Commit 75af76d0 authored by Mel Gorman's avatar Mel Gorman Committed by Rafael J. Wysocki

intel_idle: Ignore _CST if control cannot be taken from the platform

e6d4f08a ("intel_idle: Use ACPI _CST on server systems") avoids
enabling c-states that have been disabled by the platform with the
exception of C1E.

Unfortunately, BIOS implementations are not always consistent in terms
of how capabilities are advertised and control cannot always be handed
over. If control cannot be handed over then intel_idle reports that "ACPI
_CST not found or not usable" but does not clear acpi_state_table.count
meaning the information is still partially used.

This patch ignores ACPI information if CST control cannot be requested from
the platform. This was only observed on a number of Haswell platforms that
had identical CPUs but not identical BIOS versions.  While this problem
may be rare overall, 24 separate test cases bisected to this specific
commit across 4 separate test machines and is worth addressing. If the
situation occurs, the kernel behaves as it did before commit e6d4f08a
and uses any c-states that are discovered.

The affected test cases were all ones that involved a small number of
processes -- exec microbenchmark, pipe microbenchmark, git test suite,
netperf, tbench with one client and system call microbenchmark. Each
case benefits from being able to use turboboost which is prevented if the
lower c-states are unavailable. This may mask real regressions specific
to older hardware so it is worth addressing.

C-state status before and after the patch

5.9.0-vanilla            POLL     latency:0      disabled:0 default:enabled
5.9.0-vanilla            C1       latency:2      disabled:0 default:enabled
5.9.0-vanilla            C1E      latency:10     disabled:0 default:enabled
5.9.0-vanilla            C3       latency:33     disabled:1 default:disabled
5.9.0-vanilla            C6       latency:133    disabled:1 default:disabled
5.9.0-ignore-cst-v1r1    POLL     latency:0      disabled:0 default:enabled
5.9.0-ignore-cst-v1r1    C1       latency:2      disabled:0 default:enabled
5.9.0-ignore-cst-v1r1    C1E      latency:10     disabled:0 default:enabled
5.9.0-ignore-cst-v1r1    C3       latency:33     disabled:0 default:enabled
5.9.0-ignore-cst-v1r1    C6       latency:133    disabled:0 default:enabled

Patch enables C3/C6.

Netperf UDP_STREAM

netperf-udp
                                      5.5.0                  5.9.0
                                    vanilla        ignore-cst-v1r1
Hmean     send-64         193.41 (   0.00%)      226.54 *  17.13%*
Hmean     send-128        392.16 (   0.00%)      450.54 *  14.89%*
Hmean     send-256        769.94 (   0.00%)      881.85 *  14.53%*
Hmean     send-1024      2994.21 (   0.00%)     3468.95 *  15.85%*
Hmean     send-2048      5725.60 (   0.00%)     6628.99 *  15.78%*
Hmean     send-3312      8468.36 (   0.00%)    10288.02 *  21.49%*
Hmean     send-4096     10135.46 (   0.00%)    12387.57 *  22.22%*
Hmean     send-8192     17142.07 (   0.00%)    19748.11 *  15.20%*
Hmean     send-16384    28539.71 (   0.00%)    30084.45 *   5.41%*

Fixes: e6d4f08a ("intel_idle: Use ACPI _CST on server systems")
Signed-off-by: default avatarMel Gorman <mgorman@techsingularity.net>
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent bae314dd
......@@ -1216,14 +1216,13 @@ static bool __init intel_idle_acpi_cst_extract(void)
if (!intel_idle_cst_usable())
continue;
if (!acpi_processor_claim_cst_control()) {
acpi_state_table.count = 0;
return false;
}
if (!acpi_processor_claim_cst_control())
break;
return true;
}
acpi_state_table.count = 0;
pr_debug("ACPI _CST not found or not usable\n");
return false;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment