Commit 7481cad4 authored by Michael Ellerman's avatar Michael Ellerman

selftests/powerpc: Add a test of counting larx/stcx

This is based on the count_instructions test.

However this one also counts the number of failed stcx's, and in
conjunction with knowing the size of the stcx loop, can calculate the
total number of instructions executed even in the face of
non-deterministic stcx failures.
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426114410.3917383-1-mpe@ellerman.id.au
parent 24ac99e9
...@@ -2,3 +2,4 @@ ...@@ -2,3 +2,4 @@
count_instructions count_instructions
l3_bank_test l3_bank_test
per_event_excludes per_event_excludes
count_stcx_fail
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
noarg: noarg:
$(MAKE) -C ../ $(MAKE) -C ../
TEST_GEN_PROGS := count_instructions l3_bank_test per_event_excludes TEST_GEN_PROGS := count_instructions count_stcx_fail l3_bank_test per_event_excludes
EXTRA_SOURCES := ../harness.c event.c lib.c ../utils.c EXTRA_SOURCES := ../harness.c event.c lib.c ../utils.c
top_srcdir = ../../../../.. top_srcdir = ../../../../..
...@@ -13,8 +13,12 @@ all: $(TEST_GEN_PROGS) ebb ...@@ -13,8 +13,12 @@ all: $(TEST_GEN_PROGS) ebb
$(TEST_GEN_PROGS): $(EXTRA_SOURCES) $(TEST_GEN_PROGS): $(EXTRA_SOURCES)
# loop.S can only be built 64-bit # loop.S can only be built 64-bit
$(OUTPUT)/count_instructions: CFLAGS += -m64
$(OUTPUT)/count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES) $(OUTPUT)/count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES)
$(CC) $(CFLAGS) -m64 -o $@ $^
$(OUTPUT)/count_stcx_fail: CFLAGS += -m64
$(OUTPUT)/count_stcx_fail: loop.S $(EXTRA_SOURCES)
$(OUTPUT)/per_event_excludes: ../utils.c $(OUTPUT)/per_event_excludes: ../utils.c
......
/*
* Copyright 2013, Michael Ellerman, IBM Corp.
* Licensed under GPLv2.
*/
#define _GNU_SOURCE
#include <stdio.h>
#include <stdbool.h>
#include <string.h>
#include <sys/prctl.h>
#include "event.h"
#include "utils.h"
#include "lib.h"
extern void thirty_two_instruction_loop_with_ll_sc(u64 loops, u64 *ll_sc_target);
static void setup_event(struct event *e, u64 config, int type, char *name)
{
event_init_opts(e, config, type, name);
e->attr.disabled = 1;
e->attr.exclude_kernel = 1;
e->attr.exclude_hv = 1;
e->attr.exclude_idle = 1;
}
static int do_count_loop(struct event *events, u64 instructions,
u64 overhead, bool report)
{
s64 difference, expected;
double percentage;
u64 dummy;
prctl(PR_TASK_PERF_EVENTS_ENABLE);
/* Run for 1M instructions */
thirty_two_instruction_loop_with_ll_sc(instructions >> 5, &dummy);
prctl(PR_TASK_PERF_EVENTS_DISABLE);
event_read(&events[0]);
event_read(&events[1]);
event_read(&events[2]);
expected = instructions + overhead + (events[2].result.value * 10);
difference = events[0].result.value - expected;
percentage = (double)difference / events[0].result.value * 100;
if (report) {
printf("-----\n");
event_report(&events[0]);
event_report(&events[1]);
event_report(&events[2]);
printf("Looped for %llu instructions, overhead %llu\n", instructions, overhead);
printf("Expected %llu\n", expected);
printf("Actual %llu\n", events[0].result.value);
printf("Delta %lld, %f%%\n", difference, percentage);
}
event_reset(&events[0]);
event_reset(&events[1]);
event_reset(&events[2]);
if (difference < 0)
difference = -difference;
/* Tolerate a difference below 0.0001 % */
difference *= 10000 * 100;
if (difference / events[0].result.value)
return -1;
return 0;
}
/* Count how many instructions it takes to do a null loop */
static u64 determine_overhead(struct event *events)
{
u64 current, overhead;
int i;
do_count_loop(events, 0, 0, false);
overhead = events[0].result.value;
for (i = 0; i < 100; i++) {
do_count_loop(events, 0, 0, false);
current = events[0].result.value;
if (current < overhead) {
printf("Replacing overhead %llu with %llu\n", overhead, current);
overhead = current;
}
}
return overhead;
}
#define PM_MRK_STCX_FAIL 0x03e158
#define PM_STCX_FAIL 0x01e058
static int test_body(void)
{
struct event events[3];
u64 overhead;
setup_event(&events[0], PERF_COUNT_HW_INSTRUCTIONS, PERF_TYPE_HARDWARE, "instructions");
setup_event(&events[1], PERF_COUNT_HW_CPU_CYCLES, PERF_TYPE_HARDWARE, "cycles");
setup_event(&events[2], PM_STCX_FAIL, PERF_TYPE_RAW, "stcx_fail");
if (event_open(&events[0])) {
perror("perf_event_open");
return -1;
}
if (event_open_with_group(&events[1], events[0].fd)) {
perror("perf_event_open");
return -1;
}
if (event_open_with_group(&events[2], events[0].fd)) {
perror("perf_event_open");
return -1;
}
overhead = determine_overhead(events);
printf("Overhead of null loop: %llu instructions\n", overhead);
/* Run for 1Mi instructions */
FAIL_IF(do_count_loop(events, 1000000, overhead, true));
/* Run for 10Mi instructions */
FAIL_IF(do_count_loop(events, 10000000, overhead, true));
/* Run for 100Mi instructions */
FAIL_IF(do_count_loop(events, 100000000, overhead, true));
/* Run for 1Bi instructions */
FAIL_IF(do_count_loop(events, 1000000000, overhead, true));
/* Run for 16Bi instructions */
FAIL_IF(do_count_loop(events, 16000000000, overhead, true));
/* Run for 64Bi instructions */
FAIL_IF(do_count_loop(events, 64000000000, overhead, true));
event_close(&events[0]);
event_close(&events[1]);
return 0;
}
static int count_ll_sc(void)
{
return eat_cpu(test_body);
}
int main(void)
{
return test_harness(count_ll_sc, "count_ll_sc");
}
...@@ -41,3 +41,38 @@ FUNC_START(thirty_two_instruction_loop) ...@@ -41,3 +41,38 @@ FUNC_START(thirty_two_instruction_loop)
subi r3,r3,1 subi r3,r3,1
b FUNC_NAME(thirty_two_instruction_loop) b FUNC_NAME(thirty_two_instruction_loop)
FUNC_END(thirty_two_instruction_loop) FUNC_END(thirty_two_instruction_loop)
FUNC_START(thirty_two_instruction_loop_with_ll_sc)
cmpdi r3,0
beqlr
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1 # 5
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
1: ldarx r6,0,r4 # 10
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1 # 15
addi r5,r5,1
addi r5,r5,1
stdcx. r6,0,r4
bne- 1b
addi r5,r5,1 # 20
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1 # 25
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1
addi r5,r5,1 # 30
subi r3,r3,1
b FUNC_NAME(thirty_two_instruction_loop_with_ll_sc)
FUNC_END(thirty_two_instruction_loop_with_ll_sc)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment