Commit 7609a5e9 authored by Matt Ranostay's avatar Matt Ranostay Committed by Dmitry Torokhov

Input: cap11xx - add support for various cap11xx devices

There are variants of the cap11xx device with a varying number of
capacitance detection channels.
Signed-off-by: default avatarMatt Ranostay <mranostay@gmail.com>
Reviewed-by: default avatarDaniel Mack <daniel@zonque.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent c77fd0a4
...@@ -7,9 +7,10 @@ Required properties: ...@@ -7,9 +7,10 @@ Required properties:
compatible: Must contain one of: compatible: Must contain one of:
"microchip,cap1106" "microchip,cap1106"
"microchip,cap1126"
"microchip,cap1188"
reg: The I2C slave address of the device. reg: The I2C slave address of the device.
Only 0x28 is valid.
interrupts: Property describing the interrupt line the interrupts: Property describing the interrupt line the
device's ALERT#/CM_IRQ# pin is connected to. device's ALERT#/CM_IRQ# pin is connected to.
......
/* /*
* Input driver for Microchip CAP11xx based capacitive touch sensors * Input driver for Microchip CAP11xx based capacitive touch sensors
* *
*
* (c) 2014 Daniel Mack <linux@zonque.org> * (c) 2014 Daniel Mack <linux@zonque.org>
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
...@@ -54,8 +53,6 @@ ...@@ -54,8 +53,6 @@
#define CAP11XX_REG_MANUFACTURER_ID 0xfe #define CAP11XX_REG_MANUFACTURER_ID 0xfe
#define CAP11XX_REG_REVISION 0xff #define CAP11XX_REG_REVISION 0xff
#define CAP11XX_NUM_CHN 6
#define CAP11XX_PRODUCT_ID 0x55
#define CAP11XX_MANUFACTURER_ID 0x5d #define CAP11XX_MANUFACTURER_ID 0x5d
struct cap11xx_priv { struct cap11xx_priv {
...@@ -63,7 +60,24 @@ struct cap11xx_priv { ...@@ -63,7 +60,24 @@ struct cap11xx_priv {
struct input_dev *idev; struct input_dev *idev;
/* config */ /* config */
unsigned short keycodes[CAP11XX_NUM_CHN]; u32 keycodes[];
};
struct cap11xx_hw_model {
u8 product_id;
unsigned int num_channels;
};
enum {
CAP1106,
CAP1126,
CAP1188,
};
static const struct cap11xx_hw_model cap11xx_devices[] = {
[CAP1106] = { .product_id = 0x55, .num_channels = 6 },
[CAP1126] = { .product_id = 0x53, .num_channels = 6 },
[CAP1188] = { .product_id = 0x50, .num_channels = 8 },
}; };
static const struct reg_default cap11xx_reg_defaults[] = { static const struct reg_default cap11xx_reg_defaults[] = {
...@@ -150,7 +164,7 @@ static irqreturn_t cap11xx_thread_func(int irq_num, void *data) ...@@ -150,7 +164,7 @@ static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
if (ret < 0) if (ret < 0)
goto out; goto out;
for (i = 0; i < CAP11XX_NUM_CHN; i++) for (i = 0; i < priv->idev->keycodemax; i++)
input_report_key(priv->idev, priv->keycodes[i], input_report_key(priv->idev, priv->keycodes[i],
status & (1 << i)); status & (1 << i));
...@@ -187,11 +201,26 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, ...@@ -187,11 +201,26 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
struct device *dev = &i2c_client->dev; struct device *dev = &i2c_client->dev;
struct cap11xx_priv *priv; struct cap11xx_priv *priv;
struct device_node *node; struct device_node *node;
const struct cap11xx_hw_model *cap;
int i, error, irq, gain = 0; int i, error, irq, gain = 0;
unsigned int val, rev; unsigned int val, rev;
u32 gain32, keycodes[CAP11XX_NUM_CHN]; u32 gain32;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
return -EINVAL;
}
cap = &cap11xx_devices[id->driver_data];
if (!cap || !cap->num_channels) {
dev_err(dev, "Invalid device configuration\n");
return -EINVAL;
}
priv = devm_kzalloc(dev,
sizeof(*priv) +
cap->num_channels * sizeof(priv->keycodes[0]),
GFP_KERNEL);
if (!priv) if (!priv)
return -ENOMEM; return -ENOMEM;
...@@ -203,10 +232,10 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, ...@@ -203,10 +232,10 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
if (error) if (error)
return error; return error;
if (val != CAP11XX_PRODUCT_ID) { if (val != cap->product_id) {
dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
val, CAP11XX_PRODUCT_ID); val, cap->product_id);
return -ENODEV; return -ENXIO;
} }
error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val); error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
...@@ -216,7 +245,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, ...@@ -216,7 +245,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
if (val != CAP11XX_MANUFACTURER_ID) { if (val != CAP11XX_MANUFACTURER_ID) {
dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
val, CAP11XX_MANUFACTURER_ID); val, CAP11XX_MANUFACTURER_ID);
return -ENODEV; return -ENXIO;
} }
error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev); error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
...@@ -234,17 +263,12 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, ...@@ -234,17 +263,12 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
dev_err(dev, "Invalid sensor-gain value %d\n", gain32); dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
} }
BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
/* Provide some useful defaults */ /* Provide some useful defaults */
for (i = 0; i < ARRAY_SIZE(keycodes); i++) for (i = 0; i < cap->num_channels; i++)
keycodes[i] = KEY_A + i; priv->keycodes[i] = KEY_A + i;
of_property_read_u32_array(node, "linux,keycodes", of_property_read_u32_array(node, "linux,keycodes",
keycodes, ARRAY_SIZE(keycodes)); priv->keycodes, cap->num_channels);
for (i = 0; i < ARRAY_SIZE(keycodes); i++)
priv->keycodes[i] = keycodes[i];
error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
...@@ -268,17 +292,17 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, ...@@ -268,17 +292,17 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
if (of_property_read_bool(node, "autorepeat")) if (of_property_read_bool(node, "autorepeat"))
__set_bit(EV_REP, priv->idev->evbit); __set_bit(EV_REP, priv->idev->evbit);
for (i = 0; i < CAP11XX_NUM_CHN; i++) for (i = 0; i < cap->num_channels; i++)
__set_bit(priv->keycodes[i], priv->idev->keybit); __set_bit(priv->keycodes[i], priv->idev->keybit);
__clear_bit(KEY_RESERVED, priv->idev->keybit); __clear_bit(KEY_RESERVED, priv->idev->keybit);
priv->idev->keycode = priv->keycodes; priv->idev->keycode = priv->keycodes;
priv->idev->keycodesize = sizeof(priv->keycodes[0]); priv->idev->keycodesize = sizeof(priv->keycodes[0]);
priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes); priv->idev->keycodemax = cap->num_channels;
priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID; priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
priv->idev->id.product = CAP11XX_PRODUCT_ID; priv->idev->id.product = cap->product_id;
priv->idev->id.version = rev; priv->idev->id.version = rev;
priv->idev->open = cap11xx_input_open; priv->idev->open = cap11xx_input_open;
...@@ -312,12 +336,16 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, ...@@ -312,12 +336,16 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
static const struct of_device_id cap11xx_dt_ids[] = { static const struct of_device_id cap11xx_dt_ids[] = {
{ .compatible = "microchip,cap1106", }, { .compatible = "microchip,cap1106", },
{ .compatible = "microchip,cap1126", },
{ .compatible = "microchip,cap1188", },
{} {}
}; };
MODULE_DEVICE_TABLE(of, cap11xx_dt_ids); MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
static const struct i2c_device_id cap11xx_i2c_ids[] = { static const struct i2c_device_id cap11xx_i2c_ids[] = {
{ "cap1106", 0 }, { "cap1106", CAP1106 },
{ "cap1126", CAP1126 },
{ "cap1188", CAP1188 },
{} {}
}; };
MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment