drivers: net: xgene: fix RGMII 10/100Mb mode

This patch fixes the RGMII 10/100M mode by reprogramming the clock.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/apm/xgene/xgene_enet_hw.c

@@ -459,6 +459,45 @@ static void xgene_gmac_reset(struct xgene_enet_pdata *pdata)
 	xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, 0);
 }
 
+static void xgene_enet_configure_clock(struct xgene_enet_pdata *pdata)
+{
+	struct device *dev = &pdata->pdev->dev;
+
+	if (dev->of_node) {
+		struct clk *parent = clk_get_parent(pdata->clk);
+
+		switch (pdata->phy_speed) {
+		case SPEED_10:
+			clk_set_rate(parent, 2500000);
+			break;
+		case SPEED_100:
+			clk_set_rate(parent, 25000000);
+			break;
+		default:
+			clk_set_rate(parent, 125000000);
+			break;
+		}
+	}
+#ifdef CONFIG_ACPI
+	else {
+		switch (pdata->phy_speed) {
+		case SPEED_10:
+			acpi_evaluate_object(ACPI_HANDLE(dev),
+					     "S10", NULL, NULL);
+			break;
+		case SPEED_100:
+			acpi_evaluate_object(ACPI_HANDLE(dev),
+					     "S100", NULL, NULL);
+			break;
+		default:
+			acpi_evaluate_object(ACPI_HANDLE(dev),
+					     "S1G", NULL, NULL);
+			break;
+		}
+	}
+#endif
+}
+
 static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
 {
 	struct device *dev = &pdata->pdev->dev;
@@ -477,12 +516,14 @@ static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
 	switch (pdata->phy_speed) {
 	case SPEED_10:
 		ENET_INTERFACE_MODE2_SET(&mc2, 1);
+		intf_ctl &= ~(ENET_LHD_MODE | ENET_GHD_MODE);
 		CFG_MACMODE_SET(&icm0, 0);
 		CFG_WAITASYNCRD_SET(&icm2, 500);
 		rgmii &= ~CFG_SPEED_1250;
 		break;
 	case SPEED_100:
 		ENET_INTERFACE_MODE2_SET(&mc2, 1);
+		intf_ctl &= ~ENET_GHD_MODE;
 		intf_ctl |= ENET_LHD_MODE;
 		CFG_MACMODE_SET(&icm0, 1);
 		CFG_WAITASYNCRD_SET(&icm2, 80);
@@ -490,12 +531,15 @@ static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
 		break;
 	default:
 		ENET_INTERFACE_MODE2_SET(&mc2, 2);
+		intf_ctl &= ~ENET_LHD_MODE;
 		intf_ctl |= ENET_GHD_MODE;
-
+		CFG_MACMODE_SET(&icm0, 2);
+		CFG_WAITASYNCRD_SET(&icm2, 0);
 		if (dev->of_node) {
 			CFG_TXCLK_MUXSEL0_SET(&rgmii, pdata->tx_delay);
 			CFG_RXCLK_MUXSEL0_SET(&rgmii, pdata->rx_delay);
 		}
+		rgmii |= CFG_SPEED_1250;
 
 		xgene_enet_rd_csr(pdata, DEBUG_REG_ADDR, &value);
 		value |= CFG_BYPASS_UNISEC_TX | CFG_BYPASS_UNISEC_RX;
@@ -503,7 +547,7 @@ static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
 		break;
 	}
 
-	mc2 |= FULL_DUPLEX2;
+	mc2 |= FULL_DUPLEX2 | PAD_CRC;
 	xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_2_ADDR, mc2);
 	xgene_enet_wr_mcx_mac(pdata, INTERFACE_CONTROL_ADDR, intf_ctl);
 
@@ -522,6 +566,7 @@ static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
 	/* Rtype should be copied from FP */
 	xgene_enet_wr_csr(pdata, RSIF_RAM_DBG_REG0_ADDR, 0);
 	xgene_enet_wr_csr(pdata, RGMII_REG_0_ADDR, rgmii);
+	xgene_enet_configure_clock(pdata);
 
 	/* Rx-Tx traffic resume */
 	xgene_enet_wr_csr(pdata, CFG_LINK_AGGR_RESUME_0_ADDR, TX_PORT0);

drivers/net/ethernet/apm/xgene/xgene_enet_hw.h

@@ -181,6 +181,7 @@ enum xgene_enet_rm {
 #define ENET_LHD_MODE			BIT(25)
 #define ENET_GHD_MODE			BIT(26)
 #define FULL_DUPLEX2			BIT(0)
+#define PAD_CRC				BIT(2)
 #define SCAN_AUTO_INCR			BIT(5)
 #define TBYT_ADDR			0x38
 #define TPKT_ADDR			0x39

drivers/net/ethernet/apm/xgene/xgene_enet_main.c

@@ -698,7 +698,6 @@ static int xgene_enet_open(struct net_device *ndev)
 	else
 		schedule_delayed_work(&pdata->link_work, PHY_POLL_LINK_OFF);
 
-	netif_carrier_off(ndev);
 	netif_start_queue(ndev);
 
 	return ret;