Commit 759c0114 authored by Willy Tarreau's avatar Willy Tarreau Committed by Al Viro

pipe: limit the per-user amount of pages allocated in pipes

On no-so-small systems, it is possible for a single process to cause an
OOM condition by filling large pipes with data that are never read. A
typical process filling 4000 pipes with 1 MB of data will use 4 GB of
memory. On small systems it may be tricky to set the pipe max size to
prevent this from happening.

This patch makes it possible to enforce a per-user soft limit above
which new pipes will be limited to a single page, effectively limiting
them to 4 kB each, as well as a hard limit above which no new pipes may
be created for this user. This has the effect of protecting the system
against memory abuse without hurting other users, and still allowing
pipes to work correctly though with less data at once.

The limit are controlled by two new sysctls : pipe-user-pages-soft, and
pipe-user-pages-hard. Both may be disabled by setting them to zero. The
default soft limit allows the default number of FDs per process (1024)
to create pipes of the default size (64kB), thus reaching a limit of 64MB
before starting to create only smaller pipes. With 256 processes limited
to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB =
1084 MB of memory allocated for a user. The hard limit is disabled by
default to avoid breaking existing applications that make intensive use
of pipes (eg: for splicing).

Reported-by: socketpair@gmail.com
Reported-by: default avatarTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Mitigates: CVE-2013-4312 (Linux 2.0+)
Suggested-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarWilly Tarreau <w@1wt.eu>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
parent 558041d8
...@@ -32,6 +32,8 @@ Currently, these files are in /proc/sys/fs: ...@@ -32,6 +32,8 @@ Currently, these files are in /proc/sys/fs:
- nr_open - nr_open
- overflowuid - overflowuid
- overflowgid - overflowgid
- pipe-user-pages-hard
- pipe-user-pages-soft
- protected_hardlinks - protected_hardlinks
- protected_symlinks - protected_symlinks
- suid_dumpable - suid_dumpable
...@@ -159,6 +161,27 @@ The default is 65534. ...@@ -159,6 +161,27 @@ The default is 65534.
============================================================== ==============================================================
pipe-user-pages-hard:
Maximum total number of pages a non-privileged user may allocate for pipes.
Once this limit is reached, no new pipes may be allocated until usage goes
below the limit again. When set to 0, no limit is applied, which is the default
setting.
==============================================================
pipe-user-pages-soft:
Maximum total number of pages a non-privileged user may allocate for pipes
before the pipe size gets limited to a single page. Once this limit is reached,
new pipes will be limited to a single page in size for this user in order to
limit total memory usage, and trying to increase them using fcntl() will be
denied until usage goes below the limit again. The default value allows to
allocate up to 1024 pipes at their default size. When set to 0, no limit is
applied.
==============================================================
protected_hardlinks: protected_hardlinks:
A long-standing class of security issues is the hardlink-based A long-standing class of security issues is the hardlink-based
......
...@@ -38,6 +38,12 @@ unsigned int pipe_max_size = 1048576; ...@@ -38,6 +38,12 @@ unsigned int pipe_max_size = 1048576;
*/ */
unsigned int pipe_min_size = PAGE_SIZE; unsigned int pipe_min_size = PAGE_SIZE;
/* Maximum allocatable pages per user. Hard limit is unset by default, soft
* matches default values.
*/
unsigned long pipe_user_pages_hard;
unsigned long pipe_user_pages_soft = PIPE_DEF_BUFFERS * INR_OPEN_CUR;
/* /*
* We use a start+len construction, which provides full use of the * We use a start+len construction, which provides full use of the
* allocated memory. * allocated memory.
...@@ -583,20 +589,49 @@ pipe_fasync(int fd, struct file *filp, int on) ...@@ -583,20 +589,49 @@ pipe_fasync(int fd, struct file *filp, int on)
return retval; return retval;
} }
static void account_pipe_buffers(struct pipe_inode_info *pipe,
unsigned long old, unsigned long new)
{
atomic_long_add(new - old, &pipe->user->pipe_bufs);
}
static bool too_many_pipe_buffers_soft(struct user_struct *user)
{
return pipe_user_pages_soft &&
atomic_long_read(&user->pipe_bufs) >= pipe_user_pages_soft;
}
static bool too_many_pipe_buffers_hard(struct user_struct *user)
{
return pipe_user_pages_hard &&
atomic_long_read(&user->pipe_bufs) >= pipe_user_pages_hard;
}
struct pipe_inode_info *alloc_pipe_info(void) struct pipe_inode_info *alloc_pipe_info(void)
{ {
struct pipe_inode_info *pipe; struct pipe_inode_info *pipe;
pipe = kzalloc(sizeof(struct pipe_inode_info), GFP_KERNEL); pipe = kzalloc(sizeof(struct pipe_inode_info), GFP_KERNEL);
if (pipe) { if (pipe) {
pipe->bufs = kzalloc(sizeof(struct pipe_buffer) * PIPE_DEF_BUFFERS, GFP_KERNEL); unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
struct user_struct *user = get_current_user();
if (!too_many_pipe_buffers_hard(user)) {
if (too_many_pipe_buffers_soft(user))
pipe_bufs = 1;
pipe->bufs = kzalloc(sizeof(struct pipe_buffer) * pipe_bufs, GFP_KERNEL);
}
if (pipe->bufs) { if (pipe->bufs) {
init_waitqueue_head(&pipe->wait); init_waitqueue_head(&pipe->wait);
pipe->r_counter = pipe->w_counter = 1; pipe->r_counter = pipe->w_counter = 1;
pipe->buffers = PIPE_DEF_BUFFERS; pipe->buffers = pipe_bufs;
pipe->user = user;
account_pipe_buffers(pipe, 0, pipe_bufs);
mutex_init(&pipe->mutex); mutex_init(&pipe->mutex);
return pipe; return pipe;
} }
free_uid(user);
kfree(pipe); kfree(pipe);
} }
...@@ -607,6 +642,8 @@ void free_pipe_info(struct pipe_inode_info *pipe) ...@@ -607,6 +642,8 @@ void free_pipe_info(struct pipe_inode_info *pipe)
{ {
int i; int i;
account_pipe_buffers(pipe, pipe->buffers, 0);
free_uid(pipe->user);
for (i = 0; i < pipe->buffers; i++) { for (i = 0; i < pipe->buffers; i++) {
struct pipe_buffer *buf = pipe->bufs + i; struct pipe_buffer *buf = pipe->bufs + i;
if (buf->ops) if (buf->ops)
...@@ -998,6 +1035,7 @@ static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long nr_pages) ...@@ -998,6 +1035,7 @@ static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long nr_pages)
memcpy(bufs + head, pipe->bufs, tail * sizeof(struct pipe_buffer)); memcpy(bufs + head, pipe->bufs, tail * sizeof(struct pipe_buffer));
} }
account_pipe_buffers(pipe, pipe->buffers, nr_pages);
pipe->curbuf = 0; pipe->curbuf = 0;
kfree(pipe->bufs); kfree(pipe->bufs);
pipe->bufs = bufs; pipe->bufs = bufs;
...@@ -1069,6 +1107,11 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg) ...@@ -1069,6 +1107,11 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) { if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) {
ret = -EPERM; ret = -EPERM;
goto out; goto out;
} else if ((too_many_pipe_buffers_hard(pipe->user) ||
too_many_pipe_buffers_soft(pipe->user)) &&
!capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) {
ret = -EPERM;
goto out;
} }
ret = pipe_set_size(pipe, nr_pages); ret = pipe_set_size(pipe, nr_pages);
break; break;
......
...@@ -42,6 +42,7 @@ struct pipe_buffer { ...@@ -42,6 +42,7 @@ struct pipe_buffer {
* @fasync_readers: reader side fasync * @fasync_readers: reader side fasync
* @fasync_writers: writer side fasync * @fasync_writers: writer side fasync
* @bufs: the circular array of pipe buffers * @bufs: the circular array of pipe buffers
* @user: the user who created this pipe
**/ **/
struct pipe_inode_info { struct pipe_inode_info {
struct mutex mutex; struct mutex mutex;
...@@ -57,6 +58,7 @@ struct pipe_inode_info { ...@@ -57,6 +58,7 @@ struct pipe_inode_info {
struct fasync_struct *fasync_readers; struct fasync_struct *fasync_readers;
struct fasync_struct *fasync_writers; struct fasync_struct *fasync_writers;
struct pipe_buffer *bufs; struct pipe_buffer *bufs;
struct user_struct *user;
}; };
/* /*
...@@ -123,6 +125,8 @@ void pipe_unlock(struct pipe_inode_info *); ...@@ -123,6 +125,8 @@ void pipe_unlock(struct pipe_inode_info *);
void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *); void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
extern unsigned int pipe_max_size, pipe_min_size; extern unsigned int pipe_max_size, pipe_min_size;
extern unsigned long pipe_user_pages_hard;
extern unsigned long pipe_user_pages_soft;
int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *); int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
......
...@@ -835,6 +835,7 @@ struct user_struct { ...@@ -835,6 +835,7 @@ struct user_struct {
#endif #endif
unsigned long locked_shm; /* How many pages of mlocked shm ? */ unsigned long locked_shm; /* How many pages of mlocked shm ? */
unsigned long unix_inflight; /* How many files in flight in unix sockets */ unsigned long unix_inflight; /* How many files in flight in unix sockets */
atomic_long_t pipe_bufs; /* how many pages are allocated in pipe buffers */
#ifdef CONFIG_KEYS #ifdef CONFIG_KEYS
struct key *uid_keyring; /* UID specific keyring */ struct key *uid_keyring; /* UID specific keyring */
......
...@@ -1757,6 +1757,20 @@ static struct ctl_table fs_table[] = { ...@@ -1757,6 +1757,20 @@ static struct ctl_table fs_table[] = {
.proc_handler = &pipe_proc_fn, .proc_handler = &pipe_proc_fn,
.extra1 = &pipe_min_size, .extra1 = &pipe_min_size,
}, },
{
.procname = "pipe-user-pages-hard",
.data = &pipe_user_pages_hard,
.maxlen = sizeof(pipe_user_pages_hard),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
{
.procname = "pipe-user-pages-soft",
.data = &pipe_user_pages_soft,
.maxlen = sizeof(pipe_user_pages_soft),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
},
{ } { }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment