Commit 766763db authored by Alexandre Bailon's avatar Alexandre Bailon Committed by Sekhar Nori

ARM: davinci: da8xx: Remove duplicated defines

Some macro for DA8xx CFGCHIP are defined in usb-davinci.h,
but da8xx-cfgchip.h intend to replace them.
Remove duplicated defines between da8xx-cfgchip.h and usb-davinci.h
Signed-off-by: default avatarAlexandre Bailon <abailon@baylibre.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent fc89017c
......@@ -18,6 +18,7 @@
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/platform_data/at24.h>
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
......@@ -116,7 +117,7 @@ static __init void da830_evm_usb_init(void)
cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB2.0 PHY reference clock is 24 MHz */
cfgchip2 &= ~CFGCHIP2_REFFREQ;
cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK;
cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ;
/*
......@@ -133,7 +134,7 @@ static __init void da830_evm_usb_init(void)
* controller won't be able to drive VBUS thinking that it's a B-device.
* Otherwise, we want to use the OTG mode and enable VBUS comparators.
*/
cfgchip2 &= ~CFGCHIP2_OTGMODE;
cfgchip2 &= ~CFGCHIP2_OTGMODE_MASK;
#ifdef CONFIG_USB_MUSB_HOST
cfgchip2 |= CFGCHIP2_FORCE_HOST;
#else
......
......@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/gpio.h>
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach-types.h>
......@@ -254,7 +255,7 @@ static __init void omapl138_hawk_usb_init(void)
/* Setup the Ref. clock frequency for the HAWK at 24 MHz. */
cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
cfgchip2 &= ~CFGCHIP2_REFFREQ;
cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK;
cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ;
__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
......
......@@ -11,29 +11,6 @@
#ifndef __ASM_ARCH_USB_H
#define __ASM_ARCH_USB_H
/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
#define CFGCHIP2_PHYCLKGD (1 << 17)
#define CFGCHIP2_VBUSSENSE (1 << 16)
#define CFGCHIP2_RESET (1 << 15)
#define CFGCHIP2_OTGMODE (3 << 13)
#define CFGCHIP2_NO_OVERRIDE (0 << 13)
#define CFGCHIP2_FORCE_HOST (1 << 13)
#define CFGCHIP2_FORCE_DEVICE (2 << 13)
#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
#define CFGCHIP2_PHYPWRDN (1 << 10)
#define CFGCHIP2_OTGPWRDN (1 << 9)
#define CFGCHIP2_DATPOL (1 << 8)
#define CFGCHIP2_USB1SUSPENDM (1 << 7)
#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
#define CFGCHIP2_REFFREQ (0xf << 0)
#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
struct da8xx_ohci_root_hub;
typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment