADERS_CHECK
 endif
 ifdef CONFIG_SAMPLES
 	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
 endif
 	$(call vmlinux-modpost)
 	$(call if_changed_rule,vmlinux__)
@@ -1166,7 +1169,7 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \
 #
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
+clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
 
 PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):

arch/avr32/Makefile

@@ -39,20 +39,6 @@ core-y					+= arch/avr32/mm/
 drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 libs-y					+= arch/avr32/lib/
 
-archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-
-include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-avr32
-	$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
-else
-	$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
-endif
-	@touch $@
-
-archprepare: include/asm-avr32/.arch
-
 CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
 
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec

arch/avr32/boards/atngw100/setup.c

@@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2];
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
 		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 10000000,
+		.max_speed_hz	= 8000000,
 		.chip_select	= 0,
 	},
 };

arch/avr32/boards/atstk1000/atstk1002.c

@@ -96,7 +96,7 @@ static struct mtd_partition *nand_part_info(int size, int *num_partitions)
 	return nand_partitions;
 }
 
-struct atmel_nand_data atstk1006_nand_data __initdata = {
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
 	.cle		= 21,
 	.ale		= 22,
 	.rdy_pin	= GPIO_PIN_PB(30),

arch/avr32/configs/atngw100_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:59 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 16:00:47 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -78,10 +78,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -98,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -174,6 +183,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
@@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -931,17 +981,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

arch/avr32/configs/atstk1003_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:33:05 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:34:44 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -80,10 +80,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 CONFIG_BOARD_ATSTK1003=y
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -184,6 +194,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-CONFIG_UIO=m
-# CONFIG_UIO_SMX is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
@@ -1063,6 +1086,7 @@ CONFIG_CRC7=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

arch/avr32/configs/atstk1004_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:34:57 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:38:56 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -69,10 +69,16 @@ CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 CONFIG_BOARD_ATSTK1004=y
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 # CONFIG_NMI_DEBUGGING is not set
@@ -147,6 +156,8 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -164,10 +175,6 @@ CONFIG_CMDLINE=""
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# I2C GPIO expanders:
 #
 
 #
-# I2C GPIO expanders:
+# PCI GPIO expanders:
 #
 
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -525,6 +536,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/avr32/mach-at32ap/Makefile

 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o

arch/avr32/mach-at32ap/at32ap700x.c

@@ -22,13 +22,13 @@
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
+#include <mach/hmatrix.h>
 #include <mach/portmux.h>
 #include <mach/sram.h>
 
 #include <video/atmel_lcdc.h>
 
 #include "clock.h"
-#include "hmatrix.h"
 #include "pio.h"
 #include "pm.h"
 
@@ -725,7 +725,7 @@ static struct clk pico_clk = {
  * HMATRIX
  * -------------------------------------------------------------------- */
 
-static struct clk hmatrix_clk = {
+struct clk at32_hmatrix_clk = {
 	.name		= "hmatrix_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
@@ -733,12 +733,6 @@ static struct clk hmatrix_clk = {
 	.index		= 2,
 	.users		= 1,
 };
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
 
 /*
  * Set bits in the HMATRIX Special Function Register (SFR) used by the
@@ -748,13 +742,7 @@ static struct clk hmatrix_clk = {
  */
 static inline void set_ebi_sfr_bits(u32 mask)
 {
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
 }
 
 /* --------------------------------------------------------------------
@@ -1779,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
 		ret = platform_device_add_resources(pdev,
@@ -1789,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
 		return -EINVAL;
@@ -1905,7 +1893,7 @@ at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
 				sizeof(struct atmel_nand_data)))
 		goto fail;
 
-	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
 	if (data->enable_pin)
 		at32_select_gpio(data->enable_pin,
 				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
@@ -2097,7 +2085,7 @@ struct clk *at32_clock_list[] = {
 	&pbb_clk,
 	&at32_pm_pclk,
 	&at32_intc0_pclk,
-	&hmatrix_clk,
+	&at32_hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
 	&sdramc_clk,

arch/avr32/mach-at32ap/clock.c

@@ -16,6 +16,8 @@
 #include <linux/device.h>
 #include <linux/string.h>
 
+#include <mach/chip.h>
+
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clk_lock);

arch/avr32/mach-at32ap/hmatrix.c

+/*
+ * High-Speed Bus Matrix helper functions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/chip.h>
+#include <mach/hmatrix.h>
+
+static inline void __hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	__raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+static inline u32 __hmatrix_read_reg(unsigned long offset)
+{
+	return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+/**
+ * hmatrix_write_reg - write HMATRIX configuration register
+ * @offset: register offset
+ * @value: value to be written to the register at @offset
+ */
+void hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	clk_enable(&at32_hmatrix_clk);
+	__hmatrix_write_reg(offset, value);
+	__hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_read_reg - read HMATRIX configuration register
+ * @offset: register offset
+ *
+ * Returns the value of the register at @offset.
+ */
+u32 hmatrix_read_reg(unsigned long offset)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+
+	return value;
+}
+
+/**
+ * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be set in the SFR
+ */
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value |= mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be cleared in the SFR
+ */
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value &= ~mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}

arch/avr32/mach-at32ap/hmatrix.h

-/*
- * Register definitions for High-Speed Bus Matrix
- */
-#ifndef __HMATRIX_H
-#define __HMATRIX_H
-
-/* HMATRIX register offsets */
-#define HMATRIX_MCFG0				0x0000
-#define HMATRIX_MCFG1				0x0004
-#define HMATRIX_MCFG2				0x0008
-#define HMATRIX_MCFG3				0x000c
-#define HMATRIX_MCFG4				0x0010
-#define HMATRIX_MCFG5				0x0014
-#define HMATRIX_MCFG6				0x0018
-#define HMATRIX_MCFG7				0x001c
-#define HMATRIX_MCFG8				0x0020
-#define HMATRIX_MCFG9				0x0024
-#define HMATRIX_MCFG10				0x0028
-#define HMATRIX_MCFG11				0x002c
-#define HMATRIX_MCFG12				0x0030
-#define HMATRIX_MCFG13				0x0034
-#define HMATRIX_MCFG14				0x0038
-#define HMATRIX_MCFG15				0x003c
-#define HMATRIX_SCFG0				0x0040
-#define HMATRIX_SCFG1				0x0044
-#define HMATRIX_SCFG2				0x0048
-#define HMATRIX_SCFG3				0x004c
-#define HMATRIX_SCFG4				0x0050
-#define HMATRIX_SCFG5				0x0054
-#define HMATRIX_SCFG6				0x0058
-#define HMATRIX_SCFG7				0x005c
-#define HMATRIX_SCFG8				0x0060
-#define HMATRIX_SCFG9				0x0064
-#define HMATRIX_SCFG10				0x0068
-#define HMATRIX_SCFG11				0x006c
-#define HMATRIX_SCFG12				0x0070
-#define HMATRIX_SCFG13				0x0074
-#define HMATRIX_SCFG14				0x0078
-#define HMATRIX_SCFG15				0x007c
-#define HMATRIX_PRAS0				0x0080
-#define HMATRIX_PRBS0				0x0084
-#define HMATRIX_PRAS1				0x0088
-#define HMATRIX_PRBS1				0x008c
-#define HMATRIX_PRAS2				0x0090
-#define HMATRIX_PRBS2				0x0094
-#define HMATRIX_PRAS3				0x0098
-#define HMATRIX_PRBS3				0x009c
-#define HMATRIX_PRAS4				0x00a0
-#define HMATRIX_PRBS4				0x00a4
-#define HMATRIX_PRAS5				0x00a8
-#define HMATRIX_PRBS5				0x00ac
-#define HMATRIX_PRAS6				0x00b0
-#define HMATRIX_PRBS6				0x00b4
-#define HMATRIX_PRAS7				0x00b8
-#define HMATRIX_PRBS7				0x00bc
-#define HMATRIX_PRAS8				0x00c0
-#define HMATRIX_PRBS8				0x00c4
-#define HMATRIX_PRAS9				0x00c8
-#define HMATRIX_PRBS9				0x00cc
-#define HMATRIX_PRAS10				0x00d0
-#define HMATRIX_PRBS10				0x00d4
-#define HMATRIX_PRAS11				0x00d8
-#define HMATRIX_PRBS11				0x00dc
-#define HMATRIX_PRAS12				0x00e0
-#define HMATRIX_PRBS12				0x00e4
-#define HMATRIX_PRAS13				0x00e8
-#define HMATRIX_PRBS13				0x00ec
-#define HMATRIX_PRAS14				0x00f0
-#define HMATRIX_PRBS14				0x00f4
-#define HMATRIX_PRAS15				0x00f8
-#define HMATRIX_PRBS15				0x00fc
-#define HMATRIX_MRCR				0x0100
-#define HMATRIX_SFR0				0x0110
-#define HMATRIX_SFR1				0x0114
-#define HMATRIX_SFR2				0x0118
-#define HMATRIX_SFR3				0x011c
-#define HMATRIX_SFR4				0x0120
-#define HMATRIX_SFR5				0x0124
-#define HMATRIX_SFR6				0x0128
-#define HMATRIX_SFR7				0x012c
-#define HMATRIX_SFR8				0x0130
-#define HMATRIX_SFR9				0x0134
-#define HMATRIX_SFR10				0x0138
-#define HMATRIX_SFR11				0x013c
-#define HMATRIX_SFR12				0x0140
-#define HMATRIX_SFR13				0x0144
-#define HMATRIX_SFR14				0x0148
-#define HMATRIX_SFR15				0x014c
-
-/* Bitfields in MCFGx */
-#define HMATRIX_ULBT_OFFSET			0
-#define HMATRIX_ULBT_SIZE			3
-
-/* Bitfields in SCFGx */
-#define HMATRIX_SLOT_CYCLE_OFFSET		0
-#define HMATRIX_SLOT_CYCLE_SIZE			8
-#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
-#define HMATRIX_DEFMSTR_TYPE_SIZE		2
-#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
-#define HMATRIX_FIXED_DEFMSTR_SIZE		4
-#define HMATRIX_ARBT_OFFSET			24
-#define HMATRIX_ARBT_SIZE			2
-
-/* Bitfields in PRASx */
-#define HMATRIX_M0PR_OFFSET			0
-#define HMATRIX_M0PR_SIZE			4
-#define HMATRIX_M1PR_OFFSET			4
-#define HMATRIX_M1PR_SIZE			4
-#define HMATRIX_M2PR_OFFSET			8
-#define HMATRIX_M2PR_SIZE			4
-#define HMATRIX_M3PR_OFFSET			12
-#define HMATRIX_M3PR_SIZE			4
-#define HMATRIX_M4PR_OFFSET			16
-#define HMATRIX_M4PR_SIZE			4
-#define HMATRIX_M5PR_OFFSET			20
-#define HMATRIX_M5PR_SIZE			4
-#define HMATRIX_M6PR_OFFSET			24
-#define HMATRIX_M6PR_SIZE			4
-#define HMATRIX_M7PR_OFFSET			28
-#define HMATRIX_M7PR_SIZE			4
-
-/* Bitfields in PRBSx */
-#define HMATRIX_M8PR_OFFSET			0
-#define HMATRIX_M8PR_SIZE			4
-#define HMATRIX_M9PR_OFFSET			4
-#define HMATRIX_M9PR_SIZE			4
-#define HMATRIX_M10PR_OFFSET			8
-#define HMATRIX_M10PR_SIZE			4
-#define HMATRIX_M11PR_OFFSET			12
-#define HMATRIX_M11PR_SIZE			4
-#define HMATRIX_M12PR_OFFSET			16
-#define HMATRIX_M12PR_SIZE			4
-#define HMATRIX_M13PR_OFFSET			20
-#define HMATRIX_M13PR_SIZE			4
-#define HMATRIX_M14PR_OFFSET			24
-#define HMATRIX_M14PR_SIZE			4
-#define HMATRIX_M15PR_OFFSET			28
-#define HMATRIX_M15PR_SIZE			4
-
-/* Bitfields in SFR4 */
-#define HMATRIX_CS1A_OFFSET			1
-#define HMATRIX_CS1A_SIZE			1
-#define HMATRIX_CS3A_OFFSET			3
-#define HMATRIX_CS3A_SIZE			1
-#define HMATRIX_CS4A_OFFSET			4
-#define HMATRIX_CS4A_SIZE			1
-#define HMATRIX_CS5A_OFFSET			5
-#define HMATRIX_CS5A_SIZE			1
-#define HMATRIX_DBPUC_OFFSET			8
-#define HMATRIX_DBPUC_SIZE			1
-
-/* Constants for ULBT */
-#define HMATRIX_ULBT_INFINITE			0
-#define HMATRIX_ULBT_SINGLE			1
-#define HMATRIX_ULBT_FOUR_BEAT			2
-#define HMATRIX_ULBT_EIGHT_BEAT			3
-#define HMATRIX_ULBT_SIXTEEN_BEAT		4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
-#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
-#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
-
-/* Constants for ARBT */
-#define HMATRIX_ARBT_ROUND_ROBIN		0
-#define HMATRIX_ARBT_FIXED_PRIORITY		1
-
-/* Bit manipulation macros */
-#define HMATRIX_BIT(name)					\
-	(1 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BF(name,value)					\
-	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
-	 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BFEXT(name,value)				\
-	(((value) >> HMATRIX_##name##_OFFSET)			\
-	 & ((1 << HMATRIX_##name##_SIZE) - 1))
-#define HMATRIX_BFINS(name,value,old)				\
-	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
-		    << HMATRIX_##name##_OFFSET))		\
-	 | HMATRIX_BF(name,value))
-
-#endif /* __HMATRIX_H */

arch/avr32/mach-at32ap/include/mach/at32ap700x.h

@@ -46,4 +46,41 @@
 #define DMAC_DMAREQ_2		9
 #define DMAC_DMAREQ_3		10
 
+/* HSB master IDs */
+#define HMATRIX_MASTER_CPU_DCACHE		0
+#define HMATRIX_MASTER_CPU_ICACHE		1
+#define HMATRIX_MASTER_PDC			2
+#define HMATRIX_MASTER_ISI			3
+#define HMATRIX_MASTER_USBA			4
+#define HMATRIX_MASTER_LCDC			5
+#define HMATRIX_MASTER_MACB0			6
+#define HMATRIX_MASTER_MACB1			7
+#define HMATRIX_MASTER_DMACA_M0			8
+#define HMATRIX_MASTER_DMACA_M1			9
+
+/* HSB slave IDs */
+#define HMATRIX_SLAVE_SRAM0			0
+#define HMATRIX_SLAVE_SRAM1			1
+#define HMATRIX_SLAVE_PBA			2
+#define HMATRIX_SLAVE_PBB			3
+#define HMATRIX_SLAVE_EBI			4
+#define HMATRIX_SLAVE_USBA			5
+#define HMATRIX_SLAVE_LCDC			6
+#define HMATRIX_SLAVE_DMACA			7
+
+/* Bits in HMATRIX SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE		(1 << 1)
+#define HMATRIX_EBI_NAND_ENABLE			(1 << 3)
+#define HMATRIX_EBI_CF0_ENABLE			(1 << 4)
+#define HMATRIX_EBI_CF1_ENABLE			(1 << 5)
+#define HMATRIX_EBI_PULLUP_DISABLE		(1 << 8)
+
+/*
+ * Base addresses of controllers that may be accessed early by
+ * platform code.
+ */
+#define PM_BASE		0xfff00000
+#define HMATRIX_BASE	0xfff00800
+#define SDRAMC_BASE	0xfff03800
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */

include/asm-avr32/arch-at32ap/init.h → arch/avr32/mach-at32ap/include/mach/chip.h

 /*
- * AT32AP platform initialization calls.
+ * AVR32 chip-specific definitions
  *
- * Copyright (C) 2006 Atmel Corporation
+ * Copyright (C) 2008 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_AVR32_AT32AP_INIT_H__
-#define __ASM_AVR32_AT32AP_INIT_H__
+#ifndef __ASM_AVR32_ARCH_CHIP_H__
+#define __ASM_AVR32_ARCH_CHIP_H__
 
-void setup_platform(void);
-void setup_board(void);
+#if defined(CONFIG_CPU_AT32AP700X)
+# include <mach/at32ap700x.h>
+#else
+# error Unknown chip type selected
+#endif
 
-void at32_setup_serial_console(unsigned int usart_id);
-
-#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
+#endif /* __ASM_AVR32_ARCH_CHIP_H__ */

arch/avr32/mach-at32ap/include/mach/hmatrix.h

+/*
+ * High-Speed Bus Matrix configuration registers
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HMATRIX_H
+#define __HMATRIX_H
+
+extern struct clk at32_hmatrix_clk;
+
+void hmatrix_write_reg(unsigned long offset, u32 value);
+u32 hmatrix_read_reg(unsigned long offset);
+
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+
+/* Master Configuration register */
+#define HMATRIX_MCFG(m)			(0x0000 + 4 * (m))
+/* Undefined length burst limit */
+# define HMATRIX_MCFG_ULBT_INFINITE	0	/* Infinite length */
+# define HMATRIX_MCFG_ULBT_SINGLE	1	/* Single Access */
+# define HMATRIX_MCFG_ULBT_FOUR_BEAT	2	/* Four beat */
+# define HMATRIX_MCFG_ULBT_EIGHT_BEAT	3	/* Eight beat */
+# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT	4	/* Sixteen beat */
+
+/* Slave Configuration register */
+#define HMATRIX_SCFG(s)			(0x0040 + 4 * (s))
+# define HMATRIX_SCFG_SLOT_CYCLE(x)	((x) <<  0)	/* Max burst cycles */
+# define HMATRIX_SCFG_DEFMSTR_NONE	(  0 << 16)	/* No default master */
+# define HMATRIX_SCFG_DEFMSTR_LAST	(  1 << 16)	/* Last def master */
+# define HMATRIX_SCFG_DEFMSTR_FIXED	(  2 << 16)	/* Fixed def master */
+# define HMATRIX_SCFG_FIXED_DEFMSTR(m)	((m) << 18)	/* Fixed master ID */
+# define HMATRIX_SCFG_ARBT_ROUND_ROBIN	(  0 << 24)	/* RR arbitration */
+# define HMATRIX_SCFG_ARBT_FIXED_PRIO	(  1 << 24)	/* Fixed priority */
+
+/* Slave Priority register A (master 0..7) */
+#define HMATRIX_PRAS(s)			(0x0080 + 8 * (s))
+# define HMATRIX_PRAS_PRIO(m, p)	((p) << ((m) * 4))
+
+/* Slave Priority register A (master 8..15) */
+#define HMATRIX_PRBS(s)			(0x0084 + 8 * (s))
+# define HMATRIX_PRBS_PRIO(m, p)	((p) << (((m) - 8) * 4))
+
+/* Master Remap Control Register */
+#define HMATRIX_MRCR				0x0100
+# define HMATRIX_MRCR_REMAP(m)		(  1 << (m))	/* Remap master m */
+
+/* Special Function Register. Bit definitions are chip-specific */
+#define HMATRIX_SFR(s)			(0x0110 + 4 * (s))
+
+#endif /* __HMATRIX_H */

arch/avr32/mach-at32ap/pm.c

@@ -14,12 +14,10 @@
 #include <asm/cacheflush.h>
 #include <asm/sysreg.h>
 
+#include <mach/chip.h>
 #include <mach/pm.h>
 #include <mach/sram.h>
 
-/* FIXME: This is only valid for AP7000 */
-#define SDRAMC_BASE	0xfff03800
-
 #include "sdramc.h"
 
 #define SRAM_PAGE_FLAGS	(SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1)	\

arch/avr32/mach-at32ap/pm.h

@@ -4,14 +4,6 @@
 #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
 #define __ARCH_AVR32_MACH_AT32AP_PM_H__
 
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is only used on AVR32 AP CPUs with segmentation enabled,
- * it's safe to not use ioremap. Generic drivers should of course
- * never do this.
- */
-#define AT32_PM_BASE	0xfff00000
-
 /* PM register offsets */
 #define PM_MCCTRL				0x0000
 #define PM_CKSEL				0x0004
@@ -113,8 +105,8 @@
 
 /* Register access macros */
 #define pm_readl(reg)							\
-	__raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
 #define pm_writel(reg,value)						\
-	__raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
 
 #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */

arch/h8300/mm/init.c

@@ -40,9 +40,6 @@
 
 #undef DEBUG
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
-extern void free_initmem(void);
-
 /*
  * BAD_PAGE is the page that is used for page faults when linux
  * is out-of-memory. Older versions of linux just did a
@@ -73,7 +70,7 @@ extern unsigned long memory_end;
  * The parameters are pointers to where to stick the starting and ending
  * addresses of available kernel virtual memory.
  */
-void paging_init(void)
+void __init paging_init(void)
 {
 	/*
 	 * Make sure start_mem is page aligned,  otherwise bootmem and
@@ -122,7 +119,7 @@ void paging_init(void)
 	}
 }
 
-void mem_init(void)
+void __init mem_init(void)
 {
 	int codek = 0, datak = 0, initk = 0;
 	/* DAVIDM look at setup memory map generically with reserved area */
@@ -178,7 +175,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 void
-free_initmem()
+free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;

arch/ia64/include/asm/sal.h

@@ -236,7 +236,7 @@ extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
 
 extern unsigned short sal_revision;	/* supported SAL spec revision */
 extern unsigned short sal_version;	/* SAL version; OEM dependent */
-#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+#define SAL_VERSION_CODE(major, minor) ((bin2bcd(major) << 8) | bin2bcd(minor))
 
 extern const char *ia64_sal_strerror (long status);
 extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);

arch/ia64/kernel/head.S

@@ -359,7 +359,31 @@ start_ap:
 	mov ar.rsc=0		// place RSE in enforced lazy mode
 	;;
 	loadrs			// clear the dirty partition
-	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
+	movl r19=__phys_per_cpu_start
+	mov r18=PERCPU_PAGE_SIZE
+	;;
+#ifndef CONFIG_SMP
+	add r19=r19,r18
+	;;
+#else
+(isAP)	br.few 2f
+	mov r20=r19
+	sub r19=r19,r18
+	;;
+	shr.u r18=r18,3
+1:
+	ld8 r21=[r20],8;;
+	st8[r19]=r21,8
+	adds r18=-1,r18;;
+	cmp4.lt p7,p6=0,r18
+(p7)	br.cond.dptk.few 1b
+2:
+#endif
+	tpa r19=r19
+	;;
+	.pred.rel.mutex isBP,isAP
+(isBP)	mov IA64_KR(PER_CPU_DATA)=r19	// per-CPU base for cpu0
+(isAP)	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
 	;;
 	mov ar.bspstore=r2	// establish the new RSE stack
 	;;

arch/ia64/kernel/setup.c

@@ -927,17 +927,19 @@ cpu_init (void)
 	if (smp_processor_id() == 0) {
 		cpu_set(0, per_cpu(cpu_sibling_map, 0));
 		cpu_set(0, cpu_core_map[0]);
+	} else {
+		/*
+		 * Set ar.k3 so that assembly code in MCA handler can compute
+		 * physical addresses of per cpu variables with a simple:
+		 *   phys = ar.k3 + &per_cpu_var
+		 * and the alt-dtlb-miss handler can set per-cpu mapping into
+		 * the TLB when needed. head.S already did this for cpu0.
+		 */
+		ia64_set_kr(IA64_KR_PER_CPU_DATA,
+			    ia64_tpa(cpu_data) - (long) __per_cpu_start);
 	}
 #endif
 
-	/*
-	 * We set ar.k3 so that assembly code in MCA handler can compute
-	 * physical addresses of per cpu variables with a simple:
-	 *   phys = ar.k3 + &per_cpu_var
-	 */
-	ia64_set_kr(IA64_KR_PER_CPU_DATA,
-		    ia64_tpa(cpu_data) - (long) __per_cpu_start);
-
 	get_max_cacheline_size();
 
 	/*

arch/ia64/kernel/smpboot.c

@@ -467,7 +467,9 @@ start_secondary (void *unused)
 {
 	/* Early console may use I/O ports */
 	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+#ifndef CONFIG_PRINTK_TIME
 	Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+#endif
 	efi_map_pal_code();
 	cpu_init();
 	preempt_disable();

arch/ia64/kernel/vmlinux.lds.S

@@ -215,6 +215,9 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
+#ifdef	CONFIG_SMP
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{

arch/ia64/mm/contig.c

@@ -163,8 +163,14 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
+		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+
 		first_time=0;
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+
+		__per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start;
+		per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0];
+
+		for (cpu = 1; cpu < NR_CPUS; cpu++) {
 			memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
 			cpu_data += PERCPU_PAGE_SIZE;
@@ -177,7 +183,7 @@ per_cpu_init (void)
 static inline void
 alloc_per_cpu_data(void)
 {
-	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
+	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1,
 				   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 }
 #else

arch/ia64/mm/discontig.c

@@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 	int cpu;
 
 	for_each_possible_early_cpu(cpu) {
-		if (node == node_cpuid[cpu].nid) {
+		if (cpu == 0) {
+			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			__per_cpu_offset[cpu] = (char*)cpu0_data -
+				__per_cpu_start;
+		} else if (node == node_cpuid[cpu].nid) {
 			memcpy(__va(cpu_data), __phys_per_cpu_start,
 			       __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char*)__va(cpu_data) -

arch/m68k/kernel/entry.S

@@ -747,4 +747,10 @@ sys_call_table:
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 

arch/m68knommu/include/asm/unistd.h

@@ -326,10 +326,16 @@
 #define __NR_fallocate		320
 #define __NR_timerfd_settime	321
 #define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		323
+#define NR_syscalls		329
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/m68knommu/kernel/syscalltable.S

@@ -341,6 +341,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall

arch/powerpc/Kconfig

@@ -42,9 +42,6 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
-config HAVE_GET_USER_PAGES_FAST
-	def_bool PPC64
-
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 

arch/powerpc/boot/dts/warp.dts

@@ -139,6 +139,11 @@ fpga@2,0 {
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,2000 {
+					compatible = "pika,fpga-sgl";
+			   		reg = <0x00000002 0x00002000 0x00000200>;
+				};
+
 				fpga@2,4000 {
 					compatible = "pika,fpga-sd";
 					reg = <0x00000002 0x00004000 0x00000A00>;
@@ -152,7 +157,7 @@ nor_flash@0,0 {
 					#size-cells = <1>;
 					partition@300000 {
 						label = "fpga";
-						reg = <0x0030000 0x00040000>;
+						reg = <0x0300000 0x00040000>;
 					};
 					partition@340000 {
 						label = "env";
@@ -181,7 +186,6 @@ IIC0: i2c@ef600700 {
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
-				index = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -191,6 +195,12 @@ ad7414@4a {
 					interrupts = <0x19 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
+
+				/* This will create 52 and 53 */
+				at24@52 {
+					compatible = "at,24c04";
+					reg = <0x52>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
@@ -209,7 +219,13 @@ GPIO1: gpio@ef600c00 {
 				led@31 {
 					compatible = "linux,gpio-led";
 					linux,name = ":green:";
-					gpios = <&GPIO1 0x30 0>;
+					gpios = <&GPIO1 31 0>;
+				};		
+	
+				led@30 {	
+					compatible = "linux,gpio-led";
+					linux,name = ":red:";
+					gpios = <&GPIO1 30 0>;
 				};
 			};
 

arch/powerpc/include/asm/mmu-hash64.h

@@ -278,7 +278,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 			  unsigned long trap);
 
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-			     unsigned long pstart, unsigned long mode,
+			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
 extern void set_huge_psize(int psize);
 extern void add_gpage(unsigned long addr, unsigned long page_size,

arch/powerpc/kernel/pci-common.c

@@ -650,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		}
 	}
 
-	/* Out of paranoia, let's put the ISA hole last if any */
-	if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
-		struct resource tmp = hose->mem_resources[isa_hole];
-		hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
-		hose->mem_resources[memno-1] = tmp;
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
 	}
 }
 

arch/powerpc/kernel/rtas.c

@@ -792,6 +792,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.token == RTAS_UNKNOWN_SERVICE)
 		return -EINVAL;
 
+	args.rets = &args.args[nargs];
+	memset(args.rets, 0, args.nret * sizeof(rtas_arg_t));
+
 	/* Need to handle ibm,suspend_me call specially */
 	if (args.token == ibm_suspend_me_token) {
 		rc = rtas_ibm_suspend_me(&args);
@@ -808,8 +811,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	enter_rtas(__pa(&rtas.args));
 	args = rtas.args;
 
-	args.rets = &args.args[nargs];
-
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
 	if (args.rets[0] == -1)

arch/powerpc/mm/hash_utils_64.c

@@ -151,39 +151,53 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
+static unsigned long htab_convert_pte_flags(unsigned long pteflags)
+{
+	unsigned long rflags = pteflags & 0x1fa;
+
+	/* _PAGE_EXEC -> NOEXEC */
+	if ((pteflags & _PAGE_EXEC) == 0)
+		rflags |= HPTE_R_N;
+
+	/* PP bits. PAGE_USER is already PP bit 0x2, so we only
+	 * need to add in 0x1 if it's a read-only user page
+	 */
+	if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) &&
+					 (pteflags & _PAGE_DIRTY)))
+		rflags |= 1;
+
+	/* Always add C */
+	return rflags | HPTE_R_C;
+}
 
 int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-		      unsigned long pstart, unsigned long mode,
+		      unsigned long pstart, unsigned long prot,
 		      int psize, int ssize)
 {
 	unsigned long vaddr, paddr;
 	unsigned int step, shift;
-	unsigned long tmp_mode;
 	int ret = 0;
 
 	shift = mmu_psize_defs[psize].shift;
 	step = 1 << shift;
 
+	prot = htab_convert_pte_flags(prot);
+
+	DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n",
+	    vstart, vend, pstart, prot, psize, ssize);
+
 	for (vaddr = vstart, paddr = pstart; vaddr < vend;
 	     vaddr += step, paddr += step) {
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
 		unsigned long va = hpt_va(vaddr, vsid, ssize);
 
-		tmp_mode = mode;
-		
-		/* Make non-kernel text non-executable */
-		if (!in_kernel_text(vaddr))
-			tmp_mode = mode | HPTE_R_N;
-
 		hash = hpt_hash(va, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
-		DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert);
-
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr,
-				tmp_mode, HPTE_V_BOLTED, psize, ssize);
+		ret = ppc_md.hpte_insert(hpteg, va, paddr, prot,
+					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
 			break;
@@ -519,9 +533,9 @@ static unsigned long __init htab_get_table_size(void)
 #ifdef CONFIG_MEMORY_HOTPLUG
 void create_section_mapping(unsigned long start, unsigned long end)
 {
-		BUG_ON(htab_bolt_mapping(start, end, __pa(start),
-			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
-			mmu_linear_psize, mmu_kernel_ssize));
+	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+				 PAGE_KERNEL, mmu_linear_psize,
+				 mmu_kernel_ssize));
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)
@@ -570,7 +584,7 @@ void __init htab_initialize(void)
 {
 	unsigned long table;
 	unsigned long pteg_count;
-	unsigned long mode_rw;
+	unsigned long prot, tprot;
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
@@ -628,7 +642,7 @@ void __init htab_initialize(void)
 		mtspr(SPRN_SDR1, _SDR1);
 	}
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
+	prot = PAGE_KERNEL;
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
@@ -646,8 +660,10 @@ void __init htab_initialize(void)
 	for (i=0; i < lmb.memory.cnt; i++) {
 		base = (unsigned long)__va(lmb.memory.region[i].base);
 		size = lmb.memory.region[i].size;
+		tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0);
 
-		DBG("creating mapping for region: %lx : %lx\n", base, size);
+		DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
+		    base, size, tprot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
@@ -664,21 +680,21 @@ void __init htab_initialize(void)
 			unsigned long dart_table_end = dart_tablebase + 16 * MB;
 			if (base != dart_tablebase)
 				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
-							__pa(base), mode_rw,
+							__pa(base), tprot,
 							mmu_linear_psize,
 							mmu_kernel_ssize));
 			if ((base + size) > dart_table_end)
 				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
 							base + size,
 							__pa(dart_table_end),
-							 mode_rw,
+							 tprot,
 							 mmu_linear_psize,
 							 mmu_kernel_ssize));
 			continue;
 		}
 #endif /* CONFIG_U3_DART */
 		BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
-				mode_rw, mmu_linear_psize, mmu_kernel_ssize));
+				tprot, mmu_linear_psize, mmu_kernel_ssize));
        }
 
 	/*
@@ -696,7 +712,7 @@ void __init htab_initialize(void)
 			tce_alloc_start = base + size + 1;
 
 		BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
-					 __pa(tce_alloc_start), mode_rw,
+					 __pa(tce_alloc_start), prot,
 					 mmu_linear_psize, mmu_kernel_ssize));
 	}
 
@@ -1117,8 +1133,7 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 	unsigned long hash, hpteg;
 	unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
 	unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize);
-	unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY |
-		_PAGE_COHERENT | PP_RWXX | HPTE_R_N;
+	unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL);
 	int ret;
 
 	hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize);

arch/powerpc/mm/init_64.c

@@ -206,13 +206,10 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
-	unsigned long mode_rw;
 	unsigned long start = (unsigned long)start_page;
 	unsigned long end = (unsigned long)(start_page + nr_pages);
 	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
-
 	/* Align to the page size of the linear mapping. */
 	start = _ALIGN_DOWN(start, page_size);
 
@@ -230,9 +227,9 @@ int __meminit vmemmap_populate(struct page *start_page,
 		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
 			start, p, __pa(p));
 
-		mapped = htab_bolt_mapping(start, start + page_size,
-					__pa(p), mode_rw, mmu_vmemmap_psize,
-					mmu_kernel_ssize);
+		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
+					   PAGE_KERNEL, mmu_vmemmap_psize,
+					   mmu_kernel_ssize);
 		BUG_ON(mapped < 0);
 	}
 

arch/powerpc/platforms/44x/warp-nand.c

@@ -24,7 +24,7 @@
 
 static struct resource warp_ndfc = {
 	.start = WARP_NAND_FLASH_REG_ADDR,
-	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
+	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 

arch/powerpc/platforms/44x/warp.c

@@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
-static __initdata struct i2c_board_info warp_i2c_info[] = {
-	{ I2C_BOARD_INFO("ad7414", 0x4a) }
-};
-
-static int __init warp_arch_init(void)
-{
-	/* This should go away once support is moved to the dts. */
-	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
-	return 0;
-}
-machine_arch_initcall(warp, warp_arch_init);
-
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 
 	/* These registers are in 1 degree increments. */
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
-	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
 	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
 	if (np == NULL) {
@@ -289,8 +277,15 @@ static int pika_dtm_thread(void __iomem *fpga)
 	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
-		out_be32(fpga + 0x20, temp);
+		int val;
+
+		val = i2c_smbus_read_word_data(client, 0);
+		if (val < 0)
+			dev_dbg(&client->dev, "DTM read temp failed.\n");
+		else {
+			s16 temp = swab16(val);
+			out_be32(fpga + 0x20, temp);
+		}
 
 		pika_dtm_check_fan(fpga);