Commit 74ff81e1 authored by Linus Walleij's avatar Linus Walleij Committed by Ulf Hansson

mmc: sdhci: imx: Use the slot GPIO descriptor

Simplify things by making the i.MX SDHCI driver just use
slot GPIO with descriptors instead of passing around the global
GPIO numbers that we want to get rid of.

As it turns out, just one single board is using the platform
data to pass in GPIOs numbers for CD and WP, so we augment this
to use a machine descriptor table instead.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 0f6f3235
......@@ -20,6 +20,7 @@
#include <linux/mtd/plat-ram.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
......@@ -214,8 +215,6 @@ static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
#define SD1_GPIO_WP IMX_GPIO_NR(2, 23)
#define SD1_GPIO_CD IMX_GPIO_NR(2, 24)
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
......@@ -341,12 +340,21 @@ static int __init pcm043_otg_mode(char *options)
__setup("otg_mode=", pcm043_otg_mode);
static struct esdhc_platform_data sd1_pdata = {
.wp_gpio = SD1_GPIO_WP,
.cd_gpio = SD1_GPIO_CD,
.wp_type = ESDHC_WP_GPIO,
.cd_type = ESDHC_CD_GPIO,
};
static struct gpiod_lookup_table sd1_gpio_table = {
.dev_id = "sdhci-esdhc-imx35.0",
.table = {
/* Card detect: bank 2 offset 24 */
GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
/* Write protect: bank 2 offset 23 */
GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
{ },
},
};
/*
* Board specific initialization.
*/
......@@ -391,6 +399,7 @@ static void __init pcm043_late_init(void)
{
imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
gpiod_add_lookup_table(&sd1_gpio_table);
imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
}
......
......@@ -12,7 +12,6 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
......@@ -21,7 +20,6 @@
#include <linux/mmc/slot-gpio.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
#include <linux/pm_runtime.h>
......@@ -1139,8 +1137,12 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
if (of_get_property(np, "fsl,wp-controller", NULL))
boarddata->wp_type = ESDHC_WP_CONTROLLER;
boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
if (gpio_is_valid(boarddata->wp_gpio))
/*
* If we have this property, then activate WP check.
* Retrieveing and requesting the actual WP GPIO will happen
* in the call to mmc_of_parse().
*/
if (of_property_read_bool(np, "wp-gpios"))
boarddata->wp_type = ESDHC_WP_GPIO;
of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
......@@ -1198,7 +1200,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
host->mmc->parent->platform_data);
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO) {
err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
err = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request write-protect gpio!\n");
......@@ -1210,7 +1212,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
/* card_detect */
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request card-detect gpio!\n");
......
......@@ -30,15 +30,11 @@ enum cd_types {
*
* ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
*
* @wp_gpio: gpio for write_protect
* @cd_gpio: gpio for card_detect interrupt
* @wp_type: type of write_protect method (see wp_types enum above)
* @cd_type: type of card_detect method (see cd_types enum above)
*/
struct esdhc_platform_data {
unsigned int wp_gpio;
unsigned int cd_gpio;
enum wp_types wp_type;
enum cd_types cd_type;
int max_bus_width;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment