Commit 74340b0a authored by Patrick Boettcher's avatar Patrick Boettcher Committed by Mauro Carvalho Chehab

V4L/DVB (4457): Remove dib3000-common-module

removing the dib3000-common-module. The common stuff is not common anymore - it will be only used by the 3000mb-driver.
A new 3000mc/p-driver will be added which will share common stuff with dib7000.
Signed-off-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 46f73f93
......@@ -11,8 +11,8 @@ obj-$(CONFIG_DVB_CX22700) += cx22700.o
obj-$(CONFIG_DVB_CX24110) += cx24110.o
obj-$(CONFIG_DVB_TDA8083) += tda8083.o
obj-$(CONFIG_DVB_L64781) += l64781.o
obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o dib3000-common.o
obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dib3000-common.o
obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o
obj-$(CONFIG_DVB_MT312) += mt312.o
obj-$(CONFIG_DVB_VES1820) += ves1820.o
obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
......
#include "dib3000-common.h"
#ifdef CONFIG_DVB_DIBCOM_DEBUG
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c,4=srch (|-able)).");
#endif
#define deb_info(args...) dprintk(0x01,args)
#define deb_i2c(args...) dprintk(0x02,args)
#define deb_srch(args...) dprintk(0x04,args)
int dib3000_read_reg(struct dib3000_state *state, u16 reg)
{
u8 wb[] = { ((reg >> 8) | 0x80) & 0xff, reg & 0xff };
u8 rb[2];
struct i2c_msg msg[] = {
{ .addr = state->config.demod_address, .flags = 0, .buf = wb, .len = 2 },
{ .addr = state->config.demod_address, .flags = I2C_M_RD, .buf = rb, .len = 2 },
};
if (i2c_transfer(state->i2c, msg, 2) != 2)
deb_i2c("i2c read error\n");
deb_i2c("reading i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,
(rb[0] << 8) | rb[1],(rb[0] << 8) | rb[1]);
return (rb[0] << 8) | rb[1];
}
int dib3000_write_reg(struct dib3000_state *state, u16 reg, u16 val)
{
u8 b[] = {
(reg >> 8) & 0xff, reg & 0xff,
(val >> 8) & 0xff, val & 0xff,
};
struct i2c_msg msg[] = {
{ .addr = state->config.demod_address, .flags = 0, .buf = b, .len = 4 }
};
deb_i2c("writing i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,val,val);
return i2c_transfer(state->i2c,msg, 1) != 1 ? -EREMOTEIO : 0;
}
int dib3000_search_status(u16 irq,u16 lock)
{
if (irq & 0x02) {
if (lock & 0x01) {
deb_srch("auto search succeeded\n");
return 1; // auto search succeeded
} else {
deb_srch("auto search not successful\n");
return 0; // auto search failed
}
} else if (irq & 0x01) {
deb_srch("auto search failed\n");
return 0; // auto search failed
}
return -1; // try again
}
/* for auto search */
u16 dib3000_seq[2][2][2] = /* fft,gua, inv */
{ /* fft */
{ /* gua */
{ 0, 1 }, /* 0 0 { 0,1 } */
{ 3, 9 }, /* 0 1 { 0,1 } */
},
{
{ 2, 5 }, /* 1 0 { 0,1 } */
{ 6, 11 }, /* 1 1 { 0,1 } */
}
};
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de");
MODULE_DESCRIPTION("Common functions for the dib3000mb/dib3000mc dvb frontend drivers");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(dib3000_seq);
EXPORT_SYMBOL(dib3000_read_reg);
EXPORT_SYMBOL(dib3000_write_reg);
EXPORT_SYMBOL(dib3000_search_status);
/*
* .h-files for the common use of the frontend drivers made by DiBcom
* DiBcom 3000M-B/C, 3000P
*
* DiBcom (http://www.dibcom.fr/)
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
* based on GPL code from DibCom, which has
*
* Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
* Acknowledgements
*
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
* see Documentation/dvb/README.dibusb for more information
*
*/
#ifndef DIB3000_COMMON_H
#define DIB3000_COMMON_H
#include "dvb_frontend.h"
#include "dib3000.h"
/* info and err, taken from usb.h, if there is anything available like by default. */
#define err(format, arg...) printk(KERN_ERR "dib3000: " format "\n" , ## arg)
#define info(format, arg...) printk(KERN_INFO "dib3000: " format "\n" , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "dib3000: " format "\n" , ## arg)
/* frontend state */
struct dib3000_state {
struct i2c_adapter* i2c;
/* configuration settings */
struct dib3000_config config;
struct dvb_frontend frontend;
int timing_offset;
int timing_offset_comp_done;
fe_bandwidth_t last_tuned_bw;
u32 last_tuned_freq;
};
/* commonly used methods by the dib3000mb/mc/p frontend */
extern int dib3000_read_reg(struct dib3000_state *state, u16 reg);
extern int dib3000_write_reg(struct dib3000_state *state, u16 reg, u16 val);
extern int dib3000_search_status(u16 irq,u16 lock);
/* handy shortcuts */
#define rd(reg) dib3000_read_reg(state,reg)
#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \
{ err("while sending 0x%04x to 0x%04x.",val,reg); return -EREMOTEIO; }
#define wr_foreach(a,v) { int i; \
if (sizeof(a) != sizeof(v)) \
err("sizeof: %zu %zu is different",sizeof(a),sizeof(v));\
for (i=0; i < sizeof(a)/sizeof(u16); i++) \
wr(a[i],v[i]); \
}
#define set_or(reg,val) wr(reg,rd(reg) | val)
#define set_and(reg,val) wr(reg,rd(reg) & val)
/* debug */
#ifdef CONFIG_DVB_DIBCOM_DEBUG
#define dprintk(level,args...) \
do { if ((debug & level)) { printk(args); } } while (0)
#else
#define dprintk(args...) do { } while (0)
#endif
/* mask for enabling a specific pid for the pid_filter */
#define DIB3000_ACTIVATE_PID_FILTERING (0x2000)
/* common values for tuning */
#define DIB3000_ALPHA_0 ( 0)
#define DIB3000_ALPHA_1 ( 1)
#define DIB3000_ALPHA_2 ( 2)
#define DIB3000_ALPHA_4 ( 4)
#define DIB3000_CONSTELLATION_QPSK ( 0)
#define DIB3000_CONSTELLATION_16QAM ( 1)
#define DIB3000_CONSTELLATION_64QAM ( 2)
#define DIB3000_GUARD_TIME_1_32 ( 0)
#define DIB3000_GUARD_TIME_1_16 ( 1)
#define DIB3000_GUARD_TIME_1_8 ( 2)
#define DIB3000_GUARD_TIME_1_4 ( 3)
#define DIB3000_TRANSMISSION_MODE_2K ( 0)
#define DIB3000_TRANSMISSION_MODE_8K ( 1)
#define DIB3000_SELECT_LP ( 0)
#define DIB3000_SELECT_HP ( 1)
#define DIB3000_FEC_1_2 ( 1)
#define DIB3000_FEC_2_3 ( 2)
#define DIB3000_FEC_3_4 ( 3)
#define DIB3000_FEC_5_6 ( 5)
#define DIB3000_FEC_7_8 ( 7)
#define DIB3000_HRCH_OFF ( 0)
#define DIB3000_HRCH_ON ( 1)
#define DIB3000_DDS_INVERSION_OFF ( 0)
#define DIB3000_DDS_INVERSION_ON ( 1)
#define DIB3000_TUNER_WRITE_ENABLE(a) (0xffff & (a << 8))
#define DIB3000_TUNER_WRITE_DISABLE(a) (0xffff & ((a << 8) | (1 << 7)))
/* for auto search */
extern u16 dib3000_seq[2][2][2];
#define DIB3000_REG_MANUFACTOR_ID ( 1025)
#define DIB3000_I2C_ID_DIBCOM (0x01b3)
#define DIB3000_REG_DEVICE_ID ( 1026)
#define DIB3000MB_DEVICE_ID (0x3000)
#define DIB3000MC_DEVICE_ID (0x3001)
#define DIB3000P_DEVICE_ID (0x3002)
#endif // DIB3000_COMMON_H
......@@ -29,9 +29,10 @@
#include <linux/string.h>
#include <linux/slab.h>
#include "dib3000-common.h"
#include "dib3000mb_priv.h"
#include "dvb_frontend.h"
#include "dib3000.h"
#include "dib3000mb_priv.h"
/* Version information */
#define DRIVER_VERSION "0.1"
......@@ -44,10 +45,81 @@ module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe (|-able)).");
#endif
#define deb_info(args...) dprintk(0x01,args)
#define deb_i2c(args...) dprintk(0x02,args)
#define deb_srch(args...) dprintk(0x04,args)
#define deb_info(args...) dprintk(0x01,args)
#define deb_xfer(args...) dprintk(0x02,args)
#define deb_setf(args...) dprintk(0x04,args)
#define deb_getf(args...) dprintk(0x08,args)
#ifdef CONFIG_DVB_DIBCOM_DEBUG
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c,4=srch (|-able)).");
#endif
static int dib3000_read_reg(struct dib3000_state *state, u16 reg)
{
u8 wb[] = { ((reg >> 8) | 0x80) & 0xff, reg & 0xff };
u8 rb[2];
struct i2c_msg msg[] = {
{ .addr = state->config.demod_address, .flags = 0, .buf = wb, .len = 2 },
{ .addr = state->config.demod_address, .flags = I2C_M_RD, .buf = rb, .len = 2 },
};
if (i2c_transfer(state->i2c, msg, 2) != 2)
deb_i2c("i2c read error\n");
deb_i2c("reading i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,
(rb[0] << 8) | rb[1],(rb[0] << 8) | rb[1]);
return (rb[0] << 8) | rb[1];
}
static int dib3000_write_reg(struct dib3000_state *state, u16 reg, u16 val)
{
u8 b[] = {
(reg >> 8) & 0xff, reg & 0xff,
(val >> 8) & 0xff, val & 0xff,
};
struct i2c_msg msg[] = {
{ .addr = state->config.demod_address, .flags = 0, .buf = b, .len = 4 }
};
deb_i2c("writing i2c bus (reg: %5d 0x%04x, val: %5d 0x%04x)\n",reg,reg,val,val);
return i2c_transfer(state->i2c,msg, 1) != 1 ? -EREMOTEIO : 0;
}
static int dib3000_search_status(u16 irq,u16 lock)
{
if (irq & 0x02) {
if (lock & 0x01) {
deb_srch("auto search succeeded\n");
return 1; // auto search succeeded
} else {
deb_srch("auto search not successful\n");
return 0; // auto search failed
}
} else if (irq & 0x01) {
deb_srch("auto search failed\n");
return 0; // auto search failed
}
return -1; // try again
}
/* for auto search */
static u16 dib3000_seq[2][2][2] = /* fft,gua, inv */
{ /* fft */
{ /* gua */
{ 0, 1 }, /* 0 0 { 0,1 } */
{ 3, 9 }, /* 0 1 { 0,1 } */
},
{
{ 2, 5 }, /* 1 0 { 0,1 } */
{ 6, 11 }, /* 1 1 { 0,1 } */
}
};
static int dib3000mb_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep);
......
......@@ -13,6 +13,102 @@
#ifndef __DIB3000MB_PRIV_H_INCLUDED__
#define __DIB3000MB_PRIV_H_INCLUDED__
/* info and err, taken from usb.h, if there is anything available like by default. */
#define err(format, arg...) printk(KERN_ERR "dib3000: " format "\n" , ## arg)
#define info(format, arg...) printk(KERN_INFO "dib3000: " format "\n" , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "dib3000: " format "\n" , ## arg)
/* handy shortcuts */
#define rd(reg) dib3000_read_reg(state,reg)
#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \
{ err("while sending 0x%04x to 0x%04x.",val,reg); return -EREMOTEIO; }
#define wr_foreach(a,v) { int i; \
if (sizeof(a) != sizeof(v)) \
err("sizeof: %zu %zu is different",sizeof(a),sizeof(v));\
for (i=0; i < sizeof(a)/sizeof(u16); i++) \
wr(a[i],v[i]); \
}
#define set_or(reg,val) wr(reg,rd(reg) | val)
#define set_and(reg,val) wr(reg,rd(reg) & val)
/* debug */
#ifdef CONFIG_DVB_DIBCOM_DEBUG
#define dprintk(level,args...) \
do { if ((debug & level)) { printk(args); } } while (0)
#else
#define dprintk(args...) do { } while (0)
#endif
/* mask for enabling a specific pid for the pid_filter */
#define DIB3000_ACTIVATE_PID_FILTERING (0x2000)
/* common values for tuning */
#define DIB3000_ALPHA_0 ( 0)
#define DIB3000_ALPHA_1 ( 1)
#define DIB3000_ALPHA_2 ( 2)
#define DIB3000_ALPHA_4 ( 4)
#define DIB3000_CONSTELLATION_QPSK ( 0)
#define DIB3000_CONSTELLATION_16QAM ( 1)
#define DIB3000_CONSTELLATION_64QAM ( 2)
#define DIB3000_GUARD_TIME_1_32 ( 0)
#define DIB3000_GUARD_TIME_1_16 ( 1)
#define DIB3000_GUARD_TIME_1_8 ( 2)
#define DIB3000_GUARD_TIME_1_4 ( 3)
#define DIB3000_TRANSMISSION_MODE_2K ( 0)
#define DIB3000_TRANSMISSION_MODE_8K ( 1)
#define DIB3000_SELECT_LP ( 0)
#define DIB3000_SELECT_HP ( 1)
#define DIB3000_FEC_1_2 ( 1)
#define DIB3000_FEC_2_3 ( 2)
#define DIB3000_FEC_3_4 ( 3)
#define DIB3000_FEC_5_6 ( 5)
#define DIB3000_FEC_7_8 ( 7)
#define DIB3000_HRCH_OFF ( 0)
#define DIB3000_HRCH_ON ( 1)
#define DIB3000_DDS_INVERSION_OFF ( 0)
#define DIB3000_DDS_INVERSION_ON ( 1)
#define DIB3000_TUNER_WRITE_ENABLE(a) (0xffff & (a << 8))
#define DIB3000_TUNER_WRITE_DISABLE(a) (0xffff & ((a << 8) | (1 << 7)))
/* for auto search */
extern u16 dib3000_seq[2][2][2];
#define DIB3000_REG_MANUFACTOR_ID ( 1025)
#define DIB3000_I2C_ID_DIBCOM (0x01b3)
#define DIB3000_REG_DEVICE_ID ( 1026)
#define DIB3000MB_DEVICE_ID (0x3000)
#define DIB3000MC_DEVICE_ID (0x3001)
#define DIB3000P_DEVICE_ID (0x3002)
/* frontend state */
struct dib3000_state {
struct i2c_adapter* i2c;
/* configuration settings */
struct dib3000_config config;
struct dvb_frontend frontend;
int timing_offset;
int timing_offset_comp_done;
fe_bandwidth_t last_tuned_bw;
u32 last_tuned_freq;
};
/* register addresses and some of their default values */
/* restart subsystems */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment