staging: comedi: dt282x: prevent "empty acquisition" async commands

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0 for both the analog input and output async commands. The (*do_cmd) for
both subdevices sets up and starts the command without handling the "empty
acquisition". This results in the interrupt functions trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/dt282x.c

@@ -728,11 +728,10 @@ static int dt282x_ai_cmdtest(struct comedi_device *dev,
 	err |= cfc_check_trigger_arg_min(&cmd->convert_arg, board->ai_speed);
 	err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
 
-	if (cmd->stop_src == TRIG_COUNT) {
-		/* any count is allowed */
-	} else {	/* TRIG_NONE */
+	if (cmd->stop_src == TRIG_COUNT)
+		err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+	else	/* TRIG_EXT | TRIG_NONE */
 		err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
-	}
 
 	if (err)
 		return 3;
@@ -890,11 +889,10 @@ static int dt282x_ao_cmdtest(struct comedi_device *dev,
 	err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
 	err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
 
-	if (cmd->stop_src == TRIG_COUNT) {
-		/* any count is allowed */
-	} else {	/* TRIG_NONE */
+	if (cmd->stop_src == TRIG_COUNT)
+		err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
+	else	/* TRIG_EXT | TRIG_NONE */
 		err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
-	}
 
 	if (err)
 		return 3;