Commit 760446f9 authored by Ganesh Goudar's avatar Ganesh Goudar Committed by David S. Miller

cxgb4: display serial config and vpd versions

print the versions of vpd and serial configuration file,
flashed to adapter, and cleanup the relevant code.
Signed-off-by: default avatarCasey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 04d8980b
......@@ -338,10 +338,12 @@ struct adapter_params {
unsigned int sf_nsec; /* # of flash sectors */
unsigned int sf_fw_start; /* start of FW image in flash */
unsigned int fw_vers;
unsigned int bs_vers; /* bootstrap version */
unsigned int tp_vers;
unsigned int er_vers; /* expansion ROM version */
unsigned int fw_vers; /* firmware version */
unsigned int bs_vers; /* bootstrap version */
unsigned int tp_vers; /* TP microcode version */
unsigned int er_vers; /* expansion ROM version */
unsigned int scfg_vers; /* Serial Configuration version */
unsigned int vpd_vers; /* VPD Version */
u8 api_vers[7];
unsigned short mtus[NMTUS];
......@@ -1407,6 +1409,10 @@ int t4_get_fw_version(struct adapter *adapter, u32 *vers);
int t4_get_bs_version(struct adapter *adapter, u32 *vers);
int t4_get_tp_version(struct adapter *adapter, u32 *vers);
int t4_get_exprom_version(struct adapter *adapter, u32 *vers);
int t4_get_scfg_version(struct adapter *adapter, u32 *vers);
int t4_get_vpd_version(struct adapter *adapter, u32 *vers);
int t4_get_version_info(struct adapter *adapter);
void t4_dump_version_info(struct adapter *adapter);
int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info,
const u8 *fw_data, unsigned int fw_size,
struct fw_hdr *card_fw, enum dev_state state, int *reset);
......
......@@ -3610,11 +3610,8 @@ static int adap_init0(struct adapter *adap)
* later reporting and B. to warn if the currently loaded firmware
* is excessively mismatched relative to the driver.)
*/
t4_get_fw_version(adap, &adap->params.fw_vers);
t4_get_bs_version(adap, &adap->params.bs_vers);
t4_get_tp_version(adap, &adap->params.tp_vers);
t4_get_exprom_version(adap, &adap->params.er_vers);
t4_get_version_info(adap);
ret = t4_check_fw_version(adap);
/* If firmware is too old (not supported by driver) force an update. */
if (ret)
......@@ -4560,56 +4557,8 @@ static void cxgb4_check_pcie_caps(struct adapter *adap)
/* Dump basic information about the adapter */
static void print_adapter_info(struct adapter *adapter)
{
/* Device information */
dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
adapter->params.vpd.id,
CHELSIO_CHIP_RELEASE(adapter->params.chip));
dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
adapter->params.vpd.sn, adapter->params.vpd.pn);
/* Firmware Version */
if (!adapter->params.fw_vers)
dev_warn(adapter->pdev_dev, "No firmware loaded\n");
else
dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));
/* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
* Firmware, so dev_info() is more appropriate here.)
*/
if (!adapter->params.bs_vers)
dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
else
dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));
/* TP Microcode Version */
if (!adapter->params.tp_vers)
dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
else
dev_info(adapter->pdev_dev,
"TP Microcode version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
/* Expansion ROM version */
if (!adapter->params.er_vers)
dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
else
dev_info(adapter->pdev_dev,
"Expansion ROM version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));
/* Hardware/Firmware/etc. Version/Revision IDs */
t4_dump_version_info(adapter);
/* Software/Hardware configuration */
dev_info(adapter->pdev_dev, "Configuration: %sNIC %s, %s capable\n",
......
......@@ -3076,6 +3076,179 @@ int t4_get_exprom_version(struct adapter *adap, u32 *vers)
return 0;
}
/**
* t4_get_vpd_version - return the VPD version
* @adapter: the adapter
* @vers: where to place the version
*
* Reads the VPD via the Firmware interface (thus this can only be called
* once we're ready to issue Firmware commands). The format of the
* VPD version is adapter specific. Returns 0 on success, an error on
* failure.
*
* Note that early versions of the Firmware didn't include the ability
* to retrieve the VPD version, so we zero-out the return-value parameter
* in that case to avoid leaving it with garbage in it.
*
* Also note that the Firmware will return its cached copy of the VPD
* Revision ID, not the actual Revision ID as written in the Serial
* EEPROM. This is only an issue if a new VPD has been written and the
* Firmware/Chip haven't yet gone through a RESET sequence. So it's best
* to defer calling this routine till after a FW_RESET_CMD has been issued
* if the Host Driver will be performing a full adapter initialization.
*/
int t4_get_vpd_version(struct adapter *adapter, u32 *vers)
{
u32 vpdrev_param;
int ret;
vpdrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_VPDREV));
ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
1, &vpdrev_param, vers);
if (ret)
*vers = 0;
return ret;
}
/**
* t4_get_scfg_version - return the Serial Configuration version
* @adapter: the adapter
* @vers: where to place the version
*
* Reads the Serial Configuration Version via the Firmware interface
* (thus this can only be called once we're ready to issue Firmware
* commands). The format of the Serial Configuration version is
* adapter specific. Returns 0 on success, an error on failure.
*
* Note that early versions of the Firmware didn't include the ability
* to retrieve the Serial Configuration version, so we zero-out the
* return-value parameter in that case to avoid leaving it with
* garbage in it.
*
* Also note that the Firmware will return its cached copy of the Serial
* Initialization Revision ID, not the actual Revision ID as written in
* the Serial EEPROM. This is only an issue if a new VPD has been written
* and the Firmware/Chip haven't yet gone through a RESET sequence. So
* it's best to defer calling this routine till after a FW_RESET_CMD has
* been issued if the Host Driver will be performing a full adapter
* initialization.
*/
int t4_get_scfg_version(struct adapter *adapter, u32 *vers)
{
u32 scfgrev_param;
int ret;
scfgrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_SCFGREV));
ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
1, &scfgrev_param, vers);
if (ret)
*vers = 0;
return ret;
}
/**
* t4_get_version_info - extract various chip/firmware version information
* @adapter: the adapter
*
* Reads various chip/firmware version numbers and stores them into the
* adapter Adapter Parameters structure. If any of the efforts fails
* the first failure will be returned, but all of the version numbers
* will be read.
*/
int t4_get_version_info(struct adapter *adapter)
{
int ret = 0;
#define FIRST_RET(__getvinfo) \
do { \
int __ret = __getvinfo; \
if (__ret && !ret) \
ret = __ret; \
} while (0)
FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
FIRST_RET(t4_get_scfg_version(adapter, &adapter->params.scfg_vers));
FIRST_RET(t4_get_vpd_version(adapter, &adapter->params.vpd_vers));
#undef FIRST_RET
return ret;
}
/**
* t4_dump_version_info - dump all of the adapter configuration IDs
* @adapter: the adapter
*
* Dumps all of the various bits of adapter configuration version/revision
* IDs information. This is typically called at some point after
* t4_get_version_info() has been called.
*/
void t4_dump_version_info(struct adapter *adapter)
{
/* Device information */
dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
adapter->params.vpd.id,
CHELSIO_CHIP_RELEASE(adapter->params.chip));
dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
adapter->params.vpd.sn, adapter->params.vpd.pn);
/* Firmware Version */
if (!adapter->params.fw_vers)
dev_warn(adapter->pdev_dev, "No firmware loaded\n");
else
dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));
/* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
* Firmware, so dev_info() is more appropriate here.)
*/
if (!adapter->params.bs_vers)
dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
else
dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));
/* TP Microcode Version */
if (!adapter->params.tp_vers)
dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
else
dev_info(adapter->pdev_dev,
"TP Microcode version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
/* Expansion ROM version */
if (!adapter->params.er_vers)
dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
else
dev_info(adapter->pdev_dev,
"Expansion ROM version: %u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));
/* Serial Configuration version */
dev_info(adapter->pdev_dev, "Serial Configuration version: %#x\n",
adapter->params.scfg_vers);
/* VPD Version */
dev_info(adapter->pdev_dev, "VPD version: %#x\n",
adapter->params.vpd_vers);
}
/**
* t4_check_fw_version - check if the FW is supported with this driver
* @adap: the adapter
......
......@@ -1124,6 +1124,8 @@ enum fw_params_param_dev {
FW_PARAMS_PARAM_DEV_MAXIRD_ADAPTER = 0x14, /* max supported adap IRD */
FW_PARAMS_PARAM_DEV_ULPTX_MEMWRITE_DSGL = 0x17,
FW_PARAMS_PARAM_DEV_FWCACHE = 0x18,
FW_PARAMS_PARAM_DEV_SCFGREV = 0x1A,
FW_PARAMS_PARAM_DEV_VPDREV = 0x1B,
FW_PARAMS_PARAM_DEV_RI_FR_NSMR_TPTE_WR = 0x1C,
FW_PARAMS_PARAM_DEV_MPSBGMAP = 0x1E,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment